Pepperl Fuchs FB9206D3

Power supply. Power supply for 24 V DC, Installation in suitable enclosures in Zone 1, Module can be exchanged under voltage (hot swap), Voltage: 5.4 V DC +/- 5% , <BR>12 V DC + 4/- 2%. Occupied slots: 2. Connection: wired to Ex e terminals via backplane. Maximum safe voltage Um: 60 V DC (SELV/PELV) common mode. Input voltage range: 18 ... 32 V DC (SELV/PELV). Power dissipation: 4.7 W at 100 % load 3.8 W at 50 % load. Power consumption: max. 44 W. Inrush current: 6 A (30 ms) 15 A (20 µs). Voltage: 5.4 V DC +/- 5% , 12 V DC + 4/- 2%. Power: P5V ≤ 5.4 W, P12V ≤ 39 W - P5V. Power supply/Output: basic insulation according to IEC/EN 61010-1, rated insulation voltage 60 Veff. LED indication: LED green: OFF in case of loss of 24V or 12V or 5V. Electromagnetic compatibility: . Directive 2014/30/EU: EN 61326-1:2013 (industrial locations). Galvanic isolation: EN 61010-1:2010. Degree of protection: IEC 60529. Environmental test: EN 60068-2-14. Shock resistance: EN 60068-2-27. Vibration resistance: EN 60068-2-6. Damaging gas: EN 60068-2-42. Relative humidity: EN 60068-2-78. Ambient temperature: -40 ... 60 °C (-40 ... 140 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: 95 % non-condensing. Shock resistance: shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18. Vibration resistance: frequency range 10 ... 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration ± 0.075 mm/1 g; 10 cyclesfrequency range 5 ... 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration ± 1 mm/0.7 g; 90 minutes at each resonance. Damaging gas: designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3. Degree of protection: IP20 (module) , a separate housing is required acc. to the system description. Mass: approx. 970 g. Dimensions: . Height: 107 mm. Width: 57 mm. Depth: 132 mm. EU-type examination certificate: Presafe 19 ATEX 14059U. Marking: II 2G Ex db eb q IIC Gb. Wait time: wait time before removing the device: 7 min For further information see instruction manual.. Directive conformity: . Directive 2014/34/EU: EN IEC 60079-0:2018+AC:2020 EN 60079-1:2014 EN 60079-5:2015 EN 60079-7:2015+A1:2018. ATEX approval: Presafe 19 ATEX 14059U. IECEx approval: . IECEx certificate: IECEx PRE 19.0014U. IECEx marking: Ex db eb q IIC Gb. System information: The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.. Supplementary information: EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.

사양