요청 시 제공 가능
IFM TW2101
제조사 부품번호: TW2101 · 브랜드: IFM
가격 문의
견적 요청
12개월 보증(신품) · 3개월(중고/재제조)
30일 반품, 미사용 부품은 재입고 수수료 없음
배송 방식
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Analogue infrared temperature sensors with display |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
TW2101은(는) 언제 배송될 수 있나요?
TW2101은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
TW2101을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — TW2101에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 TW2101에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
Reliable, non-contact temperature measurement of objects with very high temperatures For applications in the steel and glass industries Intuitive setting of analogue output and switching output via pushbutton Clearly visible display for showing the current temperature Robust housing and scratch-resistant precision lens for use in harsh industrial environments LED pilot light for alignment and control Convenient operation via buttons or parameter setting via IO-Link
사양
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range | 250...1600 °C; 482...2912 °F |
| 250...1600 °C | 482...2912 °F |
| Communication interface | IO-Link |
Application
| Application | tempering temperatures; glass melting; graphite; ceramics; metals; forging; sintering; heat treatment; rolling |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 50 |
| Min. insulation resistance[MΩ] [MΩ] | 100; (50 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 1 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Inputs
| Test input | type 3 (IEC 61131-2) |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design | PNP |
| Number of digital outputs | 1 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 150 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Short-circuit proof | yes |
| Overload protection | yes |
Detection zone
| Wave length range[µm] [µm] | 1...1.7 |
Measuring/setting range
| Measuring range | 250...1600 °C; 482...2912 °F |
| 250...1600 °C | 482...2912 °F |
| Set point SP | 251...1600 °C; 484...2912 °F |
| 251...1600 °C | 484...2912 °F |
| Reset point rP | 250...1599 °C; 482...2910 °F |
| 250...1599 °C | 482...2910 °F |
| Analogue start point | 250...1400 °C; 482...2552 °F |
| 250...1400 °C | 482...2552 °F |
| Analogue end point | 450...1600 °C; 842...2912 °F |
| 450...1600 °C | 842...2912 °F |
| In steps of | 1 °C; 1 °F |
| 1 °C | 1 °F |
| Resolution of switching output[K] [K] | 1 |
| Resolution of analogue output[K] [K] | 0.2; (+ 0.03% of the set measuring span) |
| Resolution of display[K] [K] | 1 |
Accuracy / deviations
| Accuracy[K] [K] | < ± 0,5 %; (of measured value, min. 4 K (degree of emission = 1, T = 23 °C)) |
| Repeatability[K] [K] | 1 |
Response times
| Response time[ms] [ms] | 2; (T > 600 °C) |
Software / programming
| Adjustment of the switch point | programming buttons |
| Parameter setting options | analogue range; normally open / normally closed; switch-on/switch-off delay; Damping; Peakhold; emissivity; simulation function |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 16 |
| Process data binary | 1 |
| Min. process cycle time[ms] [ms] | 3.6 |
| Supported DeviceIDs | default; 717 |
| default | 717 |
Operating conditions
| Ambient temperature[°C] [°C] | 0...65 |
| Storage temperature[°C] [°C] | -20...80 |
| Max. relative air humidity[%] [%] | 95; (non condensing) |
| Protection | IP 65 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-4 |
| Shock resistance | DIN EN 60068-2-27; 30 g (11 ms) |
| DIN EN 60068-2-27 | 30 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 70.6 |
Mechanical data
| Weight[g] [g] | 509 |
| Housing | threaded type |
| Dimensions[mm] [mm] | M30 x 1.5 / L = 239.5 |
| Thread designation | M30 x 1.5 |
| Materials | threaded sleeve: stainless steel (303/1.4305); polyester |
| Lens material | tempered optical glass |
Displays / operating elements
| 3 | pushbuttons |
| Display | Display unit; 2 x LED, yellow; switching status; 1 x LED, yellow; function display; 7-segment LED display, 4-digit; measured values; 7-segment LED display, 4-digit; setting aid; LED pilot light, green |
| Display unit | 2 x LED, yellow |
| switching status | 1 x LED, yellow |
| function display | 7-segment LED display, 4-digit |
| measured values | 7-segment LED display, 4-digit |
| setting aid | LED pilot light, green |
| Operating elements | 3; pushbuttons |
Accessories
| Items supplied | lock nuts: 2 |
Remarks
| Remarks | Use a screened cable to protect infrared temperature sensors from interference.; The screen must be connected to the housing of the sensor via the connector. |
| Pack quantity | 1 pcs. |
12개월 보증모든 신품 재고에 적용
3개월 보증중고 및 재제조 부품에 적용
30일 반품미사용 부품은 재입고 수수료 없음
전 세계 배송빠르고 추적 가능한 전 세계 배송
