BALL NUT SEM-E-S 32X20RX3,969-2
見積もりを依頼する
基本情報
| 在庫状況 | お問い合わせにより確認 |
| カテゴリー | Ball screw assembly nuts |
| ライフサイクル | active |
| 保証 | 12か月（新品）・3か月（中古・整備済み） |
配送・在庫状況
R151237014はいつ発送できますか？
R151237014はお問い合わせにより調達いたします — 見積もりを依頼いただければ、この個体の正確な在庫状況と配送スケジュールをご案内いたします。
R151237014を直接引き取ることはできますか？
オランダ・フローニンゲンの当社倉庫での引き取りが可能な場合があります — ご注文前にお問い合わせいただき、在庫状況と引き取り日時をご確認ください。
エクスプレス配送は利用できますか？
はい — R151237014の見積もり依頼時にその旨をお知らせいただければ、返信にエクスプレス配送のオプションを含めてご案内いたします。
工場が停止しており緊急で必要です — 対応可能ですか？
重大な故障の場合は、+31 (0)50-7110348またはsales@partnerplc.comまで直接ご連絡ください — R151237014について、在庫状況と配送先に応じて即日クーリエまたは専用タクシー・ホットショット配送を検討いたします。
Adjustable-preload single nut SEM-E-S with standard seal and standard axial clearance<br>Nominal diameter d0 = 32<br>Lead P = 20 (right)<br>Ball diameter Dw = 3.969<br>Number of ball track turns i = 2 Rexroth connection dimensions With seals With left-hand version in some cases Adjustable preload Tolerance grade: T3 (for sizes as per the product overview for screws, see General Technical Notes and Information "Product description"), T5, T7
仕様
Specifications
| Nominal size [mm] | 32 x 20R x 3,969 - 2 |
| Series | Standard series |
| Dynamic load capacity C [N] | 16200.0 |
| Note: dynamic load capacity C | The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes). |
| Maximum permissible linear speed vmax (m/min) [m/min] | 94.0 |
| Note: maximum permissible speed vmax | See "Characteristic speed d<sub>0 </sub>• n" (section Technical notes) and "Critical speed n<sub>cr</sub>" (section Calculation and examples) |
| Operating temperature (min. … max.) | -10 °C ... +80 °C |
| Storage temperature (min. … max.) | -15 °C ... +80 °C |
| Direction of lead | Right |
| Nut type | SEM-E-S zero-clearance adjustable single nut |
| Note: permissible operating temperature (min. ... max.) | Permissible operating temperatures Ball screw assemblies permit operation at continuous temperatures of up to 80 °C with temporary peaks of 100 °C, measurements taken on the outer shell of the nut in each case. |
| Hole pattern | BB7 |
| Screw drive seal | With seal |
| Weight [kg] | 1.22 |
| Static load capacity C0 [N] | 21800.0 |
| Note: static load capacity C0 | The load capacities are valid for tolerance grade T3 and T5 only. For other tolerance grades, please take into account the correction factor f<sub>ac</sub> (see General Technical Notes and Information "Technical Data", Technical Notes). |
| Category | A |
| Maximum operating temperature [°C] | +80 |
| Bearing temperature max [°C] | +80 |
| Minimum operating temperature [°C] | -10 |
| Bearing temperature min [°C] | -15 |
| Dimension d1 [mm] | 31 |
| Dimension D1 f9 [mm] | 56 |
| Dimension D1 max [mm] | 55.969 |
| Dimension D1 min [mm] | 55.941 |
| Dimension d2 [mm] | 27.9 |
| Dimension D5 [mm] | 80 |
| Dimension D6 [mm] | 68 |
| Dimension D7 [mm] | 6.6 |
| Dimension L [mm] | 64 |
| Dimension L10 [mm] | 22 |
| Dimension L3 [mm] | 20 |
| Dimension L4 [mm] | 22 |
| Dimension L5 [mm] | 22 |
| Dimension Sx [mm] | 4 |
| Angle φ [°] | 60 |
Bosch Rexrothの他の部品
中古Rexroth HCS03.1E-W0150-A-05-NNBV Used
中古Rexroth HCS01.1E-W0009 -A-02-B-ET-EC- NN-L4-NN-FW Used