B&R 80VD100PS.C08X-01

Name: B&R 80VD100PS.C08X-01
Brand: B&R
SKU: 80VD100PS.C08X-01

제조사 부품번호: 80VD100PS.C08X-01 · 브랜드: B&R

가격 문의

견적 요청

12개월 보증(신품) · 3개월(중고/재제조)

30일 반품, 미사용 부품은 재입고 수수료 없음

배송 방식

요약 정보

재고 상태	요청 시 확인
카테고리	Inverter modules
라이프사이클	active
보증	12개월(신품) · 3개월(중고/재제조)
무게	700 kg

배송 & 재고

80VD100PS.C08X-01은(는) 언제 배송될 수 있나요?

80VD100PS.C08X-01은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.

80VD100PS.C08X-01을(를) 직접 픽업할 수 있나요?

네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.

특급 배송이 가능한가요?

네 — 80VD100PS.C08X-01에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.

공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?

긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 80VD100PS.C08X-01에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.

Control for 1 servo motor1 SinCos encoder interface2 trigger inputsConnection for motor holding brakeEnable input ACOPOSmicro inverter module, POWERLINK interface, 1x SinCos encoder, 24-64 VDC ±25% power supply, 1 motor connection, 8 A continuous current, 2 digital inputs 24 VDC, sink, can be used as trigger inputs, 1 digital output 24 VDC, 1 A, order terminal blocks separately!

사양

Specifications

Inverter module	Connection for one servo motor with SinCos encoder
B&R ID code	0xE4AC
Status indicators	POWERLINK, operating state, module status, motor information
Module run/error	Yes, using LED status indicator and software
Module temperature / Cooling unit temperature	Yes, using software
Motor status	Yes, using LED status indicator and software
POWERLINK	Yes, using LED status indicator
CPU - 24 VDC power supply	No
CPU - Power supply	Yes
CPU - Motor connection	Yes
CPU - Digital inputs	Yes
CPU - Trigger inputs	Yes
CPU - Enable inputs	Yes
CPU - Encoder	No
CPU - Motor holding brake	No
CPU - POWERLINK	Yes
CE	Yes
UKCA	Yes
CRA (Cyber Resilience Act)	In preparation
UL	cULus E225616 Power conversion equipment
Input voltage	24 VDC ±25%
Voltage monitoring	Yes
CPU	Max. 8 W
Inrush current	Max. 10 A
Idle (no motor powered)	0.5 W
Continuous power consumption	665 W
Switching frequency 5 kHz	[0.24×IM1² + 0.216×IM1 + 0.4] W
Switching frequency 10 kHz	[0.24×IM1² + 0.215×IM1 + 0.8] W
Switching frequency 20 kHz	[0.24×IM1² + 0.214×IM1 + 1.6] W
Switching frequency 40 kHz	[0.24×IM1² + 0.213×IM1 + 3.2] W
Inrush current limiting	Yes, PTC (min. 9 Ω), is bypassed during operation by means of relay contact.
Undervoltage cutoff	<18 VDC
Overvoltage cutoff	>95 VDC
Voltage measurement	Yes
Line protection	Must occur externally
Reverse polarity protection	Yes
Quantity	2
Nominal current	Up to 20 kHz: 8 ARMS / 11.3 APeak At 40 kHz and greater than 45°C: 6.5 ARMS / 9.2 APeak
Max. current/motor	10.6 ARMS / 15 APeak
Max. current/module	15 APeak
Nominal switching frequency	5 kHz
Possible switching frequencies	5 / 10 / 20 / 40 kHz
Max. motor line length	25 m
Max. output frequency	598 Hz
Controller frequency	20 kHz
DC bus capacitance	940 µF
Axis 1	Yes
Axis 2	No
Nominal voltage	24 VDC
Continuous current per connection	1 A
Max. internal resistance	0.3 Ω
Resistive load	100 Hz
Inductive load	See section "Switching inductive loads".
Overload and short-circuit protection	Yes
Open-circuit monitoring	Yes
Undervoltage monitoring	Yes
Response threshold for open-circuit monitoring	<100 mA
Response threshold for undervoltage monitoring	≤23.5 V
Variant	Female RJ45 connector
Electrical isolation	Yes
Type	SinCos encoder
Max. encoder cable length	25 m
Output voltage	5 V ±5%
Load capacity	300 mA
Overload-proof	Yes
Short-circuit proof	Yes
Signal transmission	Differential signals, symmetrical
Signal frequency (-3 dB)	DC up to 300 kHz
Signal frequency (-5 dB)	DC up to 400 kHz
Differential voltage	0.5 to 1.25 VSS
Common-mode voltage	TBD
Terminating resistor	120 Ω
ADC resolution	12-bit
Bit width of position value	14-bit
Input current at nominal voltage	Approx. 7.5 mA
Input circuit	Sink
Low	<5 VDC
High	>15 VDC
Maximum	30 VDC
Insulation voltage between input and bus	500 Veff
Input capacitance	10 nF (Rev. < D0: 100 µF)
Additional functions	Can be used as trigger input
Nominal	24 VDC
Input resistance	Approx. 3.2 kΩ
Rising edge	[Instant recording] Typ. 52 µs
Falling edge	[Instant recording] Typ. 53 µs
Input - ACOPOS	Yes, 500 Veff
Input - Input	Yes, 500 Veff
Modulation compared to ground potential	Max. ±38 V
Horizontal	No
Vertical	Yes
Pollution degree per EN 61800-5-1	2 (non-conductive pollution)
Degree of protection per EN 60529	IP20
Operation	5 to 85%, non-condensing
Storage	5 to 95%, non-condensing
Transport	5 to 95%, non-condensing
Note	Order terminal blocks and cables separately!
Mounting/Cooling	Screw mounting with heat spreader on mounting plate or cold plate
Width	65 mm
Height	134 mm
Depth	95 mm
Weight	700 g
Backplane	Always mount on conductive and earthed backplane.