ISO cylinder-DSBG-...-320- -

Name: ISO cylinder-DSBG-...-320- -
Brand: Festo
SKU: DSBG-...-320- -

제조사 부품번호: DSBG-...-320- - · 브랜드: Festo

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	DSBG
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

DSBG-...-320- -은(는) 언제 배송될 수 있나요?

DSBG-...-320- -은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

DSBG-...-320- -을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — DSBG-...-320- -에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 DSBG-...-320- -에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

ISO 15552 (ISO 6431, VDMA 24562) , Sturdy tie rod design , Self-adjusting pneumatic end-position cushioning saves time during commissioning and adapts optimally to load and speed changes , Comprehensive range of mounting accessories for just about every type of installation , For position sensing , Sustainable thanks to extended life cycle and easier repairs

사양

Specifications

Stroke	1, 2250 mm
Piston diameter	320 mm
Piston rod thread	M48x2, M48, M42x2, M36x2, M36, M30x2, M27x2, M27
Based on standard	ISO 15552
Cushioning	Elastic cushioning rings/plates at both ends, Pneumatic cushioning, adjustable at both ends
Mounting position	optional
Conforms to standard	ISO 15552
Piston-rod end	Male thread, Female thread
Design	Piston, Piston rod, Tie rod, Cylinder barrel
Position detection	Via proximity switch
Symbol	00991217, 00991218, 00991235, 00991237
Variants	Extended male piston rod thread, Piston rod with female thread, Custom thread on the piston rod, Extended piston rod, High corrosion protection, Through piston rod, Heat-resistant seals max. 120°C, Screwed-on swivel mounting position, Spacer bolt on end cap side, Spacer bolt on both sides, Spacer bolt on bearing cap side, Variable spacer bolt length, Shortened male piston rod thread, Piston rod at one end, For proximity switch
Operating pressure	0.6, 10 bar
Mode of operation	Double-acting
CE mark (see declaration of conformity)	To EU Explosion Protection Directive (ATEX)
Explosion protection	Zone 1 (ATEX), Zone 2 (ATEX), Zone 21 (ATEX), Zone 22 (ATEX)
ATEX category gas	II 2G
ATEX category dust	II 2D
Explosion ignition protection type for gas	c T4
Explosion ignition protection type for dust	c T120°C
Explosion ambient temperature	-20°C <= Ta <= +60°C
Operating medium	Compressed air to ISO 8573-1:2010 [7:4:4]
Note on operating and pilot medium	Lubricated operation possible (in which case lubricated operation will always be required)
Corrosion resistance class CRC	2 - Moderate corrosion stress, 3 - high corrosion stress
LABS (PWIS) conformity	VDMA24364-B1/B2-L
Ambient temperature	-20, 120 °C
Impact energy in end positions	6, 12.6 J
Cushioning length	65 mm
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke	46385 N
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke	46385, 48255 N
Note on materials	RoHS-compliant
Material cover	Cast aluminium, coated
Material piston seal	FPM, NBR
Material piston	Cast aluminium
Material piston rod	High-alloy steel, High-alloy stainless steel
Material piston rod wiper	FPM, NBR
Buffer seal material	FPM, TPE-U(PU)
Material of cushioning boss	Wrought aluminium alloy, POM
Material cylinder barrel	Smooth-anodised wrought aluminium alloy
Material nut	Galvanised steel, High-alloy stainless steel
Material bearing	Bronze, Metal polymer compound
Material collar nut	Galvanised steel, High-alloy stainless steel
Material tie rod	High-alloy steel, High-alloy stainless steel
Material spacer bolt	High-alloy steel, High-alloy stainless steel
Material swivel mounting	Galvanised steel