Yaskawa MP3300IEC-RBT

Name: Yaskawa MP3300IEC-RBT
Brand: Yaskawa
SKU: MP3300IEC-RBT

제조사 부품번호: MP3300IEC-RBT · 브랜드: Yaskawa

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	MPiec Robotic Series
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

MP3300IEC-RBT은(는) 언제 배송될 수 있나요?

MP3300IEC-RBT은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

MP3300IEC-RBT을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — MP3300IEC-RBT에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 MP3300IEC-RBT에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Yaskawa Articulated Robots and up to 32 Axes The MP3300iec-RBT is the next evolutionary step of the MPiec controller. It offers: Programming and control of Yaskawa delta and articulated robots IEC61131-3 and PLCopen programming standards MECHATROLINK-III motion network 1, 3 or 8 option modules 20 or 32 motion axes

사양

Specifications

MP3300iec-RBT Controller CPU Model Number	PMC-U-MP33320-RBT (Medium Performance), 20-axis, IMI Connector, Robot Controller PMC-U-MP33532-RBT (High Performance), 32-axis, IMI Connector, Robot Controller PMC-U-MP33420-RBT (Medium Performance), 20-axis, RJ45 Connector, Robot Controller PMC-U-MP33632-RBT (High Performance), 32-axis, RJ45 Connector, Robot Controller
Supported Modules	LIO-01, LIO-02, LIO-04, LIO-05, LIO-06, AI-01, AO-01, DO-01
Software	MotionWorks IEC Pro
CPU	800 Mhz or 1.2 GHz
Number of option module slots	1, 3 or 8
User Variable Memory	32 MB
Power Unit	Input Voltage: 24VDC or 100/200VAC Input Current: 1.0 A max (at rated input/output) for 1 slot module 1.5 A max (at rated input/output) for 3 slots module 1.5 A max (at rated input/output) for 8 slots DC module 3.0 A max (at rated input/output) for 8 slots AC module Battery: Battery for memory retention attachable at the bottom of the CPU unit
Motion Network	MECHATROLINK-III: 1 channel, 2 connectors SERVOPACK and I/O for up to 20 slave nodes connectable (SERVOPACK for up to 20 axes) Baud rate: 100 Mbps (MECHATROLINK-III)
Communication Function	Ethernet: 10Base-T or 100Base-TX
Ethernet Protocols	Ethernet/IP and Modbus TCP/IP standard on all units, User specific protocols can be written using Y_DeviceComm firmware library Motomansync to support remote control of Yaskawa delta and articulated robots
Calendar	Seconds, minutes, hour, day, week, month, year, day of week, and timing (battery backup)
Environmental Conditions	Ambient Operating Temperature: 0°C to 60°C (Forced cooling is required if 55°C is exceeded.) Ambient Storage Temperature: -25°C to 85°C Ambient Operating Humidity: 10% to 95% RH (with no condensation) Ambient Storage Humidity: 10% to 95% RH (with no condensation) Pollution Level: Conforms to JIS B 3502 Pollution Degree 2 Corrosive Gas: There must be no combustible or corrosive gas Operating Altitude: 2,000 m above sea level or lower
Mechanical Conditions	Vibration Resistance: Conforming to JIS B 3502: Continuous vibration: 5 to 9 Hz with single amplitude of 1.75 mm 9 to 150 Hz with fixed acceleration of 4.9 m/s2 Intermittent vibration: 5 to 9 Hz with single-amplitude of 3.5 mm 9 to 150 Hz with fixed acceleration of 9.8 m/s2 10 sweeps each in X, Y, and Z directions for both intermittent and continuoust vibration Shock Resistance: Size of shock: Peak acceleration of 147 m/s2 (15 G) Duration: 11 ms 3 times each in the X, Y, and Z directions
Electrical Operating Conditions	Noise Resistance: Conforming to EN 61000-6-2, EN 61000-6-4 and EN 55011 (Group 1, Class A) Power supply noise (FT noise): 2 Kv min., for one minute Radiation noise (FT noise): 1 Kv min., for one minute Ground noise (impulse noise): 1 kV min., for 10 minutes Electrostatic noise (contact discharge method): 6 kV or more, 10 times
Installation Requirements	Ground: Ground to 100 Ω max.
Connectors	M-III: MECHATROLINK (IMI or RJ45), 2 connectors Ethernet: RJ 45: Ethernet RLY OUT: RLY OUT connector USB: DUSB-ARA42-T11A-FA (DDK), type A connector
Indicators	RDY(green), RUN(green), ALM(red), ERR(red), BAT(red), M-ALM(red)
Switches	STOP, E-INIT, INIT, CNFG, LOAD, TEST and MNT
Dimensions	64 mm X 130 mm X 108 mm (W × H × D) with 1 slot module 120 mm X 130 mm X 108 mm (W × H × D) with 3 slots module 240 mm X 130 mm X 108 mm (W x H x D) with 8 slots module