お問い合わせにより対応可能
Power signal conditioner; Current and voltage input signal; Current and voltage output signal; Digital output; Configuration via software; Supply voltage: 24 VDC; 6 mm module width
型番（MPN）: 857-569 · ブランド: Wago
価格はお問い合わせください
見積もりを依頼する
12か月保証（新品）・3か月保証（中古・整備済み）
30日間返品可能、未使用品は返品手数料無料
配送業者
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | Signal Conditioners and Isolation Amplifiers |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
857-569はいつ発送できますか？
857-569はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
857-569を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — 857-569の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — 857-569について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
Short description:
WAGO's power measurement module measures both AC/DC voltages and currents, converting the input signal into a standard analog signal at the output.
Measured value processing can be switched between RMS value or arithmetic mean value and between effective, apparent or reactive power, and phase angle.
Features:
Two isolated measurement inputs for both AC/DC voltages and currents
RMS measurement or arithmetic mean value
A digital signal output reacts to configured measurement range limits (on/off switching delay and threshold value switch function can be configured with up to two threshold values).
Switchable filter function
3-way electrical isolation with 2.5 kV test voltage
仕様
Technical data - Configuration
| Configuration options | DIP switch, WAGO Interface Configuration Software |
Technical data - Input
| Input signal type | Voltage, Current |
| Input signal (voltage) | 300 V AC/DC (IN 1) |
| Input signal (current) | 0 … 5 A AC/DC (IN 2) |
| Measurement frequency | 15 … 70 Hz (AC) |
| Frequency range | 15 … 70 Hz (AC) |
| Input resistance (current input) | ≤ 10 mΩ |
| Input resistance (voltage input) | ≥ 300 kΩ |
| Input current (max.) | 10 A AC/DC (IN 2; permanent) |
| Input voltage (max.) | 600 V (IN 1; permanent) |
| Response threshold | 300 mV (IN 1); 10 mA (IN 2) |
| Resolution (voltage) | 30 mV (IN 1) |
| Resolution (current) | 1 mA (IN 2) |
Technical data - Output (analog)
| Output signal type | Current, Voltage |
| Output signal (voltage) | 0 … 5 V, 1 … 5 V, 0 … 10 V, 2 … 10 V (invertible, also bipolar) |
| Output signal (current) | 0 … 10 mA, 2 … 10 mA, 0 … 20 mA, 4 … 20 mA (invertable, also bipolar) |
| Load impedance (voltage output) | ≥ 1 kΩ |
| Load impedance (current output) | ≤ 600 Ω |
Technical data - Output (digital)
| Switching voltage (DO) max. | Supply voltage applied |
| Continuous current (DO) max. | 100 mA (no internal restriction) |
| Number of switching thresholds (DO) | 1 or 2 (adjustable) |
| Configurable rise/fall delay time (DO) | 0 … 60 s (via software) |
Technical data - Signal processing
| Measurement method | RMS measurement; Arithmetic mean value |
| Limit frequency | 2 kHz |
| Software filter (adjustable) | Moving average value (filter level: 30) |
| Step response (typ.) | 100 ms |
Technical data - Measurement error
| Transmission error (max.) | ≤ 0.5 % (of the full scale value) |
| Temperature coefficient | ≤ 0.01 %/K |
Technical data - Power supply
| Power supply type | 24 VDC |
| Nominal supply voltage U<sub>S</sub> | 24 VDC |
| Supply voltage range | ±30 % |
| Current consumption at nominal supply voltage | ≤ 46 mA (+ IDO) |
Safety and protection
| Rated voltage | 300 V; 150 V (UL) |
| Measurement category per EN/UL 61010-2-030 | CAT II (input) |
| Note on insulation parameters | Danger: Configuration via the service interface must only be performed with a voltage-free measurement input! The digital output (DO) operates at the supply potential. |
