B&R X20MM4455
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Motor controllers |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
X20MM4455은(는) 언제 배송될 수 있나요?
X20MM4455은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
X20MM4455을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — X20MM4455에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X20MM4455에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
4x outputs (H bridge) with PWM control and 24 to 48 VDC ±25% supply6 A nominal current (10 A max. current)15 Hz to 50 kHz frequency, 16-bitPWM resolution, 15-bit + sign, minimum 10 nsConfigurable dither12 inputs 5 V, configurable for AB and ABR incremental encoders2x 5 V encoder supply with up to 200 mASource connection of digital inputs for encoder's open collector outputs1-wire connections The PMW motor bridge module is used to control 4 DC motors with a nominal voltage of 24 to 48 VDC ±25% at a nominal current up to 6 A.
사양
Specifications
| I/O module | 4-channel PWM motor bridge, 4 ABR incremental encoders |
| B&R ID code | 0xE8A4 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Output | Yes, using LED status indicator and software |
| Encoder power supply | Yes, using LED status indicator and software |
| I/O power supply | Yes, using software |
| Bus | 0.01 W |
| Internal I/O | 2.4 W |
| 24 VDC | 2 W / channel |
| 48 VDC | 2.1 W / channel |
| 60 VDC | 2.2 W / channel |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 GcIP20, Ta (see X20 user's manual)FTZÚ 09 ATEX 0083X |
| UL | cURus E225616Power conversion equipment |
| Quantity | 4 |
| Output voltage | 5 VDC |
| Output current | Max. 200 mA each |
| Short-circuit proof, overload protection | Yes |
| Nominal voltage | 24 to 48 VDC ±25% |
| Input circuit | Source |
| Hardware | <1 µs |
| Software | - |
| Connection type | 1-wire connections |
| Input resistance | Typ. 2.7 kΩ |
| Additional functions | 4x ABR incremental encoder |
| Low | <2 V |
| High | >3 V |
| Insulation voltage between channel and bus | 500 Veff |
| Encoder inputs | 5 VDC, asymmetrical (single-ended) |
| Counter size | 16-bit |
| Input frequency | Max. 100 kHz |
| Evaluation | 4x |
| Signal form | Square wave pulse |
| Nominal current | 6 A |
| Maximum current | 10 A (2 s) |
| PWM frequency | 15 Hz to 50 kHz |
| Supply | External |
| Fuse | Required line fuse: Max. 32 A slow-blow (see "Overcurrent protection") |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit |
| Variant | H bridge |
| Configurable dither | Amplitude, frequency |
| Period duration resolution | 16-bit, min. 20 μs |
| Phase shift PWM1, 2, 3, 4 | 90° each |
| DC bus capacitance | 680 μF |
| PWM mode | 15 bits plus sign ≥10 ns |
| Current mode | 15 bits plus sign ≥10 ns |
| Electrical isolation | Channel isolated from busChannel not isolated from channel |
| Horizontal | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | 0 to 50°C |
| Vertical mounting orientation | Not permitted |
| Derating | - |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 2x terminal block X20TB12 separately. Order 1x terminal block 0TB3103-7020 separately. |
| Pitch | 87.5+0.2 mm |
