お問い合わせにより対応可能

IFM SU8030

型番(MPN): SU8030 · ブランド: IFM
価格はお問い合わせください
見積もりを依頼する

担当者が通常1営業日以内に返信いたします — 詳しくは プライバシーポリシー.

12か月保証(新品)・3か月保証(中古・整備済み)
30日間返品可能、未使用品は返品手数料無料
配送業者

基本情報

在庫状況お問い合わせにより確認
カテゴリーUltrasonic flow meters
保証12か月(新品)・3か月(中古・整備済み)

配送・在庫状況

SU8030はいつ発送できますか?

SU8030はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。

SU8030を直接引き取ることはできますか?

オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。

エクスプレス配送は利用できますか?

はい — SU8030の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。

工場が停止しており緊急で必要です — 対応可能ですか?

重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — SU8030について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。

Accurate flow measurement of ultrapure water, water, oils and glycol solutions A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality Convenient operation via buttons or parameter setting via IO-Link

仕様

Product characteristics

Measuring range1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h
1...240 l/min60...14400 l/h
Process connectionthreaded connection G 1 external thread DN25

Application

Special featureGold-plated contacts
Mediaultra-pure water; water; hydrous media; glycol solutions; oils; coolants
Note on mediahydrous media: for media with >10 % additives, the repeatability is the only available value; low-viscosity oils with viscosity: 7...40 mm²/s (40 °C); high-viscosity oils with viscosity: 30...68 mm²/s (40 °C)
Medium temperature[°C] [°C]-20...100
Min. burst pressure150 bar; 15 MPa
150 bar15 MPa
Pressure rating100 bar; 10 MPa
100 bar10 MPa
Vacuum resistance[mbar] [mbar]-1000

Electrical data

Operating voltage[V] [V]18...32 DC; (to SELV/PELV)
Current consumption[mA] [mA]< 75
Protection classIII
Reverse polarity protectionyes
Power-on delay time[s] [s]5
Measuring principleultrasonic

Inputs

Inputscounter reset

Outputs

Total number of outputs2
Output signalswitching signal; pulse signal; analogue signal; IO-Link; frequency signal; diagnostic signal; totaliser switching signal
Electrical designPNP/NPN
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]2
Permanent current rating of switching output DC[mA] [mA]100
Switching frequency DC[Hz] [Hz]0...10000
Analogue current output[mA] [mA]4...20
Max. load[Ω] [Ω]500
Pulse outputflow rate meter
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes

Measuring/setting range

Measuring range1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h
1...240 l/min60...14400 l/h
Display range-288...288 l/min; -17280...17280 l/h; -14.642...14.642 m/s; -17.28...17.28 m³/h
-288...288 l/min-17280...17280 l/h
Resolution0.1 l/min; 1 l/h; 0.001 m/s; 0.002 m³/h
0.1 l/min1 l/h
Set point SP2.3...240 l/min; 139...14400 l/h; 0.118...12.202 m/s; 0.139...14.4 m³/h
2.3...240 l/min139...14400 l/h
Reset point rP1.1...238.8 l/min; 64...14325 l/h; 0.055...12.139 m/s; 0.064...14.325 m³/h
1.1...238.8 l/min64...14325 l/h
Analogue start point ASP-240...192 l/min; -14400...11522 l/h; -12.202...9.763 m/s; -14.4...11.522 m³/h
-240...192 l/min-14400...11522 l/h
Analogue end point AEP-192...240 l/min; -11522...14400 l/h; -9.763...12.202 m/s; -11.522...14.4 m³/h
-192...240 l/min-11522...14400 l/h
Low flow cut-off LFC1...12 l/min; 60...720 l/h; 0.051...0.61 m/s; 0.06...0.72 m³/h
1...12 l/min60...720 l/h
Frequency end point, FEP48.1...240 l/min; 2889...14400 l/h; 2.448...12.202 m/s; 2.89...14.4 m³/h
48.1...240 l/min2889...14400 l/h
Frequency at the end point FRP[Hz] [Hz]1...10000
Pulse length[s] [s]0.002...2
Pulse value0.02...99990000 I
Measuring range[°C] [°C]-20...100
Display range[°C] [°C]-44...124
Resolution[°C] [°C]0.1
Set point SP[°C] [°C]-19.6...100
Reset point rP[°C] [°C]-20...99.6
Analogue start point[°C] [°C]-20...76
Analogue end point[°C] [°C]4...100
Frequency start point, FSP[°C] [°C]-20...76
Frequency end point, FEP[°C] [°C]4...100

