متاح عند الطلب

h-distribution connector; 2-pole; Cod. B; 1 input; 2 outputs; outputs on one side; 2 locking levers; light green

رقم القطعة (MPN): 770-1652 · العلامة التجارية: Wago
السعر عند الطلب
طلب عرض سعر

يرد شخص حقيقي، عادةً خلال يوم عمل واحد — راجع سياسة الخصوصية.

ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر

معلومات سريعة

التوفريُؤكَّد عند الطلب
الفئةPluggable Connectors
دورة الحياةactive
الضمان12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)

الشحن والتوفر

متى يمكن شحن 770-1652؟

770-1652 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.

هل يمكنني استلام 770-1652 شخصيًا؟

قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.

هل التوصيل السريع متاح؟

نعم — اذكر ذلك عند طلب عرض سعر لـ770-1652 وسنُدرج خيارات التوصيل السريع في ردنا.

مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟

في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـ770-1652، حسب التوفر والوجهة.

<h2>Distribution connector <i>WINSTA</i>® MIDI B coding</h2><br/><br/>The <i>WINSTA</i>® MIDI distribution connector rated current 25 A is the pluggable solution for your use in control cabinets, on PCBs or for lighting connections. The pluggable installation connectors with spring pressure connection technology work entirely without screw connections. They allow flexible, error-free installation in numerous possible uses. The coding options reduce installation errors, allowing fast, secure wiring of all components. The pluggable installation connector is protected against ingress by solid objects in accordance with protection type IP20 (When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)). Solutions like the <i>WINSTA</i>® MIDI pluggable installation connectors with B coding are appropriate for applications involving process control, such as for lighting or in data networks. Important parameters in the selection of a pluggable installation connector are the rated current and voltage: They tell us about the product's domains of use. This product has a current rating of 25 A – so it is suitable for robust loads. The <i>WINSTA</i>® MIDI Pluggable Connection System with Push-in CAGE CLAMP® spring pressure connection technology facilitates exemplary electrification. Thanks to the included test slot, it is possible to check connections even when they are plugged in. This saves time, labor, and money.<br/><br/><h3>Push-in CAGE CLAMP® spring pressure connection technology – pluggable installation instead of laborious screw connections!</h3><br/><br/>The WINSTA® Pluggable Connection System is ideally tailored to the strict requirements of building installation. It makes electrical installation pluggable, and consequently faster, more reliable, and error-free. Use of this pre-assembled system reduces time spent on assembly and errors during installation at the construction site. Enjoy the benefits of the pluggable version of our maintenance-free spring pressure connection technology too! Plan your installation with with locking lever from WAGO. <br/><br/><ul><br/><li>protection against mismating eliminates errors</li><li>pre-assembled versions</li><li>for automation controllers</li><li>ready for immediate use</li><li>quick replacement of defective units during ongoing operation</li></ul>

المواصفات

Notes

Variants:Other pole markings, Other versions (or variants) can be requested from WAGO Sales or configured at https://configurator.wago.com/.

Electrical data - Ratings per IEC/EN

Ratings perIEC/EN 60664-1
Nominal voltage (III/3)250 V
Rated impulse withstand voltage (III / 3)4 kV
Rated current25 A
Legend (ratings)(III / 3) ≙ Overvoltage category III / Pollution degree 3
Ratings perIEC/EN 60664-1 / IEC/EN 60664-1 / IEC/EN 60664-1
Overvoltage categoryIII / III / II
Pollution degree3 / 2 / 2
Nominal voltage250 V
Rated impulse withstand voltage4 kV
Rated current25 A

Electrical data - Ratings per UL 1977

Note for the US marketSome versions may also be used for current interruption in accordance with the UL certificate in select applications with currents below 16 A and voltages up to 600 V. For further information, please contact your local sales office.
Rated voltage (UL 1977)600 V
Rated current UL 197723 A
Approvals perUL 1977
Rated voltage600 V
Rated current23 A

Electrical data - General information

Note on contact resistanceapprox. 1 mΩ of contact resistance approx. 0.25 mΩ contact transition plug/socket

Connection data

Total number of potentials2

Connection data - Connection 1

Pole number2

Physical data

Pin spacing10 mm / 0.394 inches
Width20 mm / 0.787 inches
Height32.7 mm / 1.287 inches
Depth50.8 mm / 2 inches

Mechanical data

UseControl technology
CodingB
Marking1 2
Potential marking1 2
Mating force of a plug-in connectionapprox. 20 … 70 N (depending on pole number)
Retention force of a plug-in connectionWhen locked: > 80 N
Unmating force of a plug-in connectionUnlocked: approx. 20 … 70 N (depending on pole number)
Number of mating cycles200, without resistive load
Type of distribution boxh-distribution connector, outputs at one end
Protection typeIP20; When mated: IP2xC (These compact connectors are not designed for use in open, easily accessible areas!)

Plug-in connection

Contact type (pluggable connector)Socket/plug
Mismating protectionYes
Note on mismating protectionAll WINSTA® components are 100% protected against mismating when:a.) plugging different numbers of polesb.) plugging while rotated 180 c.) plugging while laterally staggeredd.) plugging one pole
Locking leveryes
Locking of plug-in connectionlocking lever
Note on locking systemAll connectors for mounted installations (snap-in versions for lighting fixtures or devices, all types of PCB and distribution connectors) are factory-equipped with locking levers to ensure plugs and sockets are securely locked. Additional locking levers are only required for flying leads (plug/socket).

Material data

Note (material data)Information on material specifications can be found here
Colorlight green
Insulation material (main housing)Polyamide (PA66)
Flammability class per UL94V0
Contact materialCopper or copper alloy; surface-treated
Contact platingTin
Fire load0.259 MJ
Weight15.2 g

Environmental requirements

Processing temperature-5 … +40 °C
Continuous operating temperature-35 … +85 °C
Note on continuous operating temperatureInsulating parts for temperatures ≤ 105 °C

Commercial data

Product Group20 (Winsta)
PU (SPU)50 pcs
Packaging typebox
Country of originDE
GTIN4050821531203
Customs tariff number85366990990

Product Classification

UNSPSC39121421
eCl@ss 10.027-44-06-03
eCl@ss 9.027-44-06-03
ETIM 9.0EC002567
ETIM 10.0EC002567
ECCNNO US CLASSIFICATION

Environmental Product Compliance

RoHS Compliance StatusCompliant,No Exemption
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم

المزيد من قطع Wago

Wago - 8MCSمستعملWago - 8MCS
رقم القطعة (MPN): 8MCS · Wago
€5.30
عرض التفاصيل
Wago - 4MCSمستعملWago - 4MCS
رقم القطعة (MPN): 4MCS · Wago
€5.30
عرض التفاصيل
Wago AW6 26-14مستعملWago AW6 26-14
رقم القطعة (MPN): AW6 26-14 · Wago
€5.30
عرض التفاصيل
WAGO 750-602 UsedمستعملWAGO 750-602 Used
رقم القطعة (MPN): 750-602 · Wago
€10.60
عرض التفاصيل