ホーム / IFM / IFM SM6020

お問い合わせにより対応可能

IFM SM6020

Name: IFM SM6020
Brand: IFM
SKU: SM6020

型番（MPN）: SM6020 · ブランド: IFM

価格はお問い合わせください

見積もりを依頼する

12か月保証（新品）・3か月保証（中古・整備済み）

30日間返品可能、未使用品は返品手数料無料

配送業者

基本情報

在庫状況	お問い合わせにより確認
カテゴリー	Magnetic-inductive volumetric flow meters
保証	12か月（新品）・3か月（中古・整備済み）

配送・在庫状況

SM6020はいつ発送できますか？

SM6020はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。

SM6020を直接引き取ることはできますか？

オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。

エクスプレス配送は利用できますか？

はい — SM6020の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。

工場が停止しており緊急で必要です — 対応可能ですか？

重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — SM6020について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。

Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link

仕様

Product characteristics

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1
Measuring range	0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm
0.05...35 l/min	0.003...2.1 m³/h
Process connection	threaded connection G 1/2 external thread DN15 flat seal

Application

Special feature	Gold-plated contacts
Media	conductive liquids; water; hydrous media
Note on media	conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C)
Medium temperature[°C] [°C]	-20...90
Pressure rating	16 bar; 1.6 MPa
16 bar	1.6 MPa

Electrical data

Operating voltage[V] [V]	18...30 DC; (to SELV/PELV)
Current consumption[mA] [mA]	< 80
Protection class	III
Reverse polarity protection	yes
Power-on delay time[s] [s]	5
Measuring principle	magnetic-inductive

Inputs / outputs

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Inputs

counter reset

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable)
Electrical design	PNP/NPN
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]	2
Permanent current rating of switching output DC[mA] [mA]	100
Number of analogue outputs	1
Analogue current output[mA] [mA]	4...20; (scalable)
Max. load[Ω] [Ω]	500
Pulse output	flow rate meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range	0.05...35 l/min; 0.003...2.1 m³/h; 0.6...555 gph; 0.01...9.25 gpm
0.05...35 l/min	0.003...2.1 m³/h
Display range	-42...42 l/min; -2.5...2.5 m³/h; -666...666 gph; -11.1...11.1 gpm
-42...42 l/min	-2.5...2.5 m³/h
Resolution	0.02 l/min; 0.002 m³/h; 0.6 gph; 0.01 gpm
0.02 l/min	0.002 m³/h
Set point SP	0.25...35 l/min; 0.015...2.1 m³/h; 4.2...555 gph; 0.07...9.25 gpm
0.25...35 l/min	0.015...2.1 m³/h
Reset point rP	0...34.8 l/min; 0...2.08 m³/h; 1.2...552 gph; 0.02...9.2 gpm
0...34.8 l/min	0...2.08 m³/h
Analogue start point ASP	0...28 l/min; 0...1.7 m³/h; 0...666 gph; 0...7.4 gpm
0...28 l/min	0...1.7 m³/h
Analogue end point AEP	7...35 l/min; 0.42...2.1 m³/h; 111...555 gph; 1.85...9.25 gpm
7...35 l/min	0.42...2.1 m³/h
Low flow cut-off LFC	0.05...1.75 l/min; 0.003...0.1 m³/h; 0.6...27.6 gph; 0.01...0.46 gpm
0.05...1.75 l/min	0.003...0.1 m³/h
Frequency end point, FEP	7...35 l/min; 0.42...2.1 m³/h; 111.6...555 gph; 1.86...9.25 gpm
Frequency at the end point FRP[Hz] [Hz]	1...10000
Pulse length[s] [s]	0.001...2
Pulse value	0.001...99990000 I
Measuring range[°C] [°C]	-20...90
Display range[°C] [°C]	-42...112
Resolution[°C] [°C]	0.1
Set point SP[°C] [°C]	-19.6...90
Reset point rP[°C] [°C]	-20...89.6
Analogue start point[°C] [°C]	-20...68
Analogue end point[°C] [°C]	2...90
In steps of[°C] [°C]	0.1

Accuracy / deviations

Accuracy (in the measuring range)	± (0,8 % MW + 0,2 % MEW)
Repeatability	± 0,2 % MEW
Accuracy[K] [K]	± 2,5 (Q > 5 % MEW)

Response times

Start-up delay[s] [s]	0...50
Response time[s] [s]	15; (Q > 10 % MEW, T09)
Damping process value dAP[s] [s]	0...5

Software / programming

Parameter setting options

hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit

Interfaces

Communication interface	IO-Link
Transmission type	COM2 (38,4 kBaud)
IO-Link revision	1.1
SDCI standard	IEC 61131-9
Profiles	Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution
Common - I&D	Identification and Diagnosis
Function	Measurement data, standard resolution
SIO mode	yes
Required master port type	A
Process data analogue	3
Process data binary	2
Min. process cycle time[ms] [ms]	8
Supported DeviceIDs	default; 949
default	949

Operating conditions

Ambient temperature[°C] [°C]	-20...60
Storage temperature[°C] [°C]	-25...80
Protection	IP 65; IP 67

Tests / approvals

EMC	DIN EN 60947-5-9
CPA approval	model number; 005MI; accuracy class; -; maximum allowable error; ± 1,0 % FS; Q (min); 0,003 m³/h; Q (t); -; Q (max); 2,1 m³/h
model number	005MI
accuracy class	-
maximum allowable error	± 1,0 % FS
Q (min)	0,003 m³/h
Q (t)	-
Q (max)	2,1 m³/h
Shock resistance	DIN IEC 68-2-27; 20 g (11 ms)
DIN IEC 68-2-27	20 g (11 ms)
Vibration resistance	DIN IEC 68-2-6:; 5 g (10...2000 Hz)
DIN IEC 68-2-6:	5 g (10...2000 Hz)
MTTF[years] [years]	114
UL approval	UL approval no.; I014; File number UL; E174189
UL approval no.	I014
File number UL	E174189
Pressure Equipment Directive	Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]	717.2
Housing	rectangular
Dimensions[mm] [mm]	110 x 48 x 73
Materials	stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30
Materials (wetted parts)	Pipe section: stainless steel (316L/1.4404); Process connection sealing: NBR reinforced fibre Flat seal; FKM; PEEK; carbon fibre PEEK
Process connection	threaded connection G 1/2 external thread DN15 flat seal