홈 / Wago / Stud terminal block; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; 3 studs, M6; 35,00 mm²; gray

요청 시 제공 가능

Stud terminal block; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; 3 studs, M6; 35,00 mm²; gray

Name: Stud terminal block; lateral marker slots; for DIN-rail 35 x 15 and 35 x 7.5; 3 studs, M6; 35,00 mm²; gray
Brand: Wago
SKU: 885-306

제조사 부품번호: 885-306 · 브랜드: Wago

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Rail-Mount Terminal Blocks
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

885-306은(는) 언제 배송될 수 있나요?

885-306은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

885-306을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — 885-306에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 885-306에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

<h2>High-current terminal block, 885 Series, gray</h2><br/><br/>This through terminal block (item number 885-306) streamlines wire connections, making them both quick and easy. Featuring conductor terminals along with a bolt-type connection, this product outperforms the competition. When connecting wires using a bolt-type connection, conductors with crimped cable lugs are placed on the studs between the safety washer and the current bar. You can then tighten the hex nut to the appropriate torque to ensure the conductors are securely connected. The dimensions are (17.8 x 67 x 55.1) mm (width x height x depth).<br/><br/><h3></h3>

사양

Electrical data - Ratings per IEC/EN

Nominal voltage (III/3)	1000 V
Rated impulse withstand voltage (III / 3)	8 kV
Rated current	125 A
Legend (ratings)	(III / 3) ≙ Overvoltage category III / Pollution degree 3

Electrical data - Ratings per UL

Approvals per	UL 1059
Approvals per	UL 1059 / UL 1059 / UL 1059
Use group	B / C / D

Electrical data - Ratings per CSA

Approvals per	CSA 22.2 No 158
Approvals per	CSA 22.2 No 158 / CSA 22.2 No 158 / CSA 22.2 No 158
Use group	B / C / D

Electrical data - Power Loss

Power loss, per pole (potential)	4.062 W
Rated current I<sub>N</sub> for power loss specification	125 A
Resistance value for specified, current-dependent power loss	0 Ω

Connection data

Clamping units	2
Total number of potentials	1
Number of levels	1

Connection data - Connection 1

Connection technology	Bolt-type connection
Actuation type	Open-end, ring, socket wrench; 10 mm
Connectable conductor materials	Copper
Clamping range	2.5 … 35 mm² / 14 … 2 AWG
Type of cable lugs per DIN 46234	Cable lugs for solder-free connectionsRing type, without insulating sleeve, for copper conductors
Type of cable lugs per DIN 46235	Cable lugs for compression connectionsCover plate type for copper conductors
Thread size	M6

Physical data

Width	17.8 mm / 0.701 inches
Height	67 mm / 2.638 inches
Depth from upper-edge of DIN-rail	48.7 mm / 1.917 inches
Depth	55.1 mm / 2.169 inches

Mechanical data

Tightening torque	3 … 6 Nm
Mounting type	DIN-35 rail
Marking level	Side marking

Material data

Note (material data)	Information on material specifications can be found here
Color	gray
Material group	I
Insulation material (main housing)	Polyamide (PA66)
Flammability class per UL94	V0
Fire load	0.39 MJ
Weight	66.1 g

Environmental requirements

Processing temperature	-35 … +85 °C
Continuous operating temperature	-60 … +105 °C

Environmental requirements - Environmental Testing

Test specification: <br/>Railway applications –<br/>Rolling stock –<br/>Electronic equipment	DIN EN 50155 (VDE 0115-200):2022-06
Test procedure: <br/>Railway applications – <br/>Rolling stock equipment – <br/>Vibration and shock tests	DIN EN 61373 (VDE 0115-0106):2011-04
Spectrum/Mounting location	Service life test, Category 1, Class A/B
Functional test with noise-like oscillations	Test passed according to Section 8 of the standard
Frequency	f1 = 5 Hz to f2 = 150 Hz
Acceleration	0.101g (highest test level used for all axes)
Test duration per axis	10 min.
Test directions	X, Y and Z axes
Monitoring of contact faults and interruptions	Passed
Voltage drop measurement before and after each axis	Passed
Simulated service life test through increased levels of noise-like oscillations	Test passed according to Section 9 of the standard
Frequency	f1 = 5 Hz to f2 = 150 Hz
Acceleration	0.572g (highest test level used for all axes)
Test duration per axis	5 h
Test directions	X, Y and Z axes
Extended testing: Monitoring of contact faults and interruptions	Passed
Extended testing: Voltage drop measurement before and after each axis	Passed
Shock test	Test passed according to Section 10 of the standard
Shock pulse form	Half sine
Acceleration	5g (highest test level used for all axes)
Shock duration	30 ms
Number of shocks (per axis)	3 pos. und 3 neg.
Test directions	X, Y and Z axes
Extended testing: Monitoring of contact faults and interruptions	Passed
Extended testing: Voltage drop measurement before and after each axis	Passed
Vibration and shock stress for rolling stock equipment	Passed