B&R BRMTP4-1 NEW Rev. C0

BRMTP4-1 Rev. C0
47 people are viewing this right now

Hurry Up! Only 3 left in stock!

In stock

Guarantee Safe Checkout

Brand : B&R
Material number:


  • Supply for Compact-S CPU, X2X Link and internal I/O power supply
  • Galvanic isolation of supply and CPU / X2X Link power supply
  • Redundancy of the CPU / X2X Link power supply possible through parallel operation of multiple power supply modules
  • RS232 configurable as an online interface
  • CAN bus

The power supply module is used together with an X20 Compact-S CPU. It has a feed for the Compact-S CPU, X2X Link and the internal I/O power supply.

State: New
Specification :
Short description
Power supply module 24 VDC power supply module for Compact-S CPU, X2X Link power supply and I/O
Interfaces 1x RS232, 1x CAN bus
General information
B&R ID code 0xEB03
Status indicators Overload, operating state, module status, RS232, CAN bus
Module run/error Yes, using LED status indicator and software
CAN bus data transfer Yes, using LED status indicator
RS232 data transfer Yes, using LED status indicator
Overload Yes, using LED status indicator and software
Power consumption for X2X Link power supply 1.42 W
Power consumption  
Internal I/O 0.6 W
Additional power dissipation caused by actuators (resistive) [W] -
CE Yes
ATEX Zone 2, II 3G Ex nA nC IIA T5 Gc
IP20, Ta (see X20 user's manual)
FTZÚ 09 ATEX 0083X
UL cULus E115267
Industrial control equipment
DNV Temperature: B (0 - 55°C)
Humidity: B (up to 100%)
Vibration: B (4 g)
EMC: B (bridge and open deck)
KR Yes
CPU / X2X Link power supply input
Input voltage 24 VDC -15% / +20%
Input current Max. 0.7 A
Fuse Integrated, cannot be replaced
Reverse polarity protection Yes
CPU / X2X Link power supply output
Nominal output power 7 W
Parallel connection Yes
Redundant operation Yes
Overload characteristics Short-circuit proof, temporary overload
Input I/O power supply
Input voltage 24 VDC -15% / +20%
Fuse Required line fuse: Max. 10 A, slow-blow
Reverse polarity protection No
Output I/O power supply
Nominal output voltage 24 VDC
Behavior on short circuit Required line fuse
Permissible contact load 10 A
Interface IF1  
Signal RS232
Variant Connection made using 12-pin terminal block X20TB12
Transfer rate Max. 115.2 kbit/s
Interface IF3  
Signal CAN bus
Variant Connection made using 12-pin terminal block X20TB12
Transfer rate Max. 1 Mbit/s
Electrical properties
Electrical isolation
CPU/X2X Link supply isolated from CPU/X2X Link power supply
I/O supply not isolated from I/O power supply
Operating conditions
Mounting orientation  
Horizontal Yes
Vertical Yes
Installation elevation above sea level  
0 to 2000 m No limitation
>2000 m Reduction of ambient temperature by 0.5°C per 100 m
Degree of protection per EN 60529 IP20
Ambient conditions
Horizontal mounting orientation -25 to 60°C
Vertical mounting orientation -25 to 50°C
Derating See section "Derating".
Storage -40 to 85°C
Transport -40 to 85°C
Relative humidity  
Operation 5 to 95%, non-condensing
Storage 5 to 95%, non-condensing
Transport 5 to 95%, non-condensing
Mechanical properties
Note Order 1x terminal block X20TB12 separately.
Order 1x Compact-S CPU base X20BB5x, X20BB6x or X20BB7x separately.
Pitch 12.5+0.2 mm
Write Your Own Review
You're reviewing:B&R BRMTP4-1 NEW Rev. C0

Get in Touch

We would love to hear from you about our entire service. Your comments and suggestions will be highly appreciated. Please complete the form below.


We spend time and help you finding absolute, new, used and refurbished products around the world. Need help please contact one of our team members using our Chat, E-mail or phonenumbers

- [email protected]

- + 31 (0) 50 - 7110348 

- Use our chat in the lower right corner on our screen.

Shipping cost is based on weight. Just add products to your cart and use the Shipping Calculator to see the shipping price. We want you to be 100% satisfied with your purchase. Items can be returned or exchanged within 30 days of delivery.

B&R BRMTP4-1 NEW Rev. C0