B&R X20AI8039

Name: B&R X20AI8039
Brand: B&R
SKU: X20AI8039

제조사 부품번호: X20AI8039 · 브랜드: B&R

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Analog inputs
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)

배송 & 재고

X20AI8039은(는) 언제 배송될 수 있나요?

X20AI8039은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

X20AI8039을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — X20AI8039에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 X20AI8039에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

±10 V0 to 20 mA / 4 to 20 mA2- or 3-wire Pt100/Pt1000 resistance temperature measurementICTD measurement This module is equipped with 8 configurable inputs. The measurement type of each input can be set individually.

사양

Specifications

I/O module	8 configurable inputs: ±10 V, 0 to 20 mA, 4 to 20 mA, Pt100 / Pt1000 resistance temperature measurement or ICTD measurement
Interfaces	1x X2X Link
B&R ID code	0x32A4
Status indicators	I/O function per channel, operating state, module status
Module run/error	Yes, using LED status indicator and software
Inputs	Yes, using LED status indicator and software
Bus	0.6 W
Internal I/O	1.3 W
Additional power dissipation caused by actuators (resistive) [W]	-
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
Input	ICTD measurement
Input type	Differential input
Voltage	<0.01%
Current	<0.01%
Conversion time	Configurable for each channel
Data type	INT
Input protection	Protection against wiring with supply voltage Exception: Terminal "ICTD x +: 5 V" - see section "Pinout".
Conversion procedure	Sigma-delta
Gain	±0.5%
Offset	±1.2%
DC	>TBD dB
50 Hz	>TBD dB
Common-mode range	TBD
Crosstalk between channels	TBD
Insulation voltage between channel and bus	500 Veff
Hardware	Third-order low-pass filter / Cutoff frequency 10 kHz
Software	Configurable: Sinc 1 to 4 filter or FIR
Digital converter resolution	16-bit
Output format	INT/DINT for temperature measurement UINT for resistance measurement
Sensor type	Configurable per channel
Pt100	INT: -200.0 to 850.0°C DINT: -200.00 to 850.00°C
Pt1000	INT: -200.0 to 850.0°C DINT: -200.00 to 850.00°C
Resistance measurement range	0.01 to 600 Ω / 0.1 to 4800 Ω
Resistance measurement resolution	600 Ω: 0.01 Ω / 4800 Ω: 0.1 Ω
Sensor standard	EN 60751
Linearization method	Internal
Measuring current	250 µA with Pt100 or 600 Ω 100 µA with Pt1000 or 4800 Ω
Reference	5000 Ω ±0.1%
Permissible input signal	Max. ±32 V
Max. gain drift	±0.03%/°C
Max. offset drift	±0.06%/°C
Nonlinearity	<0.01%
Standardized range of values for resistance measurement	600 Ω: 0.01 to 600.00 Ω / 4800 Ω: 0.1 to 4800.0 Ω
Range undershoot	0x8001
Range overshoot	0xFFFF
Open circuit	0xFFFF
General fault	0xFFFF
Open inputs	0xFFFF
Type of output	5 V power supply output for the ICTD sensor
Sensor	ICTD measuring probe
Temperature sensor	1 LSB = 0x0001 = TBD nA
Current measurement range	233 to 373 µA
Temperature sensor normalization	-40.0 to 100.0°C
Common-mode rejection	TBD
Electrical isolation	Channel isolated from bus Channel not isolated from channel
Horizontal	Yes
Vertical	Yes
0 to 2000 m	No limitation
>2000 m	Reduction of ambient temperature by 0.6°C per 100 m
Maximum	4000 m
Degree of protection per EN 60529	IP20
Horizontal mounting orientation	-25 to 60°C
Vertical mounting orientation	-25 to 50°C
Derating	-
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Operation	5 to 95%, non-condensing
Note	Order terminal blocks separately (see section "Order data").
Width (pitch)	27.5+0.2 mm
Height	124 mm
Depth	92 mm