Wago 부품

End and intermediate plate; 2 mm thick; orange

DALI-Sensor; PD11-BMS-FLAT

Roller; for Smart Printer; for marking strips, device and equipment markers, conductor and cable markers

End and intermediate plate; 1 mm thick; orange

L-type test plug module; modular; with spring-loaded contact pin; Center module; 1,50 mm²; gray

Flat cable; Dca; 2 x 1.5 mm²; halogen-free; 2 buses; 50 V; 1,50 mm²; light gray

End and intermediate plate; 1 mm thick; orange

End and intermediate plate; 4 mm thick; gray

End and intermediate plate; 2.5 mm thick; orange

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 5 mm; 2-pole; gray

Jumper; from 1 to 3; insulated; light gray

Flat cable end cover; 5-pole; for flat cable 5 x 2.5/4 mm²; Plastic; transparent

End and intermediate plate; 3 mm thick; orange

Jumper; 6-way; insulated; light gray

Basic relay; Nominal input voltage: 60 VDC; 1 changeover contact; Limiting continuous current: 6 A; Module width: 5 mm; Module height: 15 mm

Cable fitting; M40 x 1.5 with O-ring; Plastic; black

Ferrule; Sleeve for 10 mm² / AWG 8; uninsulated; electro-tin plated

Fixing clamp for screw mounting; plastic; gray

Group marker carrier; gray

Ferrule; Sleeve for 4 mm² / AWG 12; insulated; electro-tin plated; electrolytic copper; gastight crimped; acc. to DIN 46228, Part 4/09.90; gray

WMB marking card; as card; MARKED; 1 / 2 (50 each); stretchable 5 - 5.2 mm; Horizontal marking; snap-on type; white

Empty component plug housing; 10 mm wide; Type 4; 2-pole; gray

Jumper; for conductor entry; 2-way; gray

WMB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Horizontal marking; snap-on type; white