홈 / IFM / IFM CR403S

요청 시 제공 가능

IFM CR403S

Name: IFM CR403S
Brand: IFM
SKU: CR403S

제조사 부품번호: CR403S · 브랜드: IFM

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Controllers for use in cabins and control cabinets
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

CR403S은(는) 언제 배송될 수 있나요?

CR403S은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

CR403S을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — CR403S에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 CR403S에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Freely programmable to IEC 61131-3 with CODESYS 3.5 High-performance CAN interface for various communication tasks Multifunctional inputs and current-controlled outputs ensure maximum adaptability Can be used as a safety controller up to SIL2/PL d when combined with a TÜV-certified software package

사양

Product characteristics

Total number of inputs	12
Total number of outputs	12
Communication interface	CAN
Protection	IP 20

Electrical data

Operating voltage[V] [V]	8...32 DC
Nominal voltage DC[V] [V]	12 / 24
Power consumption[W] [W]	4; (VBB30)
Reverse polarity protection	yes; (VBB30; VBB0, VBB1: in case of supply via the on-board system / battery)

Inputs / outputs

Total number of inputs and outputs

Inputs

Total number of inputs	12
Number of frequency inputs	4
Number of resistor inputs	4
Number of digital inputs	12
Number of analogue inputs	8
Number	4
Plug C2.0	IN0400, IN0401; IN0500, IN0501
Frequency input	function type; phase; software mode; IN_PHASE_CSO; IN_PHASE_CSI; input pair; A: IN0400 + B: IN0401; A: IN0500 + B: IN0501; input range [V]; 0...32; frequency [Hz]; 0,0625...5000; switching level high [V]; > 70 % VBB30; switching level low [V]; < 30 % VBB30; input resistance [Ω]; 10000; accuracy; ± 10 µs
function type	binary, high side
software mode	IN_RESISTOR
input range [V]	0...32
frequency [Hz]	0,0625...5000
switching level high [V]	> 70 % VBB30; (parameterisable)
switching level low [V]	< 30 % VBB30; (parameterisable)
input resistance [Ω]	3200
accuracy	16...3000 Ω: ± 60 Ω
input pair	A: IN0400 + B: IN0401
Analogue input	function type; Voltage, ratiometric; software mode; IN_VOLTAGE_RATIO; input range [V]; 0...1000 ‰ VBB30; input resistance [Ω]; 51000; Resolution; 12 Bit; accuracy; ± 320 mV; input frequency [Hz]; < 330; diagnostic level low; 0 ‰; (parameterisable); diagnostic level high; 1000 ‰; (parameterisable)
Resolution	12 Bit
input frequency [Hz]	< 330
diagnostic level low	0 Ω; (parameterisable)
diagnostic level high	30000 Ω; (parameterisable)
Digital input	function type; binary, low-side; software mode; IN_DIGITAL_CSI; IN_DIGITAL_CSI_NAMUR; input range [V]; 0...32; switching level high [V]; > 70 % VBB30; (parameterisable); switching level low [V]; < 30 % VBB30; (parameterisable); Resolution; 12 Bit; accuracy; ± 320 mV; input frequency [Hz]; < 330; input resistance [Ω]; 3200; diagnostic level low; 0 % VBB30; (parameterisable); diagnostic level high; 400 % VBB30; (parameterisable)
Plug C2.2	IN0000, IN0001; IN0100, IN0101
input range [mA]	0...20
Plug C2.1	IN0200, IN0201; IN0300, IN0301
Resistor input	function type; binary, high side; software mode; IN_RESISTOR; input range [Ω]; 16...30000; measuring current [mA]; < 2,0; Resolution; 12 Bit; accuracy; 16...3000 Ω: ± 60 Ω; 3000...15000 Ω: ± 750 Ω; 15000...30000 Ω: ± 3000 Ω; diagnostic level low; 0 Ω; (parameterisable); diagnostic level high; 30000 Ω; (parameterisable)
input range [Ω]	16...30000
measuring current [mA]	< 2,0

