요청 시 제공 가능
Sick MAX48A-32C02FC2000
제조사 부품번호: MAX48A-32C02FC2000 · 브랜드: Sick
가격 문의
견적 요청
12개월 보증(신품) · 3개월(중고/재제조)
30일 반품, 미사용 부품은 재입고 수수료 없음
배송 방식


요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | MAX |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
MAX48A-32C02FC2000은(는) 언제 배송될 수 있나요?
MAX48A-32C02FC2000은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
MAX48A-32C02FC2000을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — MAX48A-32C02FC2000에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 MAX48A-32C02FC2000에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
Linear encoders | MAX | MAX48A-32C02FC2000 | Type: 48 mm 48f7 for IN cylinder mounting – cylinder bore hole 48H8 | Cable connection direction: Axial | Pipe diameter / Damping zone / End cap: 10 mm / 63 mm / Flat | Supply voltage: 24 V DC (8 ... 32 V DC) | Communication interface: CANopen | Connection type: Male connector, M12 type L (24x24 mm), 5-pin | Measuring range: 0 mm ... 2,000 mm
사양
Features
| Items supplied | Accessories not included with delivery, please order separately. |
Safety-related parameters
| MTTFD (mean time to dangerous failure) | 69Â years (ENÂ ISOÂ 13849-1)Â 1) |
Performance
| Type | 48Â mm installation housing â IN cylinder mounting |
| Pressure pipe/End cap | 10 mm / Flat |
| Connection type | Male connector, M12 type L (24x24Â mm), 5-pin |
| Direction of connection | Axial |
| Measured values | Positioning, speed |
| Position (F.S.) | 0 mm ... 2,000 mm 1) |
| Speed | 0 ⦠1,000 mm/s |
| Null zone | 30 mm |
| Damping zone | 63Â mm |
| Fluid temperature | â30 °C ... +95 °C 2) |
| Air humidity | 90Â % (Condensation not permitted) |
| Operating pressure PN | 400Â bar |
| Supply voltage | 24Â VÂ DC (8Â ... 32Â VÂ DC) |
| Switch-on time | <Â 250Â ms |
| Switch-on current | Typ. 5.0 A / 50 µs |
| Measuring frequency (internal) | 1Â ms |
| Transmission rate (cycle time) | CANopen (0Â ... 65,535Â ms), factory setting: 0Â ms (transmission stopped) |
| Hysteresis | ± 0,1 mm |
| Repeatability | Typ. ± 0.2 mm |
| Linearity | Typ. ± 0.25 mm (measuring range 50 to 500 mm) 3) |
| Warming up phase | Typ. ⤠± 0.25 mm (2 min) |
| In the operational status | Typ. ± 0.25 mm (measuring range 50 to 500 mm) 3) |
Interfaces
| Communication interface | CANopen |
| Bus protocol | CANopen CiA DS-301 |
| Device profile | CANopen CiA DS-406 |
| Baud rate | 250Â kbit/s |
| Node ID | 02 |
Electronics
| Connection type | Male connector, M12 type L (24x24Â mm), 5-pin |
| PIN assignment | 1=n.c.; 2=VÂ DC; 3=GND; 4=CAN_H; 5=CAN_L |
| Supply voltage | 24Â VÂ DC (8Â ... 32Â VÂ DC) |
| Residual ripple | < 1% S-S |
| Power consumption | â¤Â 0.75 W |
| Current consumption | â¤Â 30 mA |
| Bus termination (external) | 120 Ω |
| Overvoltage protection during power-up (60 s) | â¤Â 36 V at all poles during power-up (60 s)â¤Â 48 V To GND during power-up (60 s) |
| Reverse polarity protection | â¤Â 36 V (at all poles) (ISO 16750-2) |
| Insulation resistance | Riso â¥Â 10 MΩ, 60 s (ISO 16750-2) |
| Dielectric strength | 500 V DC, 0 V DC (60 s) to housing (RISO â¥Â 1 MΩ) (ISO 16750-2) |
| Short-circuit protection | VS â GND on housing |
Mechanics
| Housing | 48Â mm, 48f7 for IN cylinder mounting â cylinder bore hole 48H8 |
| Ã pressure pipe | 10Â mm |
| à O-ring | 40.87 mm x 3.53 mm |
| à support ring | 42.6 mm x 48 mm x 1.4 mm |
| M12 flange | M12 flange type L: DM 24x24Â mm - hole pattern 17Â mm (ENÂ 61076-2-101) |
| Wire length | 80Â mm |
| Housing | Stainless steel 1.4305Â (AISI 303) |
| Pressure pipe | Stainless steel 1.4404, AISI 316L |
| O-ring | NBR 70 |
| Support ring | PTFE |
| M12 male connector | Glass fiber reinforced polyamide, nickel-/gold-plated brass contacts |
| M12 flange | Nickel-plated brass with O-ring (NBR) |
| Strands | PVC |
Ambient data
| EMC | EU Directive 2014/30Â /Â EU CE marking |
| Generic standards | ENÂ 61000-6-2/61000-6-3 |
| Agricultural and forestry machinery | ENÂ ISOÂ 14982 |
| Transient pulses | ISOÂ 7637-2/ISOÂ 16750-2 |
| ESD (air and contact discharge) | ISOÂ 61000-4-2 / ISOÂ 10605 |
| Sine | 20 g (sine) / 55 ... 2,000 Hz / 3x24 h (IEC 60068-2-6 Fc) |
| Sine over noise | 18 g (r.m.s) / 10 ... 2,000 Hz / 3x36 h (IEC 60068-2-80 Fi) |
| Broadband noise (resonance peaks removed) | 20 g (r.m.s) / 10 ... 2,000 Hz / 3x48 h (IEC 60068-2-64 Fh) |
| Operating pressure PN | 400Â bar |
| Overload pressure Pmax = PN x 1.2 | 480 bar |
| Test pressure Pstat = PN x 1.5 | 600 bar |
| Storage | â20 °C ... +65 °C 1) |
| Operation (electronics) | â40 °C ... +105 °C 2) |
| Maximum air humidity | 90Â % (Condensation not permitted) |
| Housing | IP67 (ENÂ 60529) |
| M12 male connector | IP69K (ISOÂ 20653)Â 3) |
Certificates
| EU declaration of conformity | â |
| UK declaration of conformity | â |
| ACMA declaration of conformity | â |
| Moroccan declaration of conformity | â |
| China RoHS | â |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | â |
Classifications
| ECLASS 5.0 | 27270705 |
| ECLASS 5.1.4 | 27270705 |
| ECLASS 6.0 | 27270705 |
| ECLASS 6.2 | 27270705 |
| ECLASS 7.0 | 27270705 |
| ECLASS 8.0 | 27270705 |
| ECLASS 8.1 | 27270705 |
| ECLASS 9.0 | 27270705 |
| ECLASS 10.0 | 27270705 |
| ECLASS 11.0 | 27270705 |
| ECLASS 12.0 | 27274304 |
| ETIM 5.0 | EC002544 |
| ETIM 6.0 | EC002544 |
| ETIM 7.0 | EC002544 |
| ETIM 8.0 | EC002544 |
| UNSPSC 16.0901 | 41111613 |
12개월 보증모든 신품 재고에 적용
3개월 보증중고 및 재제조 부품에 적용
30일 반품미사용 부품은 재입고 수수료 없음
전 세계 배송빠르고 추적 가능한 전 세계 배송





