产品概览
| 库存情况 | 需按需确认 |
| 分类 | Field power supplies |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
发货与库存
DN4218 何时可以发货？
DN4218 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 DN4218 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 DN4218 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 DN4218 安排当日快递或专车加急配送。
Protection of the wiring via configurable electronic circuit breakers Installation without control cabinet Additional diagnostics by measuring current, voltage and mains quality as well as counting operating hours Energy-efficient generation of extra-low voltage without power loss Output voltage, load currents, output circuit states and trigger cause are communicated via IO-Link Switching the output circuits on and off as well as resetting the circuit breakers is possible via IO-Link
技术规格
Electrical data
| Nominal voltage AC[V] [V] | 230 |
| Nominal voltage DC[V] [V] | 300 |
| Nominal frequency AC[Hz] [Hz] | 50...60 |
| Input voltage DC[V] [V] | 110...300 |
| Input voltage range AC[V] [V] | 100...240; (-15 % / +10 %) |
| Output voltage DC[V] [V] | 24...28 |
| Protection class | I |
| Max. power-on delay time[ms] [ms] | 2000 |
| Max. output current at min. output voltage[A] [A] | 12.5 |
| Max. output current at max. output voltage[A] [A] | 10.7 |
| Output power (permanent)[W] [W] | 300 |
| Output power (peak)[W] [W] | 600 |
| Power factor (nominal voltage 230 V AC / 50 Hz) | 0.97 |
| Number of output circuits | 4 |
| Efficiency (nominal voltage 120 V AC / 60 Hz)[%] [%] | 94.3 |
| Efficiency (nominal voltage 230 V AC / 50 Hz)[%] [%] | 95.7 |
| Mains buffering time (nominal voltage 120 V AC / 60 Hz)[ms] [ms] | 44 |
| Mains buffering time (nominal voltage 230 V AC / 50 Hz)[ms] [ms] | 44 |
| Input current (nominal voltage 120 V AC / 60 Hz)[A] [A] | 3.2 |
| Input current (nominal voltage 230 V AC / 50 Hz)[A] [A] | 1.68 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| Profiles | Common - I&D; Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| SIO mode | yes |
| Min. process cycle time[ms] [ms] | 2 |
| Supported DeviceIDs | default; 1535 |
| default | 1535 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...55 |
| Note on ambient temperature | the derating of the current load indicated in the operating instructions is to be taken into account at the following ambient temperature: 70 °C |
| Storage temperature[°C] [°C] | -40...85 |
| Max. relative air humidity[%] [%] | 95; (relative humidity) |
| Max. height above sea level[m] [m] | 5000 |
| Protection | IP 65; IP 67 |
| Pollution degree | 3 |
Tests / approvals
| EMC | EN 61000-4-2 CD; 8 kV / failure criterion A; EN 61000-4-2 AD; 15 kV / failure criterion A; EN 61000-4-3; 80 Mhz...2.7 GHz / 20 V/m failure criterion A; EN 61000-4-3; 2.7 GHz...6 GHz kV / 10 V/m failure criterion A; EN 61000-4-8; 50 / 60 Hz / 30 A/m failure criterion A; EN 61000-4-4 Burst; 4 kV / failure criterion A; EN 61000-4-5 Surge; 2 kV Lx / Ly / failure criterion A; EN 61000-4-5 Surge; 4 kV L / PE / failure criterion A; EN 61000-4-5 Surge; 1 kV + / - / failure criterion A; EN 61000-4-5 Surge; 1 kV + - / PE / failure criterion A; EN 61000-4-5 Surge; 1 kV + - / PE / failure criterion A; EN 61000-4-5 Surge; 1 kV DC-OK / PE / failure criterion A; EN 61000-4-6; 0.15...80 MHz / 20 V failure criterion A; EN 61000-4-11; 0 V up to 1 cycle / failure criterion A; EN 61000-4-11; 40 % of V / 200 ms failure criterion A; EN 61000-4-11; 70 % of V / 500 ms failure criterion A; EN 61000-4-11; 0 V / 5000 ms failure criterion C; VDE 0160; 1550 V / 1.3 ms failure criterion A; EN 55032; Class B; EN 55032; Class B; EN 55011; Class B; EN 61000-3-2; EN 61000-3-3 |
| EN 61000-4-2 CD | 8 kV / failure criterion A |
| EN 61000-4-2 AD | 15 kV / failure criterion A |
| EN 61000-4-3 | 2.7 GHz...6 GHz kV / 10 V/m failure criterion A |
| EN 61000-4-8 | 50 / 60 Hz / 30 A/m failure criterion A |
| EN 61000-4-4 Burst | 4 kV / failure criterion A |
| EN 61000-4-5 Surge | 1 kV DC-OK / PE / failure criterion A |
| EN 61000-4-6 | 0.15...80 MHz / 20 V failure criterion A |
| EN 61000-4-11 | 0 V / 5000 ms failure criterion C |
| VDE 0160 | 1550 V / 1.3 ms failure criterion A |
| EN 55032 | Class B |
| EN 55011 | Class B |
| Continuous shock resistance | IEC 60068-2-27; 30 g 6 ms / 20 g 11 ms |
| IEC 60068-2-27 | 30 g 6 ms / 20 g 11 ms |
| Vibration resistance | IEC 600068-2-6; 2...17.8 Hz ± 1.6mm / 17.8...500 Hz 2 g |
| IEC 600068-2-6 | 2...17.8 Hz ± 1.6mm / 17.8...500 Hz 2 g |
| MTTF[years] [years] | 31 |
Mechanical data
| Weight[g] [g] | 1524.5 |
| Housing | rectangular |
| Type of mounting | backplane mounting |
| Dimensions[mm] [mm] | 199.7 x 178 x 59.5 |
| Materials | housing: aluminium alloy; housing cap: PC; screws: steel bronzed |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection - IO-Link
| Connector | 1 x M12; coding: A; Locking: brass |
Electrical connection - Output voltage
| Connector | 2 x M12; coding: A; Locking: brass |
Electrical connection - power supply
| Connector | 1 x 7/8"; Locking: brass |
12个月保修适用于所有全新库存
3个月保修适用于二手及翻新零部件
30天退货未使用零部件退货免收上架费
全球发货全球快速可追踪配送
