홈 / IFM / IFM SM6621

요청 시 제공 가능

IFM SM6621

Name: IFM SM6621
Brand: IFM
SKU: SM6621

제조사 부품번호: SM6621 · 브랜드: IFM

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Magnetic-inductive volumetric flow meters
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

SM6621은(는) 언제 배송될 수 있나요?

SM6621은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

SM6621을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — SM6621에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 SM6621에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link

사양

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm
0.05...35 l/min	0.003...2.1 m³/h
Process connection	threaded connection 1/2" NPT internal thread DN15

Application

Special feature	Gold-plated contacts
Media	conductive liquids; water; hydrous media
Note on media	conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C)
Medium temperature[°F] [°F]	-4...194
Pressure rating	16 bar; 1.6 MPa
16 bar	1.6 MPa

Electrical data

Operating voltage[V] [V]	18...30 DC; (to SELV/PELV)
Current consumption[mA] [mA]	< 80
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	5
Measuring principle	magnetic-inductive

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Inputs

counter reset

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]	2
Permanent current rating of switching output DC[mA] [mA]	100
Number of analogue outputs	1
Analogue current output[mA] [mA]	4...20; (scalable)
Max. load[Ω] [Ω]	500
Pulse output	flow rate meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range	0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm
0.05...35 l/min	0.003...2.1 m³/h
Display range	-42...42 l/min; -2.5...2.5 m³/h; -666...666 gph; -11.1...11.1 gpm
-42...42 l/min	-2.5...2.5 m³/h
Resolution	0.02 l/min; 0.002 m³/h; 0.6 gph; 0.01 gpm
0.02 l/min	0.002 m³/h
Set point SP	0.25...35 l/min; 0.015...2.1 m³/h; 4.2...555 gph; 0.07...9.25 gpm
0.25...35 l/min	0.015...2.1 m³/h
Reset point rP	0...34.8 l/min; 0...2.08 m³/h; 1.2...552 gph; 0.02...9.2 gpm
0...34.8 l/min	0...2.08 m³/h
Analogue start point ASP	0...28 l/min; 0...1.7 m³/h; 0...666 gph; 0...7.4 gpm
0...28 l/min	0...1.7 m³/h
Analogue end point AEP	7...35 l/min; 0.42...2.1 m³/h; 111...555 gph; 1.85...9.25 gpm
7...35 l/min	0.42...2.1 m³/h
Low flow cut-off LFC	0.05...1.75 l/min; 0.003...0.1 m³/h; 0.6...27.6 gph; 0.01...0.46 gpm
0.05...1.75 l/min	0.003...0.1 m³/h
Frequency end point, FEP	7...35 l/min; 0.42...2.1 m³/h; 111.6...555 gph; 1.86...9.25 gpm
Frequency at the end point FRP[Hz] [Hz]	1...10000
Pulse length[s] [s]	0.001...2
Pulse value	0.001...99990000 I
Measuring range[°F] [°F]	-4...194
Display range[°F] [°F]	-43.6...233.6
Resolution[°F] [°F]	0.1
Set point SP[°F] [°F]	-3.3...194
Reset point rP[°F] [°F]	-4...193.3
Analogue start point[°F] [°F]	-4...154.4
Analogue end point[°F] [°F]	35.6...194
In steps of[°F] [°F]	0.1

Accuracy / deviations

Accuracy (in the measuring range)	± (0,8 % MW + 0,2 % MEW)
Repeatability	± 0,2 % MEW
Accuracy[K] [K]	± 2,5 (Q > 5 % MEW)

Response times

Start-up delay[s] [s]	0...50
Response time[s] [s]	15; (Q > 10 % MEW, T09)
Damping process value dAP[s] [s]	0...5

Software / programming

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution
Common - I&D	Identification and Diagnosis
Function	Measurement data, standard resolution
SIO mode	yes
Required master port type	A
Process data analogue	3
Process data binary	2
Min. process cycle time[ms] [ms]	8
Supported DeviceIDs	default; 952
default	952

Operating conditions

Ambient temperature[°F] [°F]	-4...140
Storage temperature[°F] [°F]	-13...176
Protection	IP 65; IP 67

Tests / approvals

EMC	DIN EN 60947-5-9
Shock resistance	DIN IEC 68-2-27; 20 g (11 ms)
DIN IEC 68-2-27	20 g (11 ms)
Vibration resistance	DIN IEC 68-2-6:; 5 g (10...2000 Hz)
DIN IEC 68-2-6:	5 g (10...2000 Hz)
MTTF[years] [years]	114
UL approval	UL approval no.; I014; File number UL; E174189
UL approval no.	I014
File number UL	E174189
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]	817.55
Housing	rectangular
Dimensions[mm] [mm]	110 x 48 x 73
Materials	stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30
Materials (wetted parts)	stainless steel (316L/1.4404); PEEK; carbon fibre PEEK; FKM
Process connection	threaded connection 1/2" NPT internal thread DN15