B&R X20cSC2432

Name: B&R X20cSC2432
Brand: B&R
SKU: X20cSC2432

MPN: X20cSC2432 · Marka: B&R

Fiyat için sorun

Teklif İsteyin

12 ay garanti (yeni) · 3 ay (kullanılmış/yenilenmiş)

30 gün iade, kullanılmamış parçalarda stok ücreti yok

Gönderim şekli

Hızlı bilgiler

Uygunluk	Talep üzerine onaylanır
Kategori	Digital mixed modules
Yaşam döngüsü	active
Garanti	12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş)

Gönderim ve uygunluk

X20cSC2432 ne zaman gönderilebilir?

X20cSC2432 talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.

X20cSC2432 ürününü şahsen teslim alabilir miyim?

Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.

Ekspres teslimat mevcut mu?

Evet — X20cSC2432 için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.

Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?

Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak X20cSC2432 için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.

2 safe digital inputs, sink circuit2 pulse outputsSoftware input filter configurable for each channel2 safe relay outputsOutput type "Relay"Relay module for 48 VAC / 24 VDCSwitching current 6 ANormally open contactSingle-channel isolated outputs The module is equipped with 2 safe digital inputs and 2 safe relay outputs. It is designed for a nominal voltage of 24 VDC.The module can be used to read digital signals and for floating control of actuators in safety-related applications up to PL e or SIL 3.The module is equipped with filters that are individually configurable for switch-on and switch-off behavior. The module also provides pulse signals for diagnosing the sensor line.Safety relays are installed in the module. The positively driven feedback contacts are evaluated internally by the module. Safe digital output channels provide protection against automatic restart when network errors occur.This module is designed for X20 12-pin terminal blocks.

Teknik özellikler

Specifications

I/O module	2 safe type A digital inputs, 2 pulse outputs, 24 VDC, 2 relays with 1 normally open contact each, 48 VAC / 6 A, 24 VDC / 6 A
B&R ID code	0xDD5D
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Outputs	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Scope	Module
Function	Module functionality
Standalone mode	No
Max. I/O cycle time	1 ms
Bus	0.26 W
Internal I/O	1.15 W
Relay outputs	1.44
Pulse outputs	0.1
Channel - Bus	Yes
Channel - Channel	Yes
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
Functional safety	EN 50156-1:2004
ATEX	Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X
UL	cULus E115267 Industrial control equipment
HazLoc	cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5
DNV	Temperature: A (0 to 45°C) Humidity: B (up to 100%) Vibration: A (0.7 g) EMC: B (bridge and open deck)
LR	ENV1
KR	Yes
ABS	Yes
BV	EC21B Temperature: 5 - 45°C Vibration: 0.7 g EMC: Bridge and open deck
EN 50155	Yes
EN 61810-3	Yes
Note	Order 1x safety-keyed terminal block separately. Order 1x safety-keyed bus module separately.
Nominal voltage	24 VDC
Voltage range	24 VDC -15% / +20%
Integrated protective function	Reverse polarity protection
Quantity	2
Variant	Push-Pull
Input characteristics per EN 61131-2	Type 1
Hardware	≤150 μs
Software	Configurable between 0 and 500 ms
Input circuit	Sink
Input voltage	24 VDC -15% / +20%
Input current at 24 VDC	Min. 2 mA to max. 4.59 mA
Input resistance	Min. 5.23 kΩ
Error detection time	100 ms
Insulation voltage between channel and bus	Safe disconnection of 300 VAC per EN 50178
Low	<5 VDC
High	>15 VDC
Line length between signal source (pulse output or external signal) and input	Max. 60 m with unshielded line Max. 400 m with shielded line
Nominal output current	50 mA
Diagnostic status	Contact position determined by positively driven contacts
Max. switching frequency	See section "Inrush current behavior for output channels".
0 → 1	<50 ms
1 → 0	<50 ms
Insulation voltage between channel and channel	48 VAC
Contact resistance (without terminal block)	20 mΩ
Contact service life	See "Contact service life".
Short-circuit/Overload protection	External 6 A gL/gG fuse (melting fuse), LS automat C characteristic 1.6 A
Switching voltage range	5 to 24 VDC, 5 to 48 VAC
Coil voltage	24 VDC -15% / +20%
Short-circuit proof	Yes, 1000 A (with specified short-circuit/overload protection)
Max. inrush current	30 A for 20 ms
Overvoltage category per EN 60664-1	II
AC1	48 VAC / 6 A
AC15	48 VAC / 3 A
DC1	24 VDC / 6 A
DC13	24 VDC / 5 A / 0.1 Hz
UL 508	B300 / R300
Output protection	Shutdown of individual channels in the event of overload or short circuit
Peak short-circuit current	25 A for 5 ms
Short-circuit current	1.4 Aeff
Leakage current when the output is switched off	0.1 mA
RDS(on)	20 Ω
Switching voltage	I/O power supply minus voltage drop due to RDS(on)
Total nominal current	100 mA
Horizontal	Yes
Vertical	Yes
Installation elevation above sea level	0 to 2000 m, no limitation
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	See section "Derating".
Starting temperature	Yes, -25°C
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	Up to 100%, condensing
Pitch	25+0.2 mm