요청 시 제공 가능
IFM SU7050
제조사 부품번호: SU7050 · 브랜드: IFM
가격 문의
견적 요청
12개월 보증(신품) · 3개월(중고/재제조)
30일 반품, 미사용 부품은 재입고 수수료 없음
배송 방식
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Ultrasonic flow meters |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
SU7050은(는) 언제 배송될 수 있나요?
SU7050은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
SU7050을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — SU7050에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 SU7050에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
Accurate flow measurement of ultrapure water, water, oils and glycol solutions A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance Can be used for mobile applications User-friendly communication and parameterisation via IO-Link
사양
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 0.5...75 l/min; 0.03...4.5 m³/h; 8...1189 gph; 0.13...19.81 gpm |
| 0.5...75 l/min | 0.03...4.5 m³/h |
| Nominal diameter | DN20 (3/4“) |
| Process connection | threaded connection G 3/4 external thread DN20 |
Application
| Special feature | Gold-plated contacts |
| Application | use in mobile and industrial applications |
| Media | ultra-pure water; water; hydrous media; glycol solutions; oils (of high and low viscosity); coolants |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value; low-viscosity oils with viscosity: 7...40 mm²/s (40 °C); high-viscosity oils with viscosity: 30...68 mm²/s (40 °C) |
| Medium temperature | -40...120 °C; -40...248 °F |
| -40...120 °C | -40...248 °F |
| Min. burst pressure | 150 bar; 15 MPa |
| 150 bar | 15 MPa |
| Pressure rating | 100 bar; 10 MPa |
| 100 bar | 10 MPa |
| Vacuum resistance[mbar] [mbar] | -1000 |
Electrical data
| Operating voltage[V] [V] | 8...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 175 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs / outputs
| Total number of inputs and outputs | 2 |
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Inputs
| Inputs | OUT2; counter reset |
| OUT2 | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link; OUT2; switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| OUT1 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link |
| OUT2 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Analogue voltage output[V] [V] | 0...10 / 0.5...4.5; (scalable) |
| Min. load resistance[Ω] [Ω] | 2000 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | -40...120 °C; -40...248 °F |
| 0.5...75 l/min | 0.03...4.5 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.1 l/min | 0.002 m³/h |
| Note on factory setting | l/min; °C |
| Set point SP | -40...119.4 °C; -40...247 °F |
| 0.9...75 l/min | 0.055...4.5 m³/h |
| Reset point rP | -40...88 °C; -40...190.4 °F |
| 0.5...74.6 l/min | 0.032...4.477 m³/h |
| Analogue start point ASP | -75...60 l/min; -4.5...3.6 m³/h; -1189...951 gph; -19.81...15.85 gpm |
| -75...60 l/min | -4.5...3.6 m³/h |
| Analogue end point AEP | -60...75 l/min; -3.6...4.5 m³/h; -951...1189 gph; -15.78...19.81 gpm |
| -60...75 l/min | -3.6...4.5 m³/h |
| Low flow cut-off LFC | 0.5...3.2 l/min; 0.03...0.195 m³/h; 8...52 gph; 0.13...0.86 gpm |
| 0.5...3.2 l/min | 0.03...0.195 m³/h |
| Frequency end point, FEP | -40...119.4 °C; -40...247 °F |
| 15...75 l/min | 0.903...4.5 m³/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.1...99990000 l; 0.03...26414563.515 gal |
| -40...120 °C | -40...248 °F |
| 0.1 °C | 0.1 °F |
| -40...119.4 °C | -40...247 °F |
| -40...88 °C | -40...190.4 °F |
| Analogue start point | -8...120 °C; 17.6...248 °F |
| -8...120 °C | 17.6...248 °F |
| Analogue end point | -40...88 °C; -40...190.4 °F |
| Frequency start point, FSP | -8...120 °C; 17.6...248 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | glycol solutions (35%); ±(5,0 % MW + 0,5 % MEW); high-viscosity oils with viscosity 46mm2/s (40°C); ±(5,0 % MW + 1,0 % MEW); low-viscosity oils with viscosity 10mm2/s (40°C); ±(5,0 % MW + 1,0 % MEW); water; ± (2,0 % MW + 0,5 % MEW) |
| glycol solutions (35%) | ±(5,0 % MW + 0,5 % MEW) |
| high-viscosity oils with viscosity 46mm2/s (40°C) | ±(5,0 % MW + 1,0 % MEW) |
| low-viscosity oils with viscosity 10mm2/s (40°C) | ±(5,0 % MW + 1,0 % MEW) |
| water | ± (2,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.25; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1837 |
| default | 1837 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...60 |
| Storage temperature[°C] [°C] | -40...80 |
| Protection | IP 67; IP 69K |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 136 |
| UL approval | UL approval no.; I037; File number UL; E174189 |
| UL approval no. | I037 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 494.6 |
| Housing | rectangular |
| Inlet pipe length | 5 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions[mm] [mm] | 113.9 x 48 x 58 |
| Materials | housing: stainless steel (316L/1.4404); connector: PEI, FKM |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre |
| Nominal diameter | DN20 (3/4“) |
| Process connection | threaded connection G 3/4 external thread DN20 |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 1.25 µm |
Displays / operating elements
| Display | operating status; 1 x LED, green |
| operating status | 1 x LED, green |
Accessories
| Items supplied | Flat seal 2, NBR reinforced fibre; package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the accuracy indications are adhered to over the entire application area |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
12개월 보증모든 신품 재고에 적용
3개월 보증중고 및 재제조 부품에 적용
30일 반품미사용 부품은 재입고 수수료 없음
전 세계 배송빠르고 추적 가능한 전 세계 배송
