お問い合わせにより対応可能
IFM TCC911
型番（MPN）: TCC911 · ブランド: IFM
価格はお問い合わせください
見積もりを依頼する
12か月保証（新品）・3か月保証（中古・整備済み）
30日間返品可能、未使用品は返品手数料無料
配送業者
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | Self-monitoring transmitters for the food industry |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
TCC911はいつ発送できますか？
TCC911はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
TCC911を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — TCC911の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — TCC911について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
Immediate notification of deviations in accuracy Improved quality assurance in between calibration intervals Robust design for permanently precise measurements even in demanding environments Transparent sensor monitoring thanks to logging of the diagnostic values Simulation function simplifies installation Precise analogue output and user-friendly communication via IO-Link
仕様
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Measuring range | -25...160 °C; -13...320 °F |
| -25...160 °C | -13...320 °F |
| Communication interface | IO-Link |
| Process connection | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Installation length EL[mm] [mm] | 50 |
Application
| Special feature | Gold-plated contacts |
| Measuring element | 1 x Pt 1000 |
| Reference element | 1 x NTC |
| Media | liquids and gases |
| Pressure rating | 160 bar; 16 MPa |
| 160 bar | 16 MPa |
| Minimum installation depth[mm] [mm] | 15 |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; ("supply class 2" to cULus) |
| Current consumption[mA] [mA] | 10; (24 V) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 6 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | analogue signal; IO-Link; (calibration check status) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1 |
| Output function | normally closed; (diagnostic signal) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Diagnostic output | calibration check status and error diagnostics |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | (Ub - 15 V) x 50 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Probe length L[mm] [mm] | 50 |
| Measuring range | -25...160 °C; -13...320 °F |
| -25...160 °C | -13...320 °F |
| Note on measuring range | scalable |
| Factory setting | -10...150 °C / 14...302 °F |
| Calibration check limit[K] [K] | 0.5...3 |
| In steps of[K] [K] | 0.05 |
| Resolution of analogue output[K] [K] | 0.05 |
Accuracy / deviations
| Precision analogue output[K] [K] | ± 0,2 |
| Precision IO-Link[K] [K] | ± 0,2 |
| Temperature coefficient analogue output[% of the span / 10 K] [% of the span / 10 K] | < ± 0,02; (in case of deviation from the reference condition 25 ± 5 °C) |
| Temperature coefficient IO-Link[% of the span / 10 K] [% of the span / 10 K] | < ± 0,01; (in case of deviation from the reference condition 25 ± 5 °C) |
Response times
| Dynamic response T05 / T09[s] [s] | 1,5 / 4 |
Software / programming
| Parameter setting options | Display unit; scaling of the analogue output; calibration check limit; switching logic diagnostic output; simulation mode |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, standard resolution |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 1 |
| Min. process cycle time[ms] [ms] | 4.4 |
| IO-Link resolution temperature[K] [K] | 0.01 |
| Supported DeviceIDs | default; 1129 |
| default | 1129 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...70 |
| Note on ambient temperature | max. internal device temperature: 125 °C |
| Storage temperature[°C] [°C] | -40...100 |
| Protection | IP 68; IP 69K |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 68000-2-27; 50 g (11 ms) |
| DIN EN 68000-2-27 | 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 35 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 35 g (10...2000 Hz) |
| MTTF[years] [years] | 329 |
| Note on approval | factory certificate available as download at www.factory-certificate.ifm |
| UL approval | UL approval no.; K021; File number UL; E217884 |
| UL approval no. | K021 |
| File number UL | E217884 |
Mechanical data
| Weight[g] [g] | 408.2 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 50 / L = 114.8 |
| Materials | stainless steel (316L/1.4404); PEI; FKM; PFA |
| Materials (wetted parts) | stainless steel (316L/1.4404); PEEK |
| Process connection | Clamp DN50 (2") DIN 32676 (ISO 2852) |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.8 µm |
| Probe diameter[mm] [mm] | 6 |
| Installation length EL[mm] [mm] | 50 |
Remarks
| Remarks | MS = set measuring span; operating voltage "supply class 2" according to cULus |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
12か月保証すべての新品在庫が対象
3か月保証中古・整備済み部品が対象
30日間返品可能未使用品は返品手数料無料
世界中に配送追跡可能な迅速な配送を全世界へ