Outputs

Total number of outputs	12
Number of digital outputs	12
Number of PWM outputs	12
Number of PWM-I outputs	2
Number	4
Plug C1.0	VBB0, VBB1
Output group switch	function type; virtual switch; software mode; OUT_DIGITAL_VIRT; voltage range [V]; 6...32; voltage measurement [V]; 0...36; accuracy of the voltage measurement [mV]; ± 360; Current rating [A]; 12; lower limit of current monitoring [mA]; 0; (parameterisable); upper limit of current monitoring [mA]; 12000; (parameterisable)
function type	binary, high side
software mode	OUT_DIGITAL_CSO
voltage range [V]	6...32
voltage measurement [V]	0...36
accuracy of the voltage measurement [mV]	± 360
Current rating [A]	12
lower limit of current monitoring [mA]	0; (parameterisable)
upper limit of current monitoring [mA]	4000; (parameterisable)
Plug C3.0	OUT0002, OUT0003
PWM output	function type; binary, high side; software mode; OUT_PWM_CSO; voltage range [V]; 6...32; switching current [A]; 0,025...1,0; output frequency [Hz]; 20...2000; pulse/pause ratio; 1...1000 ‰; (parameterisable); Resolution; 1 ‰; (20...250 Hz); Min. load resistance [Ω]; 12 V: 12 Ω / 24 V: 24 Ω; protective circuitry; inductive load; thermal protection
switching current [A]	0,025...1,0
output frequency [Hz]	20...2000
pulse/pause ratio	1...1000 ‰; (parameterisable)
Min. load resistance [Ω]	12 V: 12 Ω / 24 V: 24 Ω
protective circuitry	inductive load; thermal protection
current measurement [A]	0...6
accuracy of the current measurement [mA]	± 300
diagnostic functions	wire break; short circuit; current monitoring
PWM-I output	function type; current-controlled; software mode; OUT_CURRENT_CSO; voltage range [V]; 6...32; switching current [A]; 0,025...2,5; output frequency [Hz]; 20...2000; control range [A]; 0,05...2,5; control resolution [mA]; 2; Min. load resistance [Ω]; 12 V: 4,8 Ω / 24 V: 9,6 Ω; protective circuitry; inductive load; thermal protection; current measurement [A]; 0...4; accuracy of the current measurement [mA]; ± 37,5; diagnostic functions; wire break; short circuit; current monitoring; lower limit of current monitoring [mA]; 0; (parameterisable); upper limit of current monitoring [mA]; 2500; (parameterisable)
control range [A]	0,05...2,5
control resolution [mA]	2
Digital output	function type; binary, high side; software mode; OUT_DIGITAL_CSO; voltage range [V]; 6...32; switching current [A]; 0,025...1,0; Min. load resistance [Ω]; 12 V: 12 Ω / 24 V: 24 Ω; protective circuitry; inductive load; thermal protection
diagnostic function	wire break; short circuit; current monitoring
Plug C3.2	OUT0102, OUT0103
Plug C3.1	OUT0004...OUT0007
Resolution	1 ‰; (20...250 Hz)

Software / programming

Parameter setting options	CODESYS 3.5
PLC function to IEC 61131-3	yes
Operating system	real-time operating system

Interfaces

Communication interface	CAN
Number of CAN interfaces	2
Transmission rate	20 kBit/s... 1 MBit/s
Protocol	CANopen; SAE J1939
Interface	CAN Interface 2.0 A/B ISO 11898

Operating conditions

Ambient temperature[°C] [°C]	-40...85
Note on ambient temperature	for further details see section Diagrams and graphs
Storage temperature[°C] [°C]	-40...85
Max. relative air humidity[%] [%]	90; (non condensing)
Max. height above sea level[m] [m]	5000
Protection	IP 20
Pollution degree	2
Chemical media	ISO 16750-5; AA, BA, BD, CC, DB, DC, DD; chemical resistance of the plastics; only one chemical permitted at a time
ISO 16750-5	AA, BA, BD, CC, DB, DC, DD

