产品概览
| 库存情况 | 需按需确认 |
| 分类 | reACTION Technology modules |
| 生命周期状态 | active |
| 保修 | 12个月（全新）· 3个月（二手/翻新） |
发货与库存
X20RT8001 何时可以发货？
X20RT8001 属于按需采购产品——请申请报价，我们会为这一具体单品确认准确的库存情况及发货时间。
可以亲自到店提取 X20RT8001 吗？
可以在我们位于荷兰格罗宁根的仓库安排自提——请在下单前联系我们，确认库存情况并预约提货时间。
是否提供快递服务？
可以——在为 X20RT8001 申请报价时告诉我们，我们会在回复中附上快递发货选项。
我们的工厂停产了，急需这个零部件——你们能帮忙吗？
如遇紧急故障，请直接致电 +31 (0)50-7110348 或发邮件至 sales@partnerplc.com 联系我们——我们可根据库存情况及目的地，为 X20RT8001 安排当日快递或专车加急配送。
reACTION technology module4 high-speed digital inputs4 high-speed digital channels, configurable as inputs or outputs1 ABR incremental encoder input 24 VPulse width modulation24 VDC and GND for encoder supplySupports blackout mode This reACTION technology module has four high-speed digital inputs and four high-speed digital mixed channels. All connections are designed for 1-wire connections. All inputs are designed for sink connections, the outputs for push-pull connections.Ultrafast reACTION Technology makes it possible to control the integrated I/O channels with response times down to 1 μs. All of the commands that can be used for reACTION programs are provided as function blocks in special libraries (e.g. AsIORTI). Programming in compliance with IEC 61131-3 requirements takes place in the Function Block Diagram editor in Automation Studio.The module supports blackout mode. In blackout mode, programmable module functionality persists even if the network fails.
技术规格
Specifications
| I/O module | 4 digital input channels, 4 digital channels configurable as inputs or outputs, reACTION Technology |
| B&R ID code | 0xE559 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Outputs | Yes, using LED status indicator and software (output error status) |
| reACTION-capable I/O channels | Yes |
| Scope | Module |
| Function | Programmable |
| Standalone mode | No |
| Bus | 0.01 W |
| Internal I/O | 1 W |
| Additional power dissipation caused by actuators (resistive) [W] | +0.6 |
| Type of signal lines | Shielded cables must be used for all signal lines, cable length: Max. 20 m |
| Type | 64 Mbit flash memory |
| Data retention | 20 years at 55°C |
| Guaranteed erase/write cycles | 100,000 |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cULus E115267 Industrial control equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| Output voltage | 24 VDC -15% / +20% |
| Output current | Module-internal, max. 600 mA |
| Short-circuit proof, overload protection | Yes |
| Quantity | 4 mixed channels, configuration as input or output using software |
| Nominal voltage | 24 VDC |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Typ. 1.3 mA |
| Input circuit | Sink |
| Hardware | <3 µs |
| Software | Default 200 ns, configurable between 200 ns and 5 ms in 10 ns intervals |
| Connection type | 1-wire connections |
| Input resistance | 18.16 kΩ |
| Low | <5 VDC |
| High | >15 VDC |
| Insulation voltage between channel and bus | 500 Veff (Rev. <E0); 856 VAC (Rev. ≥E0) |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 32-bit |
| Input frequency | Max. 333 kHz |
| Evaluation | 4x |
| Variant | Push-Pull |
| Switching voltage | 24 VDC -15% / +20% |
| Nominal output current | 100 mA (Rev. <E0) Configurable: 100/530 mA (Rev. ≥E0) |
| Total nominal current | 400 mA (Rev. <E0); 2.12 A (Rev. ≥E0) |
| Output circuit | Sink or source |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit (see value "Short-circuit peak current") |
| Diagnostic status | Output monitoring with delay <700 ns |
| Leakage current when the output is switched off | Approx. 25 µA |
| RDS(on) | 140 mΩ |
| Residual voltage | <0.4 V at nominal current |
| Max. continuous current | 100 mA (Rev. <E0); 530 mA (Rev. ≥E0) |
| Peak short-circuit current | <10 A |
| Switch-on in the event of overload shutdown or short-circuit shutdown | Approx. 3 ms |
| 0 → 1 | <1 µs |
| 1 → 0 | <1 µs |
| Resistive load | 100 mA: Max. 500 kHz 530 mA: Max. 20 Hz (Rev. ≥E0) |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Horizontal | Yes |
| Vertical | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 60°C |
| Vertical mounting orientation | -25 to 50°C |
| Derating | See section "Derating and hardware configuration". |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM11 separately. |
| Pitch | 12.5+0.2 mm |
