홈 / Beckhoff / EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC, 5 MHz, with 2 x digital output 24 V DC

요청 시 제공 가능

EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC, 5 MHz, with 2 x digital output 24 V DC

Name: EtherCAT Terminal, 1-channel encoder interface, incremental, 5 V DC, 5 MHz, with 2 x digital output 24 V DC
Brand: Beckhoff
SKU: EL5131

제조사 부품번호: EL5131 · 브랜드: Beckhoff

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	EL5xxx \| Position measurement
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

EL5131은(는) 언제 배송될 수 있나요?

EL5131은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

EL5131을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — EL5131에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 EL5131에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

The EL5131 EtherCAT Terminal is an interface for the direct connection of incremental encoders with differential signals (RS422) or single-ended signals (TTL and open collector). Two parameterizable 24 V DC push-pull, tristate outputs are available

사양

Specifications

Technology	incremental encoder interface, differential (RS422), single-ended (TTL, open collector), counter, pulse generator
Number of channels	1
Encoder connection	1 x A, B, C differential inputs (RS422): A, A̅ (inv), B, B̅ (inv), C, C̅ (inv) single-ended connection (TTL, open collector): A, B, C counter, pulse generator: A, B
Additional inputs	latch, gate/latch (24 V DC, TON > 1 µs), status input (max. 5 V DC, negative switching, TON > 10 µs)
Additional outputs	2 x push pull, ohmic switchable (tristate)
Encoder operating voltage	5 V DC (default), 12 V DC, 24 V DC switchable, 0.3 A (generated from the 24 V DC power contacts)
Load type	outputs ohmic, inductive, lamp load
Nominal output voltage	24 V DC (-15%/+20%)
Output current	push mode: max. 0.5 A per channel, pull mode: 0.15 A per channel
Switching times	outputs: typ. TON: 3 µs (push mode), typ. TOFF: 4 µs (pull mode), typ. 7 µs (tristate mode)
Short-circuit current	typ. 1 A (push mode), typ. 0,2 A (pull mode)
Counter	32 bit (default), 16/32 bit switchable
Limit frequency	RS422: 20 million increments/s with 4-fold evaluation, corresponding to 5 MHz, TTL: 4 million increments/s with 4-fold evaluation, corresponding to 1 MHz, open collector: 400 kilo increments/s with 4-fold evaluation, corresponding to 100 kHz
Quadrature decoder	4-fold evaluation (default), 2-fold, 1-fold evaluation switchable
Distributed clocks	yes
Resolution	1/256 bit microincrements
Current consumption power contacts	typ. 20 mA + load
Current consumption E-bus	typ. 240 mA
Wiring fail indication	yes, for RS422 encoder
Electrical isolation	500 V (E-bus/field potential)
Special features	open-circuit recognition, frequency, speed and duty cycle measurement, microincrements, timestamp on last incremental edge, zero pulse C, latch input, gate/latch 2 input and to the output switching limits
Weight	approx. 50 g
Operating temperature	0…55°C
Storage temperature	-25…+85°C
Relative humidity	95%, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. rating/installation pos.	IP20/variable
Approvals/markings	CE, UL
Design form	HD (High Density) housing with signal LEDs
Material	polycarbonate
Installation	on 35 mm DIN rail, conforming to EN 60715 with lock
Side by side mounting by means of	double slot and key connection
Marking	labeling of the BZxxxx series
Wiring	solid conductors (s): direct plug-in technique; fine-stranded conductors (st) and ferrule (f): spring actuation by screwdriver
Connection cross-section	s: 0.08…1.5 mm², st: 0.25…1.5 mm², f*: 0.14…0.75 mm²
Connection cross-section AWG	s: AWG28…16, st: AWG22…16, f*: AWG26…19
Stripping length	8…9 mm
Current load power contacts	Imax: 10 A
Dimensions (W x H x D)	12 mm x 100 mm x 68 mm