IFM RMO300
Angebot anfordern
Kurzübersicht
| Verfügbarkeit | Bestätigung auf Anfrage |
| Kategorie | Absolute multiturn encoders |
| Garantie | 12 Monate (neu) · 3 Monate (gebraucht/aufbereitet) |
Versand & Verfügbarkeit
Wann kann RMO300 versendet werden?
RMO300 wird auf Anfrage beschafft — fordern Sie ein Angebot an, wir bestätigen die genaue Verfügbarkeit und Lieferzeit für dieses konkrete Teil.
Kann ich RMO300 persönlich abholen?
Eine Abholung in unserem Lager in Groningen, Niederlande ist eventuell möglich — kontaktieren Sie uns vor der Bestellung, um Verfügbarkeit und einen Abholtermin zu klären.
Ist Expressversand verfügbar?
Ja — erwähnen Sie es bei Ihrer Angebotsanfrage für RMO300, wir nennen Ihnen in unserer Antwort die Expressversandoptionen.
Unser Betrieb steht still und wir brauchen es dringend — können Sie helfen?
Bei einem kritischen Ausfall kontaktieren Sie uns direkt unter +31 (0)50-7110348 oder sales@partnerplc.com — wir prüfen dann Same-Day-Kurier- oder Taxi-/Hotshot-Lieferung für RMO300, abhängig von Verfügbarkeit und Zielort.
Absolute position traceability even when unpowered Bearing operating time measurement for efficient maintenance planning Freely programmable total resolution up to 31 bits Programmable digital switching input/output High shock and vibration resistance thanks to magnetic sensing principle User-friendly communication and parameterisation via IO-Link
Spezifikationen
Product characteristics
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
| Communication interface | IO-Link |
| Shaft design | hollow shaft open to one side |
| Shaft diameter[mm] [mm] | 15 |
Application
| Function principle | absolute |
| Revolution type | multiturn |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (; to PELV) |
| Rated insulation voltage[V] [V] | 30 |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Max. power-on delay time[ms] [ms] | 1000 |
| Max. revolution electrical[U/min] [U/min] | 12000 |
Outputs
| Short-circuit protection | yes |
Measuring/setting range
| Resolution | 65536 steps; 32768 revolutions; 31 bit |
Accuracy / deviations
| Accuracy[°] [°] | 0.1 |
Software / programming
| Parameter setting options | preset; zero point; direction of rotation; rotational speed |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Multiple switching signal; Function; Measurement data, high resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, high resolution |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 2.3 |
| IO-Link process data (cyclical) | process value; 96; device status; 4; binary switching information; 5 |
| process value | 96 |
| device status | 4 |
| binary switching information | 5 |
| IO-Link functions (acyclical) | application specific tag; operating hours counter; internal temperature; switching cycles counter |
| Supported DeviceIDs | default; 1064 |
| default | 1064 |
| Note | For further information please see the IODD PDF file under "Downloads" |
Operating conditions
| Ambient temperature[°C] [°C] | -40...85 |
| Storage temperature[°C] [°C] | -40...85 |
| Max. relative air humidity[%] [%] | 98; (condensation not permissible) |
| Protection | IP 65; (on the housing: IP 67; on the shaft: IP 64) |
Tests / approvals
| EMC | DIN EN 61000-4-2 ESD; 4 kV CD; DIN EN 61000-4-3 HF radiated; 10 V/m; DIN EN 61000-4-4 Burst; 2 kV; DIN EN 61000-4-6 HF conducted; 10 V |
| DIN EN 61000-4-2 ESD | 4 kV CD |
| DIN EN 61000-4-3 HF radiated | 10 V/m |
| DIN EN 61000-4-4 Burst | 2 kV |
| DIN EN 61000-4-6 HF conducted | 10 V |
| Vibration resistance | 30 g (10...1000 Hz) |
| DIN EN 60068-2-6 | 10 g / 10...1000 Hz half-sine |
| Shock resistance | DIN EN 60068-2-27; 100 g 6 ms |
| DIN EN 60068-2-27 | 100 g 6 ms |
| Continuous shock resistance | DIN EN 60068-2-29; 10 g / 16 ms half-sine |
| DIN EN 60068-2-29 | 10 g / 16 ms half-sine |
| MTTF[years] [years] | 283 |
| UL approval | power supply; Class 2 |
| power supply | Class 2 |
Mechanical data
| Weight[g] [g] | 417.2 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 58 / L = 69 |
| Materials | flange: aluminium; housing: stainless steel (444/1.4521) |
| Max. starting torque[Nm] [Nm] | 0.01 |
| Reference temperature torque[°C] [°C] | 20 |
| Shaft design | hollow shaft open to one side |
| Shaft diameter[mm] [mm] | 15 |
| Shaft material | stainless steel |
| Max. shaft load axial (at the shaft end)[N] [N] | 40 |
| Max. shaft load radial (at the shaft end)[N] [N] | 110 |
| Installation depth of shaft[mm] [mm] | 28 |
| Max. axial shaft misalignment[mm] [mm] | 0,5 |
| Fixing flange | clamping flange |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection - plug
| Connector | 1 x M12; coding: A; Moulded body: stainless steel (316 / 1.4401) |
