Current signal conditioner; Current input signal; Current and voltage output signal; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width; 2,50 mm²
見積もりを依頼する
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | Signal Conditioners and Isolation Amplifiers |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
857-550はいつ発送できますか？
857-550はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
857-550を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — 857-550の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — 857-550について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
<p><b>Short description:</b></p><p>This current signal conditioner measures both 0–1 A and 0–5 A AC/DC currents, converting the input signal to an standard analog signal at the output.</p><p><b>Digital switching output (DO):</b></p><p>The digital switching output (DO) allows signaling of a message. Two switching behaviors can be selected for the edge:</p><p>GND switching: For all values below the lower threshold or above the upper threshold, the digital output switches to “GND.”</p><p>U<sub>s</sub> switching: For all values below the lower threshold or above the upper threshold, the digital output (DO) matches the supply voltage level.</p><p> </p><p>The preset switching thresholds are 0% and 100% of the input measurement range. These thresholds can be adjusted via the PC configuration interface. The switching threshold hysteresis is 5 mA.</p><p> </p><p><b>Features:</b></p><ul><li>PC configuration interface</li><li>True RMS measurement or arithmetic mean value</li><li>Digital switching output (configurable switching thresholds)</li><li>Switchable filter function</li><li>Calibrated measurement range switching</li><li>3-way electrical isolation with 2.5 kV test voltage</li><li>Extremely fast response times</li><li>Measurement range overflow indication</li></ul>
仕様
Notes
| Safety Information | Input and output must be safely isolated from any hazardous live parts! |
| Note | Additional setting options via the WAGO Interface Configuration Software, Use shielded signal cables!Only use shielded signal cables for analog output signals.This ensures the device maintains its specified accuracy and immunity to interference, even when external disturbances affect the signal cable. |
Technical data - Configuration
| Configuration options | DIP switch, WAGO Interface Configuration Software |
Technical data - Input
| Input signal type | Current |
| Input signal (current) | 0 … 1 A AC/DC (IN 1), 0 … 5 A AC/DC (IN 2) |
| Frequency range | 16 … 400 Hz |
| Input resistance (current input) | 47 mΩ (IN 1), 10 mΩ (IN 2) |
| Input current (max.) | 10 A (IN 1; 5 s); 15 A (IN 2; 5 s) |
| Response threshold | 2 mA (IN 1); 4 mA (IN 2) |
Technical data - Output (analog)
| Output signal type | Current, Voltage |
| Output signal (voltage) | 0 … 5 V, 1 … 5 V, 0 … 10 V, 2 … 10 V |
| Output signal (current) | 0 … 10 mA, 2 … 10 mA, 0 … 20 mA, 4 … 20 mA |
| Load impedance (voltage output) | ≥ 2 kΩ (Temperature range restrictions may occur.) |
| Load impedance (current output) | ≤ 600 Ω Temperature range restrictions may occur. |
Technical data - Output (digital)
| Switching voltage (DO) max. | Supply voltage applied |
| Continuous current (DO) max. | 100 mA (no internal restriction) |
| Number of switching thresholds (DO) | 1 (adjustable) |
Technical data - Signal processing
| Measurement method | True RMS measurement; Arithmetic mean value |
| Software filter (adjustable) | Moving average value (filter level: 30) |
| Step response (typ.) | 60 ms |
Technical data - Measurement error
| Transmission error (typ.) | ≤ 0.1 % of upper-range value |
| Transmission error (max.) | ≤ 0.4 % of upper-range value |
| Temperature coefficient | ≤ 0.01 %/K |
Technical data - Power supply
| Power supply type | 24 VDC (SELV) |
| Nominal supply voltage U<sub>S</sub> | 24 VDC |
| Supply voltage range | ±30 % |
| Current consumption at nominal supply voltage | ≤ 40 mA (+ IDO) |
Safety and protection
| Rated voltage | 300 V |
| Protection type | IP20 |
Safety and protection - Test voltage
| Test voltage (input/output/supply) | 2.5 kVAC; 50 Hz; 1 min |
Safety and protection - Insulation coordination
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply) | Functional insulation |
| Insulation type (adjacent devices) | Reinforced insulation (safe isolation) |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 94 mm / 3.701 inches |
| Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.418 MJ |
| Weight | 64 g |
Environmental requirements
| Ambient temperature (operation) | -25 … +70 °C (At nominal current, in individual arrangement; -25 … +60 °C (block arrangement)) |
| Ambient temperature (storage) | -40 … +85 °C |
| Processing temperature | -25 … +50 °C |
| Temperature range of connection cable | ≥ (Tambient + 25 K) |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000 m |
Standards and specifications
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2 |
| EMC emission of interference | EN 61000-6-3; EN 61000-6-4 |
| Standards/specifications | EN 50121-3-2, DNV, EN 61010-2-201 |
Commercial data
| Product Group | 6 (INTERFACE ELECTRONIC) |
| PU (SPU) | 1 pcs |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4050821226734 |
| Customs tariff number | 85437090300 |
Product Classification
| UNSPSC | 41113630 |
| eCl@ss 10.0 | 27-21-01-23 |
| eCl@ss 9.0 | 27-21-01-23 |
| ETIM 9.0 | EC002475 |
| ETIM 10.0 | EC002475 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8, 79-94-7, 80-05-7 |
| REACH Candidate List Substance | 2,2',6,6'-tetrabromo-4,4'-isopropylidenediphenol, 4,4'-isopropylidenediphenol, Diboron trioxide, Lead, Lead monoxide, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)- |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 50f64a02-d6d3-4adb-a7b9-f815da2344ad |
| SCIP notification number (Belgium) | 0e04df68-4c33-4c78-ade6-82bf60716e8f |
| SCIP notification number (Bulgaria) | d1dc9f2a-4544-48c8-8c42-717ec18dc517 |
| SCIP notification number (Czech Republic) | 1a2ce406-9928-4d64-aeb5-27a0e58a61ff |
| SCIP notification number (Denmark) | 4e1a4190-497b-4457-98c6-445a2a2407aa |
| SCIP notification number (Finland) | 10e56fdb-95fd-4317-8b19-0eec048887fc |
| SCIP notification number (France) | 0152e5b3-4bb3-407b-962c-95da92c8f591 |
| SCIP notification number (Germany) | 7d05eaec-2f49-4372-825c-639900cb0cfa |
| SCIP notification number (Hungary) | 8a6d556b-a2a5-47d7-be2c-0f7f08b455aa |
| SCIP notification number (Italy) | 80363ecc-0750-47b3-8adc-6d8d376cb109 |
| SCIP notification number (Netherlands) | 4c0930d7-0757-44b2-a2ac-a852f21c8101 |
| SCIP notification number (Poland) | e163f598-e916-448a-8e77-616fb920165c |
| SCIP notification number (Romania) | c1c27efe-e372-4fb2-b5a4-5eac757ec01f |
| SCIP notification number (Sweden) | 6a471be4-9d63-4d9d-9da5-8ddf090e997c |
