IFM SV4610
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Vortex flow meters with display |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن SV4610؟
SV4610 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام SV4610 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـSV4610 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـSV4610، حسب التوفر والوجهة.
Reliable detection of flow and medium temperature With switching output or frequency output and IO-Link Display can be rotated for optimum alignment Clearly readable colour display with red/green colour change Suitable for water, deionised water and cooling water Convenient operation via buttons or parameter setting via IO-Link
المواصفات
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | 16...317 gph; 0.26...5.28 gpm |
| 16...317 gph | 0.26...5.28 gpm |
| Process connection | threaded connection 1/2" NPT internal thread DN8 |
Application
| Special feature | Gold-plated contacts |
| Application | for industrial applications |
| Media | water; glycol solutions; coolants |
| Medium temperature[°F] [°F] | 14...194 |
| Pressure rating | 12 bar; 174 psi; 1.2 MPa |
| 12 bar | 174 psi |
| Note on pressure rating | up to 40 °C |
| MAWP for applications according to CRN[bar] [bar] | 3.9 |
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
| Current consumption[mA] [mA] | < 30 |
| Min. insulation resistance[MΩ] [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 3 |
| Measuring principle | Vortex |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; frequency signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Short-circuit protection | yes |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 16...317 gph; 0.26...5.28 gpm |
| 16...317 gph | 0.26...5.28 gpm |
| Display range | 0...380 gph; 0...6.34 gpm |
| 0...380 gph | 0...6.34 gpm |
| Resolution | 1 gph; 0.02 gpm |
| 1 gph | 0.02 gpm |
| Set point SP | 19...317 gph; 0.32...5.28 gpm |
| 19...317 gph | 0.32...5.28 gpm |
| Reset point rP | 16...314 gph; 0.26...5.24 gpm |
| 16...314 gph | 0.26...5.24 gpm |
| Frequency end point, FEP | 63...317 gph; 1.06...5.28 gpm |
| 63...317 gph | 1.06...5.28 gpm |
| In steps of | 1 gph; 0.02 gpm |
| Frequency at the end point FRP[Hz] [Hz] | 100...1000 |
| Measuring dynamics | 1:20 |
| Measuring range[°F] [°F] | 14...194 |
| Display range[°F] [°F] | -22...230 |
| Resolution[°F] [°F] | 1 |
| Set point SP[°F] [°F] | 16...194 |
| Reset point rP[°F] [°F] | 14...192 |
| In steps of[°F] [°F] | 1 |
| Frequency start point, FSP[°F] [°F] | 14...158 |
| Frequency end point, FEP[°F] [°F] | 50...194 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± 2 % MEW; (water) |
| Repeatability | ± 0,5 % MEW |
| Accuracy[K] [K] | ± 1 |
Response times
| Response time[s] [s] | 1; (dAP = 0) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | T09 = 6 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; frequency output; switch-on/switch-off delay; Damping; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 3 |
| Supported DeviceIDs | default; 486 |
| default | 486 |
Operating conditions
| Ambient temperature[°F] [°F] | 32...140 |
| Note on ambient temperature | medium temperature < 176 °F; medium temperature < 194 °F: 32...122 °F |
| Storage temperature[°F] [°F] | -4...176 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 5 g (11 ms) |
| DIN EN 60068-2-27 | 5 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; with water / 10...50 Hz 1 mm; with water / 50...2000 Hz 2 g |
| DIN EN 60068-2-6 | with water / 10...50 Hz 1 mm |
| MTTF[years] [years] | 342 |
| UL approval | UL approval no.; I001 |
| UL approval no. | I001 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 481.5 |
| Housing | rectangular |
| Dimensions[mm] [mm] | 119 x 45 x 72 |
| Materials | stainless steel (316L/1.4404); PC; PBT+PC-GF30; PPS; TPE-U |
| Materials (wetted parts) | stainless steel (316L/1.4404); ETFE; PA 6T; PPS; FKM |
| Tightening torque[Nm] [Nm] | 30 |
| Process connection | threaded connection 1/2" NPT internal thread DN8 |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; 2 x LED, yellow |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |



