요청 시 제공 가능
EtherCAT Terminal, 12-channel multi interface, 8 x DI, 1 x CNT, 4 x DO, 2 x PWM, 1 x AI, 1 x AO, 1 x ENC AB, push-in
제조사 부품번호: ED8601-8411 · 브랜드: Beckhoff
가격 문의
견적 요청
12개월 보증(신품) · 3개월(중고/재제조)
30일 반품, 미사용 부품은 재입고 수수료 없음
배송 방식
요약 정보
| 재고 상태 | 요청 시 확인 |
| 카테고리 | EL/EDxxxx | Multi-functional |
| 라이프사이클 | active |
| 보증 | 12개월(신품) · 3개월(중고/재제조) |
배송 & 재고
ED8601-8411은(는) 언제 배송될 수 있나요?
ED8601-8411은(는) 요청 시 소싱됩니다 — 견적을 요청해 주시면 이 특정 제품의 정확한 재고 및 배송 일정을 확인해 드립니다.
ED8601-8411을(를) 직접 픽업할 수 있나요?
네덜란드 흐로닝언 창고에서 직접 픽업이 가능할 수 있습니다 — 주문 전에 연락하셔서 재고와 픽업 시간을 확인해 주세요.
특급 배송이 가능한가요?
네 — ED8601-8411에 대한 견적을 요청하실 때 말씀해 주시면 답변에 특급 배송 옵션을 포함해 드립니다.
공장 가동이 중단되어 긴급히 필요합니다 — 도와주실 수 있나요?
긴급 고장 상황이시라면 +31 (0)50-7110348 또는 sales@partnerplc.com으로 직접 연락해 주세요 — 재고 및 배송지에 따라 ED8601-8411에 대한 당일 택배 또는 전용 긴급 배송을 검토해 드립니다.
The ED8601-8411 EtherCAT Terminal offers a combination of up to twelve signal interfaces and up to nine different signal types with a width of only 12 mm. In addition to the digital inputs and outputs, one analog input and output each are available which
사양
Specifications
| Number of channels | Total | max. 12 |
| Internal communication protocol | EtherCAT |
| Digital input | 4 x digital input, 24 V DC, configurable filter |
| Multi-functional digital input | 4 x digital input, 24 V DC, configurable filter or 2 x digital input, 24 V DC, configurable filter and 2 x digital output, 24 V DC, 0.5 A or 1 x up/down counter, 24 V DC, 100 kHz, threshold output or 1 x encoder 24 V DC HTL, 100 kHz, latch, gate |
| Multi-functional digital output | 2 x digital output, 24 V DC, 0.5 A or 2 x PWM, 24 V DC, 0.5 A |
| Multi-functional analog input | 1 x analog input, voltage ±10 V, 12 bit or 1 x analog input, current, ±20 mA, 12 bit |
| Multi-functional analog output | 1 x analog output, voltage, ±10 V, 12 bit or 1 x analog output, current, 0…20 mA, 12 bit |
| Number of channels | max. 1 |
| Function | incremental encoder interface with Gate/Latch input |
| Connection technology | push-in |
| Signal range | Nominal | 0…20 mA, 4…20 mA |
| Signal range | Technical | 0…21.47 mA |
| Specification | EN 61131-2, type 1/3 |
| “0” signal voltage | -3…+5 V DC |
| “1” signal voltage | 11…30 V DC |
| Input filter | typ. 1 µs, 0.1 ms, 0.5 ms, 1 ms, 3 ms, 10 ms, 20 ms (adjustable) |
| Input current | typ. 3 mA |
| Cable length | Sensor cable | max. 30 m |
| Resolution | max. 16 bit |
| Input frequency | 400 kilo increments/s with 4-fold evaluation, corresponds to 100 kHz |
| Load type | ohmic |
| Output current | max. 0.5 A per channel |
| Output current | ∑ | max. 2 A |
| Short-circuit proof | yes |
| Short circuit current limit | typ. 2 A |
| Output stage | push-pull |
| Switching times | TON | typ. 300 µs |
| Switching times | TOFF | typ. 300 µs |
| Reverse voltage protection | no |
| Breaking energy | Inductive | 150 mJ per channel |
| Pulse duration | TON | typ. > 750 ns |
| Pulse duration | TOFF | typ. > 500 ns |
| Duty factor | 0…100% |
| Output frequency | 20 Hz…25 kHz |
| Resolution | Technical | 12 bits, including sign |
| Resolution | Process data | 655.35… nA |
| Display | Process data | INT16 |
| ADC conversion method | SAR |
| Conversion type | – |
| Conversion time | min. 500 µs per channel |
| Conversion rate | max. 2 ksps per channel |
| Signal range | Full scale value (FSV) | 20 mA |
| Internal resistance/impedance | typ. 33 Ω |
| Ground reference | single-ended |
| Input filter limit frequency | 1 kHz |
| Dielectric strength | ± 30 V |
| Accuracy/uncertainty | Of the FSV | typ. ±0.5% |
| Open-circuit recognition | no |
| Overcurrent protection | typ. 50 mA |
| Load | typ. 350 Ω |
| Sensor types | incremental position detection |
| Signal range | HTL 24 V |
| Resolution | Process data (counter) | 32 bit |
| Microincrements | no |
| Sensor supply | Output voltage | no |
| Quadrature decoder | ja |
| Encoder connection | single-ended connection: A, B |
| Distributed clocks | no |
| Timestamp | no |
| Oversampling | no |
| Electronics | Supply voltage | via E-bus, via power contacts |
| E-bus | Current consumption | typ. 100 mA |
| Power contacts | Input voltage | 24 V DC (-15%/+20%) |
| Power contacts | Current carrying capacity | max. 10 A DC |
| Power contacts | Current consumption | typ. 40 mA + load |
| Power contacts | Output voltage | corresponds to Power contacts | Input voltage |
| Electrical isolation | Channel/channel | no |
| Electrical isolation | Channel/bus | functional, 707 V DC type test |
| Operating temperature | 0…55°C |
| Storage temperature | -25…+85°C |
| Relative humidity | 95%, no condensation |
| Installation position | variable |
| Vibration resistance | conforms to EN 60068-2-6 |
| Shock resistance | conforms to EN 60068-2-27 |
| EMC immunity | conforms to EN 61000-6-2 |
| EMC emission | conforms to EN 61000-6-4 |
| Markings | CE |
| Weight | 60 g |
| Protection rating | IP20 |
| Material | polycarbonate |
| Dimesnions | Width (single) | 15 mm |
| Dimensions | Width (lined up) | 12 mm |
| Dimensions | Height | 100 mm |
| Dimensions | Depth | 65 mm |
| Installation | Terminal/back wall | DIN rail, 35 mm (EN 60715) |
| Installation | Terminal/terminal | double slot and key connection |
| Plug-in wiring level | no |
| Connection cross-section | Solid wire | 0.08…1.5 mm² |
| Connection cross-section | Stranded wire | 0.25…1.5 mm² |
| Connection cross-section | With ferrule | 0.14…0.75 mm² |
| Connection cross-section AWG | Solid wire | AWG28…16 |
| Connection cross-section AWG | Stranded wire | AWG22…16 |
| Connection cross-section AWG | With ferrule | AWG26…19 |
| Stripping length | 8…9 mm |
| Power contact | "+" (left) | yes |
| Power contact | "+" (rechts) | yes |
| Power contact | "-" (left) | yes |
| Power contact | "-" (right) | yes |
| Power contact | "⏚" (left) | no |
| Power contact | "⏚" (right) | no |
| Insertion lock for power contact “⏚” | yes |
12개월 보증모든 신품 재고에 적용
3개월 보증중고 및 재제조 부품에 적용
30일 반품미사용 부품은 재입고 수수료 없음
전 세계 배송빠르고 추적 가능한 전 세계 배송