Accuracy / deviations

Accuracy (in the measuring range)glycol solutions (35%); ±(5,0 % MW + 0,5 % MEW); high-viscosity oils with viscosity 46mm2/s (40°C); ±(5,0 % MW + 0,5% MEW); low-viscosity oils with viscosity 10mm2/s (40°C); ±(5,0 % MW + 0,5% MEW); water; ± (1,0 % MW + 0,5 % MEW)
glycol solutions (35%)±(5,0 % MW + 0,5 % MEW)
high-viscosity oils with viscosity 46mm2/s (40°C)±(5,0 % MW + 0,5% MEW)
low-viscosity oils with viscosity 10mm2/s (40°C)±(5,0 % MW + 0,5% MEW)
water± (1,0 % MW + 0,5 % MEW)
Repeatability± 0,2 % MEW
Accuracy[K] [K]± 2,5 (Q > 5 % MEW)
Temperature coefficient[% of the span / 10 K] [% of the span / 10 K]0,2

Response times

Response time[s] [s]< 0.25; (dAP = 0, T09)
Damping process value dAP[s] [s]0...5
Dynamic response T05 / T09[s] [s]5,7 / 86

Software / programming

Diagnostic functionsdirection of flow detection; signal quality

Interfaces

Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1.3
SDCI standardIEC 61131-9: 2013-07
ProfilesBLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis
BLOBBinary Large Object transfer
Common - I&DIdentification and Diagnosis
Required master port typeA
Process data analogue3
Process data binary2
Min. process cycle time[ms] [ms]9.6
IO-Link process data (cyclical)totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1
totaliser32
Flow monitoring32
Temperature monitoring32
status4
Output 11
Output 21
Supported DeviceIDsdefault; 1758
default1758

Operating conditions

Ambient temperature[°C] [°C]-20...60
Storage temperature[°C] [°C]-25...80
ProtectionIP 67

Tests / approvals

EMCDIN 61326-1:2021
Shock resistanceDIN IEC 68-2-27; 20 g (11ms)
DIN IEC 68-2-2720 g (11ms)
Vibration resistanceDIN IEC 68-2-6; 20 g (10...2000Hz)
DIN IEC 68-2-620 g (10...2000Hz)
MTTF[years] [years]160
UL approvalUL approval no.; I034
UL approval no.I034
Pressure Equipment Directivecan be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]551.4
Housingrectangular
Type of mountinginlet pipe length 5xDN; outlet pipe length 1xDN
Dimensions[mm] [mm]130 x 48 x 65.2
Materialshousing: stainless steel (316L/1.4404); Display: PFA; Sealing Display: FKM; connector: PBT
Materials (wetted parts)Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal
Process connectionthreaded connection G 1 external thread DN25
Surface characteristics Ra/Rz of the wetted partsRa < 1.25 µm

Displays / operating elements

Displaycolour display 1,44", 128 x 128 pixels; Switching function; 2 x LED, yellow; diagnosis; 1 x LED, three-colour
Switching function2 x LED, yellow
diagnosis1 x LED, three-colour
Display unitl/min; l/h; m³/h; m/s

Accessories

Items suppliedFlat seal 2, Centellen; package insert

Remarks

RemarksMW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the accuracy indications are adhered to over the entire application area
Pack quantity1 pcs.

Electrical connection

Connector1 x M12; coding: A; Contacts: gold-plated
12か月保証すべての新品在庫が対象
3か月保証中古・整備済み部品が対象
30日間返品可能未使用品は返品手数料無料
世界中に配送追跡可能な迅速な配送を全世界へ

IFMの他の部品

IFM O8H205お問い合わせにより対応可能IFM O8H205
型番(MPN): O8H205 · IFM
価格はお問い合わせください
見積もりを依頼
IFM O8H206お問い合わせにより対応可能IFM O8H206
型番(MPN): O8H206 · IFM
価格はお問い合わせください
見積もりを依頼
IFM O8H207お問い合わせにより対応可能IFM O8H207
型番(MPN): O8H207 · IFM
価格はお問い合わせください
見積もりを依頼
IFM O8H202お問い合わせにより対応可能IFM O8H202
型番(MPN): O8H202 · IFM
価格はお問い合わせください
見積もりを依頼