متاح عند الطلب
IFM SU8030
رقم القطعة (MPN): SU8030 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Ultrasonic flow meters |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن SU8030؟
SU8030 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام SU8030 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـSU8030 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـSU8030، حسب التوفر والوجهة.
Accurate flow measurement of ultrapure water, water, oils and glycol solutions A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality Convenient operation via buttons or parameter setting via IO-Link
المواصفات
Product characteristics
| Measuring range | 1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h |
| 1...240 l/min | 60...14400 l/h |
| Process connection | threaded connection G 1 external thread DN25 |
Application
| Special feature | Gold-plated contacts |
| Media | ultra-pure water; water; hydrous media; glycol solutions; oils; coolants |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value; low-viscosity oils with viscosity: 7...40 mm²/s (40 °C); high-viscosity oils with viscosity: 30...68 mm²/s (40 °C) |
| Medium temperature[°C] [°C] | -20...100 |
| Min. burst pressure | 150 bar; 15 MPa |
| 150 bar | 15 MPa |
| Pressure rating | 100 bar; 10 MPa |
| 100 bar | 10 MPa |
| Vacuum resistance[mbar] [mbar] | -1000 |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; pulse signal; analogue signal; IO-Link; frequency signal; diagnostic signal; totaliser switching signal |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 1...240 l/min; 60...14400 l/h; 0.051...12.202 m/s; 0.06...14.4 m³/h |
| 1...240 l/min | 60...14400 l/h |
| Display range | -288...288 l/min; -17280...17280 l/h; -14.642...14.642 m/s; -17.28...17.28 m³/h |
| -288...288 l/min | -17280...17280 l/h |
| Resolution | 0.1 l/min; 1 l/h; 0.001 m/s; 0.002 m³/h |
| 0.1 l/min | 1 l/h |
| Set point SP | 2.3...240 l/min; 139...14400 l/h; 0.118...12.202 m/s; 0.139...14.4 m³/h |
| 2.3...240 l/min | 139...14400 l/h |
| Reset point rP | 1.1...238.8 l/min; 64...14325 l/h; 0.055...12.139 m/s; 0.064...14.325 m³/h |
| 1.1...238.8 l/min | 64...14325 l/h |
| Analogue start point ASP | -240...192 l/min; -14400...11522 l/h; -12.202...9.763 m/s; -14.4...11.522 m³/h |
| -240...192 l/min | -14400...11522 l/h |
| Analogue end point AEP | -192...240 l/min; -11522...14400 l/h; -9.763...12.202 m/s; -11.522...14.4 m³/h |
| -192...240 l/min | -11522...14400 l/h |
| Low flow cut-off LFC | 1...12 l/min; 60...720 l/h; 0.051...0.61 m/s; 0.06...0.72 m³/h |
| 1...12 l/min | 60...720 l/h |
| Frequency end point, FEP | 48.1...240 l/min; 2889...14400 l/h; 2.448...12.202 m/s; 2.89...14.4 m³/h |
| 48.1...240 l/min | 2889...14400 l/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.02...99990000 I |
| Measuring range[°C] [°C] | -20...100 |
| Display range[°C] [°C] | -44...124 |
| Resolution[°C] [°C] | 0.1 |
| Set point SP[°C] [°C] | -19.6...100 |
| Reset point rP[°C] [°C] | -20...99.6 |
| Analogue start point[°C] [°C] | -20...76 |
| Analogue end point[°C] [°C] | 4...100 |
| Frequency start point, FSP[°C] [°C] | -20...76 |
| Frequency end point, FEP[°C] [°C] | 4...100 |
Accuracy / deviations
| Accuracy (in the measuring range) | glycol solutions (35%); ±(5,0 % MW + 0,5 % MEW); high-viscosity oils with viscosity 46mm2/s (40°C); ±(5,0 % MW + 0,5% MEW); low-viscosity oils with viscosity 10mm2/s (40°C); ±(5,0 % MW + 0,5% MEW); water; ± (1,0 % MW + 0,5 % MEW) |
| glycol solutions (35%) | ±(5,0 % MW + 0,5 % MEW) |
| high-viscosity oils with viscosity 46mm2/s (40°C) | ±(5,0 % MW + 0,5% MEW) |
| low-viscosity oils with viscosity 10mm2/s (40°C) | ±(5,0 % MW + 0,5% MEW) |
| water | ± (1,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.25; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1758 |
| default | 1758 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 67 |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 160 |
| UL approval | UL approval no.; I034 |
| UL approval no. | I034 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 551.4 |
| Housing | rectangular |
| Type of mounting | inlet pipe length 5xDN; outlet pipe length 1xDN |
| Dimensions[mm] [mm] | 130 x 48 x 65.2 |
| Materials | housing: stainless steel (316L/1.4404); Display: PFA; Sealing Display: FKM; connector: PBT |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal |
| Process connection | threaded connection G 1 external thread DN25 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 1.25 µm |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; Switching function; 2 x LED, yellow; diagnosis; 1 x LED, three-colour |
| Switching function | 2 x LED, yellow |
| diagnosis | 1 x LED, three-colour |
| Display unit | l/min; l/h; m³/h; m/s |
Accessories
| Items supplied | Flat seal 2, Centellen; package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the accuracy indications are adhered to over the entire application area |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
