2-channel analog input; 4 … 20 mA HART
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | I/O Systems |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
750-482은(는) 언제 배송될 수 있나요?
750-482은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
750-482을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — 750-482에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 750-482에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
<p>This analog input module powers field-side signal conditioners and transmits electrically isolated analog signals to the bus system.</p><p>The 24 V field supply is derived from the module's power jumper contacts. The shield directly connects to the DIN-rail. At approximately 25 mA, overload protection switches the measurement input to a high-resistance state. Once normal operating conditions resume, the measurement input will automatically switch back. This module powers 2-wire signal conditioners without dedicated power supply.</p><p>Up to 4 HART dynamic variables (PV, SV, TV, QV) per channel can be mapped in the cyclic process image of the coupler or controller (parameterizable). For HART communication with connected intelligent HART field devices, the HART protocol can be mapped in the cyclic process image of the coupler or controller (parameterizable).</p><p>FDT/DTM device drivers are available for select (programmable) couplers, allowing HART tool routing to the connected HART device.</p>
사양
Technical data
| Number of analog inputs | 2 |
| Total number of channels (module) | 2 |
| Signal type | Current |
| Signal type (current) | 4 … 20 mADC |
| Sensor connection | 2 x (2-wire) |
| Input filter | parameterizable |
| Input filter: parametrizable (channel by channel) | yes |
| Input voltage (max.) | 24 V |
| Input voltage drop | (I meas < 28 mA): non-linear, overload protected U = 0.9 V + 270 Ω x I meas |
| Signal characteristics | Single-ended |
| Diagnostics | Wire break, measurement range overflow |
| Resolution [bit] | 12 Bit |
| Data width | 2 x 2-byte data; 2 x 2-byte data + 2n x 4-byte data (n = number of dynamic variables); 2 x 2-byte data + 6-byte mailbox |
| Overvoltage protection | 30 V, reverse polarity protected |
| Conversion time (typ.) | 10 ms |
| Measurement error (reference temperature) | 25 °C |
| Measurement error, deviation (max.) from the upper-range value | 0.1 % |
| Temperature error (max.) of the upper-range value | 0.01 %/K |
| Line break detection | I meas < 3.10 mA |
| Short-circuit detection | I meas > 22 mA |
| Configuration options | WAGO-I/O-CHECK |
| Supply voltage (system) | 5 VDC; via data contacts |
| Current consumption (5 V system supply) | 65 mA |
| Supply voltage (field) | 24 VDC (-25 … +30 %); via power jumper contacts (power supply via blade contact; transmission (field side supply voltage only) via spring contact) |
| HART devices per channel | 1 device (single-drop, no multi-drop) |
| HART modems per channel | 1 modem (no multiplex) |
| Isolation | 500 V system/field |
| Indicators | LED (A, C) green: Function HART 1, HART 2; LED (B, D) red: Error HART 1, HART 2 |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
Connection data
| Connection technology: I/O | 6 x CAGE CLAMP® |
| Connectable conductor materials | Copper |
| Connection type | Inputs/Outputs |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Strip length | 8 … 9 mm / 0.31 … 0.35 inches |
Physical data
| Width | 12 mm / 0.472 inches |
| Height | 100 mm / 3.937 inches |
| Depth | 69.8 mm / 2.748 inches |
| Depth from upper-edge of DIN-rail | 62.6 mm / 2.465 inches |
Mechanical data
| Mounting type | DIN-35 rail |
| Pluggable connector | fixed |
Material data
| Color | light gray |
| Housing material | Polycarbonate; polyamide 6.6 |
| Fire load | 0.712 MJ |
| Weight | 52.1 g |
| Conformity marking | CE |
Environmental requirements
| Ambient temperature (operation) | 0 … +55 °C |
| Ambient temperature (storage) | -40 … +85 °C |
| Protection type | IP20 |
| Pollution degree | 2 per IEC 61131-2 |
| Operating altitude | 0 … 2000 m / 0 … 6562 ft |
| Mounting position | Horizontal left, horizontal right, horizontal top, horizontal bottom, vertical top and vertical bottom |
| Relative humidity (without condensation) | 95 % |
| Vibration resistance | Per IEC 60068-2-6 |
| Shock resistance | 15g per IEC 60068-2-27 |
| EMC immunity to interference | per EN 61000-6-2 |
| EMC emission of interference | per EN 61000-6-3 |
| Exposure to pollutants | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H<sub>2</sub>S contaminant concentration at a relative humidity <lt/> 75 % | 10 ppm |
| Permissible SO<sub>2</sub> contaminant concentration at a relative humidity <lt/> 75 % | 25 ppm |
Commercial data
| Product Group | 15 (I/O System) |
| PU (SPU) | 1 pcs |
| Packaging type | box |
| Country of origin | DE |
| GTIN | 4017332319522 |
| Customs tariff number | 85389099990 |
Product Classification
| UNSPSC | 32151705 |
| eCl@ss 10.0 | 27-24-26-01 |
| eCl@ss 9.0 | 27-24-26-01 |
| ETIM 9.0 | EC001596 |
| ETIM 10.0 | EC001596 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 11120-22-2, 1303-86-2, 1317-36-8, 25550-51-0, 7439-92-1 |
| REACH Candidate List Substance | 4-Methyl-1,2-cyclohexanedicarboxylic anhydride, Diboron trioxide, Lead, Lead monoxide, Lead silicate |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Bulgaria) | f7b08ffa-bab6-4961-8ac9-51564b3b4ba8 |
| SCIP notification number (Czech Republic) | 1a67bfdd-3589-4a79-95bc-a4f29c8a1b91 |
