متاح عند الطلب
IFM SUH451
رقم القطعة (MPN): SUH451 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Ultrasonic flow meters |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن SUH451؟
SUH451 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام SUH451 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـSUH451 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـSUH451، حسب التوفر والوجهة.
Accurate flow measurement of ultrapure water, water and edible oils A robust, component-free measuring pipe made of stainless steel offers high media resistance and permanent ingress resistance The highly accurate inline measurement process eliminates any influence of varying wall thicknesses and pipe materials Operating status LED signals the sensor status and allows conclusions about process quality User-friendly communication and parameterisation via IO-Link
المواصفات
Product characteristics
| Measuring range | 5...1000 l/min; 0.3...60 m³/h; 79...15850 gph; 1.32...264.18 gpm |
| 5...1000 l/min | 0.3...60 m³/h |
| Nominal diameter | DN50 (2“) |
| Process connection | Clamp 2" DIN 32676 series C (ASME BPE) |
Application
| Special feature | Gold-plated contacts |
| Application | food and beverage industry |
| Media | ultra-pure water; water; hydrous media; edible oils |
| Note on media | hydrous media: for media with >10 % additives, the repeatability is the only available value; edible oils: palm oil, soy oil, rapeseed oil, sunflower oil, peanut oil, olive oil and others |
| Medium temperature[°C] [°C] | -40...130; (< 1 h: 150) |
| Min. burst pressure | 75 bar; 7.5 MPa |
| 75 bar | 7.5 MPa |
| Pressure rating | 25 bar; 2.5 MPa |
| 25 bar | 2.5 MPa |
| Note on pressure rating | take into account the pressure resistance of the bracket and the seal used for clamp connection |
| Vacuum resistance[mbar] [mbar] | -1000 |
Electrical data
| Operating voltage[V] [V] | 18...32 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 75 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | ultrasonic |
Inputs / outputs
| Total number of inputs and outputs | 2 |
Inputs
| Inputs | OUT2; counter reset |
| OUT2 | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | OUT1; switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link; OUT2; switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| OUT1 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; frequency signal; IO-Link |
| OUT2 | switching signal; pulse signal; diagnostic signal; totaliser switching signal; analogue signal |
| Electrical design | PNP/NPN |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | -40...130 °C; -40...266 °F |
| 5...1000 l/min | 0.3...60 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.1 l/min | 0.001 m³/h |
| Note on factory setting | gpm, °F |
| Set point SP | -39.4...130 °C; -38.9...266 °F |
| 10.5...1000 l/min | 0.63...60 m³/h |
| Reset point rP | -40...129.4 °C; -40...264.9 °F |
| 5.3...994.8 l/min | 0.318...59.688 m³/h |
| Analogue start point ASP | -1000...800 l/min; -60...48 m³/h; -15850...12680 gph; -264.17...211.34 gpm |
| -1000...800 l/min | -60...48 m³/h |
| Analogue end point AEP | -800...1000 l/min; -48...60 m³/h; -12680...15850 gph; -211.34...264.17 gpm |
| -800...1000 l/min | -48...60 m³/h |
| Low flow cut-off LFC | 5...50 l/min; 0.3...3 m³/h; 79...793 gph; 1.32...13.21 gpm |
| 5...50 l/min | 0.3...3 m³/h |
| Frequency end point, FEP | -6...130 °C; 21.2...266 °F |
| 200.6...1000 l/min | 12.037...60 m³/h |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.002...2 |
| Pulse value | 0.1...99990000 I; 0.026…26414563.515 gal |
| -40...130 °C | -40...266 °F |
| 0.1 °C | 0.1 °F |
| -39.4...130 °C | -38.9...266 °F |
| -40...129.4 °C | -40...264.9 °F |
| Analogue start point | -40...96 °C; -40...204.8 °F |
| -40...96 °C | -40...204.8 °F |
| Analogue end point | -6...130 °C; 21.2...266 °F |
| -6...130 °C | 21.2...266 °F |
| Frequency start point, FSP | -40...96 °C; -40...204.8 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | edible oils; ± (5,0 % MW + 1,0 % MEW); water; ± (1,0 % MW + 0,5 % MEW) |
| edible oils | ± (5,0 % MW + 1,0 % MEW) |
| water | ± (1,0 % MW + 0,5 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
| Temperature coefficient[% of the span / 10 K] [% of the span / 10 K] | 0,2 |
Response times
| Response time[s] [s] | < 0.25; (dAP = 0, T09) |
| Damping process value dAP[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | 5,7 / 86 |
Software / programming
| