お問い合わせにより対応可能
ISO cylinder-DDPC-...-80- -
型番（MPN）: DDPC-...-80- - · ブランド: Festo
価格はお問い合わせください
見積もりを依頼する
12か月保証（新品）・3か月保証（中古・整備済み）
30日間返品可能、未使用品は返品手数料無料
配送業者
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | DDPC |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
DDPC-...-80- -はいつ発送できますか？
DDPC-...-80- -はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
DDPC-...-80- -を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — DDPC-...-80- -の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — DDPC-...-80- -について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
Standards-based cylinder to ISO 15552 , With displacement encoder for contactless measurement , Suitable for positioning with axis controller CPX-CMAX , Suitable for end-position control with end-position controller CPX-CMPX or SPC11 , Can be used as a measuring cylinder , Piston rod variants , Fixed cushioning , With optional recirculating ball bearing guide, clamping unit
仕様
Specifications
| Stroke | 10, 2000 mm |
| Stroke Servopneumatic positioning | 50, 750 mm |
| Stroke Smart Softstop | 50, 750 mm |
| Stroke reduction at end positions | >= 15 mm |
| Smallest positioning stroke | 3% of max. stroke, Max. 10 mm |
| Piston diameter | 80 mm |
| Based on standard | ISO 15552 (previously also VDMA 24562, ISO 6431, NF E49 003.1, UNI 10290) |
| Cushioning | Elastic cushioning rings/plates at both ends |
| Positioning installation position | optional |
| Soft Stop installation position | Optional |
| Functional principle of measuring system | Digital |
| Design | Piston, Piston rod, Profile barrel |
| Position detection | Via proximity switch, With integrated displacement encoder |
| Variants | Extended piston rod, Piston rod at one end |
| Protection against torque/guide | Guide rod with yoke, Square piston rod |
| Operating pressure | 174 psi |
| Operating pressure positioning/Soft Stop | 4, 8 bar |
| Max. travel speed | 1 m/s |
| Min. travel speed | 0.05 m/s |
| Typical positioning time short stroke, horizontal | 0.77/0.95 s |
| Typical positioning time long stroke, horizontal | 0.88/1.02 s |
| Mode of operation | Double-acting |
| Nominal operating voltage DC | 5 V |
| Approval | RCM trademark |
| CE mark (see declaration of conformity) | To EU EMC Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK RoHS instructions |
| Operating medium | Compressed air to ISO 8573-1:2010 [6:4:4] |
| Note on operating and pilot medium | Dew point at least 10 °C below the ambient temperature and temperature of the medium |
| Continuous shock resistance to DIN/IEC 68 Part 2-82 | Tested to severity level 2 |
| Corrosion resistance class CRC | 1 - Low corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Max. magnetic interference field | 10 KA/m at a distance of 100 mm |
| Degree of protection | IP65, To IEC 60529 |
| Vibration resistance to DIN/IEC 68 Part 2-6 | Tested to severity level 2 |
| Ambient temperature | -20, 80 °C |
| Impact energy in end positions | 1.8 J |
| Max. torque for protection against torsion | 3 Nm |
| Max. working load, horizontal | 300 kg |
| Max. working load, vertical | 100 kg |
| Min. working load, horizontal | 20 kg |
| Min. working load, vertical | 20 kg |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke | 2721 N |
| Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke | 3016 N |
| Moving mass for 0 mm stroke | 804 g |
| Additional moving mass per 10 mm stroke | 31 g |
| Basic weight for 0 mm stroke | 3053 g |
| Additional weight per 10 mm stroke | 87 g |
| Output signal | Analogue |
| Repetition accuracy in ± mm | 0.5 mm |
| Max. controllable force during advance stroke | 2714 N |
| Max. controllable force during return stroke | 2449 N |
| Typical friction force | 140 N |
| Repetition accuracy Soft Stop intermediate position | +/-2 mm |
| Electrical connection encoder | 8-pin |
| Cable length | 1.5 m |
| Type of mounting | With accessories |
| Pneumatic connection | G3/8 |
| Note on materials | RoHS-compliant |
| Material cover | Wrought aluminium alloy |
| Material seals | FPM, NBR, TPE-U(PU) |
| Material cable sheath | TPE-U(PUR) |
| Material piston rod | High-alloy steel |
| Material screws | Steel |
| Material sensor cover | Aluminium |
| Material sensor head | POM |
| Material connector housing | PBT |
| Material cylinder barrel | Wrought aluminium alloy |
12か月保証すべての新品在庫が対象
3か月保証中古・整備済み部品が対象
30日間返品可能未使用品は返品手数料無料
世界中に配送追跡可能な迅速な配送を全世界へ
Festoの他の部品
お問い合わせにより対応可能Push-in connector-NPQP-D-Q6-S8-FD-P10型番（MPN）: NPQP-D-Q6-S8-FD-P10 · Festo
価格はお問い合わせください
見積もりを依頼
お問い合わせにより対応可能Push-in T-fitting-NPQE-LT-R18-Q4-P10型番（MPN）: NPQE-LT-R18-Q4-P10 · Festo
価格はお問い合わせください
見積もりを依頼