B&R X67DS838B.L12
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | IO-link modules |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
| 무게 | 450 kg |
배송 & 재고
X67DS838B.L12은(는) 언제 배송될 수 있나요?
X67DS838B.L12은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
X67DS838B.L12을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — X67DS838B.L12에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X67DS838B.L12에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
2 IO-Link channels (port class B)6 IO-Link channels (port class A)Port class A: Additional digital input per IO-Link connectionEach IO-Link channel configurable as a digital input or output (SIO mode)24 VDC and GND for sensor/actuator power supplyPort class B: Additional 24 VDC and GND for sensor/actuator power supplyNetTime timestamps: IO-Link data The module is an IO-Link master that allows intelligent sensors and actuators to be connected per the IO-Link standard. The module can operate up to 8 IO-Link devices. All IO-Link channels can also be operated in SIO mode and thus used as digital inputs or outputs. The module is also equipped with 6 additional digital inputs that can be used independently of the configuration of the IO-Link channels. Connectors 7 and 8 are designed as class B IO-Link ports and have an additional galvanically isolated supply voltage.
사양
Specifications
| I/O module | IO-Link master with 8 IO-Link interfaces |
| B&R ID code | 0x2DB9 |
| Status indicators | IO-Link operating state, bus function, module status |
| Module run/error | Yes, using LED status indicator and software |
| IO-Link operating state | Yes, using LED status indicator and software |
| C/Q status | Yes, using LED status indicator and software |
| I/Q status | Yes, using LED status indicator and software |
| X2X Link | M12, B-coded |
| Inputs | M12, A-coded |
| I/O power supply | M8, 4-pin |
| Cable type | 4-pin sensor cable, unshielded |
| Cable length | Max. 20 m |
| Line capacitance | Max. 3 nF |
| Loop resistance | Max. 6 Ω |
| Internal I/O | 0.8 W via connection C 0.5 W via connection D |
| X2X Link power supply | 0.8 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| UL | cTÜV SÜDus No. U10 041745 0020 Per UL 61010-2-201 |
| Nominal voltage | 24 VDC |
| Voltage range | 24 VDC ±25% |
| Integrated protective function | Reverse polarity protection |
| Voltage | 24 VDC ±25% |
| Voltage drop for short-circuit protection at 0.5 A | Max. 0.3 V |
| Power consumption | Max. 72 W per IO-Link class B interface |
| Short-circuit proof | Yes |
| Switch-off delay | Configurable using software |
| Switch-off duration | Configurable using software |
| Voltage drop for short-circuit protection at 1.9 A | Max. 0.3 V |
| Overload protection | Thermal shutdown in the event of overcurrent or short circuit |
| COM1 | 4.8 kbaud |
| COM2 | 38.4 kbaud |
| COM3 | 230.4 kbaud |
| Max. connection capacity | 22 nF (cable + IO-Link device) |
| Max. load | 96 Ω / 250 mA |
| Data format | 1 start bit, 8 data bits, 1 parity bit (even), 1 stop bit |
| Bus level | 24 VDC (active), 0 VDC (resting voltage) |
| Variant | Bipolar, positive and negative switching |
| Peak short-circuit current | <1.3 A |
| Residual voltage | <0.7 VDC at nominal current 0.25 A |
| Switching voltage | I/O power supply minus voltage drop for short-circuit protection and semiconductor switch |
| Voltage drop on semiconductor switch | Max. 0.5 VDC at 0.25 A |
| 0 → 1 | <10 µs |
| 1 → 0 | <10 µs |
| Overcurrent threshold | Configurable using software |
| Nominal output current | 0.25 A |
| Total nominal current with actuator power supply | Max. 4 A |
| Output circuit | Sink or source |
| Switching frequency (resistive load) | Max. 500 Hz |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit, integrated protection for switching inductive loads |
| Hardware | ≤60 µs |
| Input circuit | Sink |
| Input voltage | 24 VDC -15% / +20% |
| Input current at 24 VDC | Typ. 3.6 mA |
| Input resistance | Typ. 6.3 kΩ |
| Low | <5 VDC |
| High | >15 VDC |
| Software | Default 1 ms, configurable between 0 and 25.5 ms |
| Electrical isolation | Bus isolated from IO-Link |
| Any | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP67 |
| Operation | 5 to 95% |
| Storage | 5 to 95% |
| Transport | 5 to 95% |
| Width | 53 mm |
| Height | 155 mm |
| Depth | 42 mm |
| Weight | 450 g |
| M8 | Max. 0.4 Nm |
| M12 | Max. 0.6 Nm |
