Wago

Mounting plate; 4-pole; for distribution connectors; Plastic; black

Jumper; 5-way; insulated; light gray

Cover; for stud terminal block; 120 mm²; yellow

WSB marking card; as card; MARKED; 41 ... 50 (10x); not stretchable; Vertical marking; snap-on type; white

Board-to-Board Link; Pin spacing 4 mm; 2-pole; Length: 30 mm; white

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 3.81 mm; 10-pole; orange

End plate; with fixing flange M4; 2.5 mm thick; gray

Step-down cover plate; 1 mm thick; in connection with 3-conductor 282-681 terminal blocks; gray

Stickers for operating instructions

Basic relay; Nominal input voltage: 230 VAC; 4 changeover contacts; Limiting continuous current: 5 A; with manual operation; Module width: 21 mm; Module height: 35mm

Mini-WSB marking card; as card; MARKED; 24 V (100x); not stretchable; Horizontal marking; snap-on type; red

Mounting adapter; for DIN-35 rail/panel mounting; fixed on DIN-rail 35; Pin spacing 7.62 mm; light gray

Strain relief housing; for female and male connectors; 2 parts; Pin spacing 3.81 mm; 4-pole; orange

Self-tapping screw

Insulating tape for flat cable; 3-pole; black

Labels; for TP printers; permanent adhesive; 500 pieces on roll; white

Jumper; 3-way; unplated; silver-colored

Basic relay; Nominal input voltage: 12 VDC; 1 changeover contact; Limiting continuous current: 16 A; Module width: 13 mm; Module height: 15 mm

Marking strips; as a DIN A4 sheet; MARKED; 1-20 (80x); Height of marker strip: 3 mm; Strip length 182 mm; Horizontal marking; Self-adhesive; white

Mounting carrier; 2- to 5-pole; for flying leads; white

End plate; 1.5 mm thick; gray

Jumper; 6-way; insulated; light gray

End plate; snap-fit type; 1.5 mm thick; green-yellow

Jumper; 2-way; insulated; gray