お問い合わせにより対応可能
IFM SUH320
型番（MPN）: SUH320 · ブランド: IFM
価格はお問い合わせください
見積もりを依頼する
12か月保証（新品）・3か月保証（中古・整備済み）
30日間返品可能、未使用品は返品手数料無料
配送業者
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | Ultrasonic flow meters |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
SUH320はいつ発送できますか？
SUH320はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
SUH320を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — SUH320の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — SUH320について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality User-friendly communication and parameterisation via IO-Link
仕様
Product characteristics
| Measuring range | 3...375 l/min; 0.18...22.5 m³/h; 48...5944 gph; 0.8...99.06 gpm |
| 3...375 l/min | 0.18...22.5 m³/h |
| Nominal diameter | DN40 (1 1/2“) |
| Process connection | Clamp DN40 DIN 32676 series A |
Application
| Special feature | Gold-plated contacts |
| Application | food and beverage industry |
| Media | ultra-pure water; water; hydrous media |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value |
| Medium temperature[°C] [°C] | -40...130; (< 1 h: 150) |
| Min. burst pressure | 75 bar; 7.5 MPa |
| 75 bar | 7.5 MPa |
| Pressure rating | 25 bar; 2.5 MPa |
| 25 bar | 2.5 MPa |
| Note on pressure rating | take into account the pressure resistance of the bracket and the seal used for clamp connection |
| Vacuum resistance[mbar] [mbar] | -1000 |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs
| Inputs | OUT2; counter reset |
| OUT2 | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link; OUT2; switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| OUT1 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link |
| OUT2 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| Electrical design | PNP/NPN |
| Output function | normally open / normally closed; (parameterisable) |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Number of digital outputs | 2 |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | -40...130 °C; -40...266 °F |
| 3...375 l/min | 0.18...22.5 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.1 l/min | 0.001 m³/h |
| Note on factory setting | l/min, °C |
| Set point SP | -39.4...130 °C; -38.9...266 °F |
| 5.1...375 l/min | 0.304...22.5 m³/h |
| Reset point rP | -40...129.4 °C; -40...264.9 °F |
| 3.1...373.1 l/min | 0.187...22.383 m³/h |
| Analogue start point ASP | -375...300 l/min; -22.5...18 m³/h; -5944...4755 gph; -99.06...79.25 gpm |
| -375...300 l/min | -22.5...18 m³/h |
| Analogue end point AEP | -300...375 l/min; -18...22.5 m³/h; -4755...5944 gph; -79.25...99.06 gpm |
| -300...375 l/min | -18...22.5 m³/h |
| Low flow cut-off LFC | 3...18.8 l/min; 0.18...1.125 m³/h; 48...297 gph; 0.79...4.95 gpm |
| 3...18.8 l/min | 0.18...1.125 m³/h |
| Frequency end point, FEP | -6...130 °C; 21.2...266 °F |
| 75.2...375 l/min | 4.514...22.5 m³/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.1...99990000 I; 0.03…26414563.515 gal |
| -40...130 °C | -40...266 °F |
| 0.1 °C | 0.1 °F |
| -39.4...130 °C | -38.9...266 °F |
| -40...129.4 °C | -40...264.9 °F |
| Analogue start point | -40...96 °C; -40...204.8 °F |
| -40...96 °C | -40...204.8 °F |
| Analogue end point | -6...130 °C; 21.2...266 °F |
| -6...130 °C | 21.2...266 °F |
| Frequency start point, FSP | -40...96 °C; -40...204.8 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | water; ± (1,0 % MW + 0,5 % MEW) |
| water | ± (1,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.3; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | Common - I&D; Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1910 |
| default | 1910 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 69; (DIN EN 60529) |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 160 |
| UL approval | UL approval no.; I038; File number UL; E174189 |
| UL approval no. | I038 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 835.5 |
| Housing | rectangular |
| Inlet pipe length | 5 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions[mm] [mm] | 220 x 50.5 x 74.9 |
| Materials | housing: stainless steel (316L/1.4404); connector: PEI, FKM |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4435); Process connection: stainless steel (316L/1.4404) |
| Nominal diameter | DN40 (1 1/2“) |
| Process connection | Clamp DN40 DIN 32676 series A |
| Process connection suitable for pipe standard | DN40 / Ø 41 mm x 1.5 mm; (DIN 11866 series A); (DIN EN 10357 series A) |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.4 µm (16 µin); Rz = 4 µm (157 µin) |
Displays / operating elements
| Display | operating status; 1 x LED, green |
| operating status | 1 x LED, green |
Accessories
| Items supplied | package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the specified surface characteristics Ra/Rz of the wetted surfaces do not apply to the weld seam. |
| Pack quantity | 1 pcs. |
Electrical connection - plug
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
12か月保証すべての新品在庫が対象
3か月保証中古・整備済み部品が対象
30日間返品可能未使用品は返品手数料無料
世界中に配送追跡可能な迅速な配送を全世界へ
