Sick DAXTAN-0710RA1F0100E00
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | DAX |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
DAXTAN-0710RA1F0100E00은(는) 언제 배송될 수 있나요?
DAXTAN-0710RA1F0100E00은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
DAXTAN-0710RA1F0100E00을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — DAXTAN-0710RA1F0100E00에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 DAXTAN-0710RA1F0100E00에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
Linear encoders | DAX | DAXTAN-0710RA1F0100E00 | Design: DAX Threaded | Communication interface: Analog / Current | Current output: 4 mA ... 20 mA | Connection type: Male connector, M12, 5-pin | Measurement range: 0 mm ... 710 mm | Supply voltage: 24 V DC (± 20%) | Sequence of signals: Signal 1: rising, signal 2: falling | Unusable range (zero zone/damping zone): 50 mm / 63 mm | Magnet type: Ring magnet | Thread offset: Without thread offset | Thread shape: M18 x 1.5
사양
Safety-related parameters
| MTTFD (mean time to dangerous failure) | 123 years 1) |
Performance
| Linearity | â¤Â 0.02% F.S. (Minimum 60 µm) 1) 2) |
| Repeatability | ⤠± 20 µm |
| Measured values | Positioning |
| Measuring range | 0 mm ... 710 mm |
| Null zone | 50 mm |
| Damping zone | 63Â mm |
| Magnet shape | Ring magnet |
| Configured for number of magnets | 1Â piece |
| Magnet travel speed | Any |
| Measuring frequency (internal) | <Â 2Â ms |
Interfaces
| Communication interface | Analog |
| Communication Interface detail | Current |
| Output signal | 4Â mAÂ ... 20Â mA |
| Number of signals | Two output signals (one output signal + an inverted second output signal) |
| Sequence of signals | Signal 1: rising, signal 2: falling |
| Load resistance | 100 Ω ... 500 Ω |
Electronics
| Connection type | Male connector, M12, 5-pin |
| Pinouts | 1=+24Â VÂ DC; 2=Signal 1; 3=Power ground; 4=Signal 2; 5=Output signal ground (0Â V) |
| Male connector coding | A-coded |
| Supply voltage | 24 V DC (± 20%) |
| Current consumption | 50â¦100 mA |
| Reverse polarity protection | Up to â30Â VÂ DC |
| Residual ripple | â¤Â 0.28 Vpp |
| Dielectric strength | 500Â VÂ DC, 0Â V against housing |
| Over voltage protection | â¤Â 36 V DC |
Mechanics
| Mechanical design | DAX Threaded |
| Thread shape | M18Â x 1.5 |
| Thread offset | Without thread offset |
| Pressure pipe | Stainless steel 1.4404Â (AISI 316L) |
| Housing | Aluminum (anodised), zinc, stainless steel, brass |
| Flange | Stainless steel 1.4305Â (AISI 303) |
Ambient data
| EMC | According to ENÂ 61000-6-2 and ENÂ 61000-6-4 |
| Enclosure rating | IP65 / IP67Â 1) |
| Operating temperature range | â40 °C ... +85 °C |
| Storage temperature range | â40 °C ... +65 °C 2) |
| Permissible relative humidity | 90Â % (Condensation not permitted) |
| Resistance to shocks | 100Â g, 6Â ms (IECÂ 60068-2-27) |
| Resistance to vibration | 15 g / 10â¦2,000 Hz according to IEC 60068-2-6 |
| Nominal operating pressure (PN) | 350Â bar |
| Max. overload pressure during operation (PNÂ x 1.2) | 420Â bar |
| Max. test pressure in cylinder (PNÂ x 1.5) | 530Â bar |
Certificates
| EU declaration of conformity | â |
| UK declaration of conformity | â |
| ACMA declaration of conformity | â |
| Moroccan declaration of conformity | â |
| China RoHS | â |
| cULus certificate | â |
| Information according to Art. 3 of Data Act (Regulation EU 2023/2854) | â |
Classifications
| ECLASS 5.0 | 27270705 |
| ECLASS 5.1.4 | 27270705 |
| ECLASS 6.0 | 27270705 |
| ECLASS 6.2 | 27270705 |
| ECLASS 7.0 | 27270705 |
| ECLASS 8.0 | 27270705 |
| ECLASS 8.1 | 27270705 |
| ECLASS 9.0 | 27270705 |
| ECLASS 10.0 | 27270705 |
| ECLASS 11.0 | 27270705 |
| ECLASS 12.0 | 27274304 |
| ETIM 5.0 | EC002544 |
| ETIM 6.0 | EC002544 |
| ETIM 7.0 | EC002544 |
| ETIM 8.0 | EC002544 |
| UNSPSC 16.0901 | 41111613 |
