홈 / Wago / Switched-mode power supply; Compact; 1-phase; 12 VDC output voltage; 2.5 A output current; DC-OK LED

요청 시 제공 가능

Switched-mode power supply; Compact; 1-phase; 12 VDC output voltage; 2.5 A output current; DC-OK LED

Name: Switched-mode power supply; Compact; 1-phase; 12 VDC output voltage; 2.5 A output current; DC-OK LED
Brand: Wago
SKU: 787-1201

제조사 부품번호: 787-1201 · 브랜드: Wago

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Power Supplies
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

787-1201은(는) 언제 배송될 수 있나요?

787-1201은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

787-1201을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — 787-1201에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 787-1201에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Features:<ul><li>Stepped profile for installation in standard distribution boards</li><li>Removable front panel and screw mounts for alternative installation in distribution boxes or devices</li><li>Pluggable picoMAX® Connection Technology (tool-free)</li><li>Suitable for both parallel and series operation</li><li>Electrically isolated output voltage (SELV) per EN 60335-1; PELV per EN 60204</li></ul>

사양

Technical data - Input

Phases	1
Nominal input voltage U<sub>i nom</sub>	1 x 100 … 240 VAC; 140 … 340 VDC, 1 x AC 100 … 240 V; DC 140 … 340 V
Input voltage range	1 x 90 … 264 VAC; 125 … 375 VDC
Input voltage derating	-1.5 %/V (< 100 VAC)
Nominal mains frequency range	47 … 63 Hz; 0 Hz
Input current I<sub>i</sub>	≤ 0.6 A (100 VAC; 2.5 ADC)
Inrush current	≤ 30 A (NTC)
Power factor	≥ 0.5
Power factor correction (PFC)	Passive
Mains failure hold-up time	≥ 1000 ms (230 VAC)

Technical data - Output

Nominal output voltage U<sub>o nom</sub>	12 VDC (SELV)
Output voltage range	10 … 14 VDC (adjustable)
Default setting	DC 12 V
Nominal output current I<sub>o nom</sub>	2.5 A
Nominal output power	30 W
Deviation	≤ 1 %
Deviation, dynamic load change 10 … 90 %	≤ 1 %
Residual ripple	≤ 100 mV (peak-to-peak)
Overload behavior	Constant power (in overload range: 1.05 … 1.35 x Io nom); Shutdown and automatic restart in the event of a short circuit or permanent overload

Technical data - Signaling and communication

Signaling	1 x DC OK LED (green)
Operation status indicator	Green LED (Uo)

Technical data - Efficiency/power losses

Power loss P<sub>l</sub>	≤ 0.5 W
Power loss (max.) P<sub>l (max.)</sub>	4.5 W (100 VAC / 12 VDC; 2.5 A)
Efficiency (typ.)	88 % (230 VAC; Nominal load); 87.5 % (110 VAC; Nominal load)

Technical data - Circuit protection

Internal fuse	T 1 A / 250 VAC
Pre-fuse (required)	An external DC fuse is required for the DC input voltage.
Backup fuse (recommended)	Circuit breaker: 6 A, 10 A or higher; Tripping characteristic: B

Safety and protection

Protection class	I
Protection type	IP20; per EN 60529
Resistance to reverse feed	≤ 16 VDC
Overvoltage category	II
Pollution degree	2
Transient suppression (primary)	Varistor
Overvoltage protection; secondary	≤ 20 VDC (in the event of a fault)
Short-circuit-protected	Yes
Open-circuit-proof	Yes
Parallel operation	Yes, for devices of the same type
Series operation	Yes, for 2 devices of the same type
MTBF	> 3,500,000 h (at 25 C; per IEC 61709); > 800,000 h (at 40 C; per IEC 61709)

Connection data

Cable length (max.)

30 m

Connection data - Connection 1

Connection type	Input/output
Connection technology	Push-in CAGE CLAMP®
WAGO connector	picoMAX® 5.0, WAGO 2092 Series
Solid conductor	0.2 … 2.5 mm² / 24 … 12 AWG
Fine-stranded conductor	0.2 … 2.5 mm² / 24 … 12 AWG
Strip length	9 … 10 mm / 0.35 … 0.39 inches

Physical data

Width	54 mm / 2.126 inches
Height	90 mm / 3.543 inches
Depth	56 mm / 2.205 inches
Depth from upper-edge of DIN-rail	52.5 mm / 2.067 inches
Note (dimensions)	Depth: 48 mm (without cover)

Mechanical data

Housing design	DIN-rail-mount enclosure
Mounting type	DIN-35 rail, Screw mount (back/side)

Material data

Flammability class per UL94	V0
Weight	318.5 g

Environmental requirements

Ambient temperature (operation)	-25 … +70 °C
Ambient temperature (storage)	-40 … +85 °C
Relative humidity	20 … 90 % (no condensation permissible)
Derating	−0.8 %/K (> 45 °C)
Climatic category	3K3 (per EN 60721; except for low air pressure)