Tests / approvals

EMC	IEC 61000-6-2; immunity; IEC 61000-6-4; noise emission; ISO 7637-2 pulse 1; severity level 4 / function state C (24 V); ISO 7637-2 pulse 2a; severity level 4 / function state A (24 V); ISO 7637-2 pulse 2b; severity level 4 / function state C (24 V); ISO 7637-2 pulse 3a; severity level 4 / function state A (24 V); ISO 7637-2 pulse 3b; severity level 4 / function state A (24 V); ISO 7637-2 pulse 4; severity level 3 / function state B (12 V); ISO 7637-2 pulse 4; severity level 4 / function state B (24 V); ISO 16750-2 (load dump); function state D (24 V); DIN EN ISO 13766-1; earthworks and construction machines; UN/ECE-R10; noise emission and noise immunity:
IEC 61000-6-2	immunity
IEC 61000-6-4	noise emission
ISO 7637-2 pulse 1	severity level 4 / function state C (24 V)
ISO 7637-2 pulse 2a	severity level 4 / function state A (24 V)
ISO 7637-2 pulse 2b	severity level 4 / function state C (24 V)
ISO 7637-2 pulse 3a	severity level 4 / function state A (24 V)
ISO 7637-2 pulse 3b	severity level 4 / function state A (24 V)
ISO 7637-2 pulse 4	severity level 4 / function state B (24 V)
ISO 16750-2 (load dump)	function state D (24 V)
DIN EN ISO 13766-1	earthworks and construction machines
UN/ECE-R10	noise emission and noise immunity:
Continuous shock resistance	ISO 16750-3; 30 g 6 ms / 24000 shocks
ISO 16750-3	30 g 6 ms / 24000 shocks
Vibration resistance	ISO 16750-3 Test VII; random, mounting place car body; EN 60068-2-6 sine; 10...500 Hz / 10 cycles/axis, sine
ISO 16750-3 Test VII	random, mounting place car body
EN 60068-2-6 sine	10...500 Hz / 10 cycles/axis, sine
Climatic tests	EN 60068-2-30 damp heat: cyclical; 55 °C upper temperature limit / 6 cycles; EN 60068-2-78 damp heat: constant; 40 °C 93 % rH / test period 21 days
EN 60068-2-30 damp heat: cyclical	55 °C upper temperature limit / 6 cycles
EN 60068-2-78 damp heat: constant	40 °C 93 % rH / test period 21 days
Electrical safety	IEC 61010-1; safety requirement: general requirements; IEC 61010-2-201; safety requirement: particular requirements for control equipment
IEC 61010-1	safety requirement: general requirements
IEC 61010-2-201	safety requirement: particular requirements for control equipment
Railway applications	EN 50121-3-2; EN 50155

Mechanical data

Weight[g] [g]	424.4
Housing	rectangular
Type of mounting	screw mounting; (4 x M4)
Dimensions[mm] [mm]	163 x 112 x 25.6
Materials	housing: PPE + PS

Displays / operating elements

Display	no application; LED, green lights; run; LED, green flashing 2 Hz; fault; LED, red flashing 10 Hz; debug run; LED, yellow flashing 2 Hz; debug stop; LED, yellow lights
status (SYS0)	1 LED, multi-colour
status (SYS1)	1 LED, multi-colour
no operating system loaded	LED (SYS0), green flashing 5 Hz
hardware error fatal error+	LED (SYS0), red lights
system error fatal error	LED (SYS0/SYS1), red lights
update	LED (SYS0/SYS1), yellow/green flashing 2 Hz
sleep mode	LED (SYS0), blue lights
no application	LED, green lights
run	LED, green flashing 2 Hz
fault	LED, red flashing 10 Hz
debug run	LED, yellow flashing 2 Hz
debug stop	LED, yellow lights