B&R X20MM2436
견적 요청
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | Motor controllers |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
X20MM2436은(는) 언제 배송될 수 있나요?
X20MM2436은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
X20MM2436을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — X20MM2436에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X20MM2436에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
2x outputs (H bridge) with PWM control and 24 to 39 VDC ±25% supply3 A nominal current (3.5 A max current)15 Hz to 50 kHz frequency, 16-bitFrequency mode with 10 to 6553.5 Hz or 1 to 655.35 Hz resolution.PWM resolution, 15-bit + sign, minimum 10 nsConfigurable dither2x 2 inputs 24V, can be configured as ABSink connection1-wire connections The motor bridge module is used to control 2 DC motors with a nominal voltage of 24 to 39 VDC ±25% at a nominal current up to 3 A. The module can be reconfigured and used in current controller mode for controlling inductive loads. The module is also equipped with 4 digital inputs, which can be used as incremental counters. Each motor is controlled with a full-bridge (H-bridge). This enables the motors to be moved in both directions.
사양
Specifications
| I/O module | 2-channel PWM motor bridge, 2 AB incremental encoders |
| B&R ID code | 0x26B5 |
| Status indicators | I/O function per channel, operating state, module status |
| Module run/error | Yes, using LED status indicator and software |
| Output | Yes, using LED status indicator and software |
| I/O power supply | Yes, using software |
| Bus | 0.01 W |
| Internal I/O | - |
| 24 VDC | 2.45 W |
| 48 VDC | 3.15 W |
| Additional power dissipation caused by actuators (resistive) [W] | - |
| CE | Yes |
| UKCA | Yes |
| CRA (Cyber Resilience Act) | In preparation |
| ATEX | Zone 2, II 3G Ex nA nC IIA T5 Gc IP20, Ta (see X20 user's manual) FTZÚ 09 ATEX 0083X |
| UL | cURus E225616 Power conversion equipment |
| HazLoc | cCSAus 244665 Process control equipment for hazardous locations Class I, Division 2, Groups ABCD, T5 |
| DNV | Temperature: B (0 to 55°C) Humidity: B (up to 100%) Vibration: B (4 g) EMC: B (bridge and open deck) |
| CCS | Yes |
| LR | ENV1 |
| KR | Yes |
| ABS | Yes |
| BV | EC33B Temperature: 5 - 55°C Vibration: 4 g EMC: Bridge and open deck |
| KC | Yes |
| Quantity | 2 |
| Nominal voltage | 24 to 39 VDC ±25% |
| Input voltage | 24 VDC (-15% / +20%) |
| Input current at 24 VDC | Approx. 1.3 mA |
| Input circuit | Sink |
| Hardware | <5 µs |
| Software | - |
| Connection type | 1-wire connections |
| Input resistance | Typ. 18 kΩ |
| Additional functions | 2x AB incremental encoder, 1x ABR counter, 2x event counter, 2x period duration/gate measurement |
| Low | <5 VDC |
| High | >15 VDC |
| Insulation voltage between channel and bus | 500 Veff |
| Encoder inputs | 24 V, asymmetrical |
| Counter size | 16-bit |
| Input frequency | Max. 50 kHz |
| Evaluation | 4x |
| Signal form | Square wave pulse |
| Nominal current | 3 A |
| Maximum current | 3.5 A (2 s) |
| PWM frequency | Standard operating mode: 15 Hz to 50 kHz Frequency operating mode: 1 Hz to 6553.5 Hz SuperVibe operating mode: 1 Hz to 50 kHz |
| Supply | External |
| Fuse | Required line fuse: Max. 10 A, slow-blow |
| Output protection | Thermal shutdown in the event of overcurrent or short circuit |
| Variant | H bridge |
| Configurable dither | Amplitude, frequency |
| Period duration resolution (PWM/current operating mode) | 16-bit, min. 20 μs |
| Frequency resolution | Frequency mode Scaling 0.1 Hz <3000 Hz: 0.1 Hz; 3000 to 6553.5 Hz: 0.1 to 0.4 Hz Scaling 0.01 Hz <300 Hz: 0.01 Hz; 300 to 655.35 Hz: 0.01 to 0.04 Hz SuperVibe mode Scaling 1 Hz <10 kHz: 1 Hz; 10 to 50 kHz: 1 to 40 Hz Scaling 0.1 Hz <1000 Hz: 0.1 Hz; 1000 to 6553.5 Hz: 0.1 to 4 Hz |
| Phase shift PWM1 to PWM2 | 180° - if possible (according to operating mode) |
| DC bus capacitance | 100 μF |
| PWM pulse width | 15 bits plus sign ≥10 ns |
| Frequency mode | 15 bits plus sign ≥10 ns |
| Electrical isolation | Channel isolated from bus Channel not isolated from channel |
| Horizontal | Yes |
| 0 to 2000 m | No limitation |
| >2000 m | Reduction of ambient temperature by 0.5°C per 100 m |
| Degree of protection per EN 60529 | IP20 |
| Horizontal mounting orientation | -25 to 50°C |
| Vertical mounting orientation | Not permitted |
| Derating | See section "Derating". |
| Storage | 5 to 95%, non-condensing |
| Transport | 5 to 95%, non-condensing |
| Operation | 5 to 95%, non-condensing |
| Note | Order 1x terminal block X20TB12 separately. Order 1x bus module X20BM31 separately. |
| Pitch | 25+0.2 mm |