| Protection type | IP20 |
Safety and protection - Test voltage
| Test voltage (input/analog output/supply/service interface) | 2.5 kVAC; 50 … 60 Hz; 1 min |
Safety and protection - Insulation coordination (UL)
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply/service interface) | Reinforced insulation (safe isolation) |
Safety and protection - Insulation coordination
| Overvoltage category | II |
| Pollution degree | 2 |
| Insulation type (input/analog output/supply/service interface) | Double insulation (impedance and basic insulation);Requirement: The GND 1 input must not become hazardous when active and the measurement is performed as a low-side measurement! |
Connection data
| Connection technology | Push-in CAGE CLAMP® |
| Solid conductor | 0.08 … 2.5 mm² / 28 … 14 AWG |
| Fine-stranded conductor | 0.34 … 2.5 mm² / 22 … 14 AWG |
| Strip length | 9 … 10 mm / 0.35 … 0.39 inches |
Physical data
| Width | 6 mm / 0.236 inches |
| Height | 94 mm / 3.701 inches |
| Depth from upper-edge of DIN-rail | 97.8 mm / 3.85 inches |
Mechanical data
| Mounting type | DIN-35 rail |
Material data
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Fire load | 0.013 MJ |
| Weight | 34 g |
Environmental requirements
| Ambient temperature (operation) | -40 … +70 °C (at nominal current) |
| Ambient temperature (storage) | -40 … +85 °C |
| Temperature range of connection cable | ≥ (Tambient + 10 K) |
| Temperature range of the connection cable (UL) | 80 °C |
| Relative humidity | 5 … 95 % (no condensation permissible) |
| Operating altitude (max.) | 2000 m |
Standards and specifications
| Conformity marking | CE |
| EMC immunity to interference | EN 61000-6-2; EN 61326-2-3; EN 50121-3-2 |
| EMC emission of interference | EN 61000-6-3; EN 61326-2-3; EN 50121-3-2 |
| Standards/specifications | EN 61010-1, EN 61373, EN 50121-3-2 |
Commercial data
| PU (SPU) | 1 pcs |
| Packaging type | bag |
| Country of origin | DE |
| GTIN | 4055143501026 |
| Customs tariff number | 85437090300 |
Product Classification
| UNSPSC | 41113630 |
| eCl@ss 10.0 | 27-21-01-24 |
| eCl@ss 9.0 | 27-21-01-24 |
| ETIM 9.0 | EC002476 |
| ETIM 10.0 | EC002476 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| CAS-No. | 11120-22-2, 1303-86-2, 1317-36-8, 7439-92-1, 75980-60-8 |
| REACH Candidate List Substance | Diboron trioxide, Lead, Lead monoxide, Lead silicate, Phosphine oxide, diphenyl(2,4,6-trimethylbenzoyl)- |
| RoHS Compliance Status | Compliant,With Exemption |
| RoHS Exemption | 6(c), 7(a), 7(c)-I, 7(c)-II |
| SCIP notification number (Austria) | 0334ed74-ca93-4ebb-9687-7fb41083b84c |
| SCIP notification number (Belgium) | 52197f75-6ee4-4832-ba31-18d590a3cfc1 |
| SCIP notification number (Bulgaria) | 33ab3002-8078-4165-92e1-c0183f8b20da |
| SCIP notification number (Czech Republic) | aad42d90-b712-478c-bff1-e9e87a65592d |
| SCIP notification number (Denmark) | f6f5a36a-e242-49e2-9aa3-037e7aa732c4 |
| SCIP notification number (Finland) | 90b8099b-7e3d-487a-9368-3d7c1cccf173 |
| SCIP notification number (France) | f9b95d5c-28d6-45d8-9a80-bbdd9b41a7b6 |
| SCIP notification number (Germany) | 98311d18-05a3-429a-8648-c06160b9eb34 |
| SCIP notification number (Hungary) | 41ffffef-697d-497d-b974-99c265608896 |
| SCIP notification number (Italy) | cb3a3c8d-ca04-4627-bd73-565ab7b2f02a |
| SCIP notification number (Netherlands) | 49dd2d9e-c918-4cf5-80c7-bb23a3ba8864 |
| SCIP notification number (Poland) | c4a7f19d-f681-49eb-a9e6-0e311ace9798 |
| SCIP notification number (Romania) | 5bf080aa-49b1-4698-b403-928127389211 |
| SCIP notification number (Sweden) | b5c152bb-1fdd-4c12-80a1-d0beccd5021e |
12か月保証すべての新品在庫が対象
3か月保証中古・整備済み部品が対象
30日間返品可能未使用品は返品手数料無料
世界中に配送追跡可能な迅速な配送を全世界へ
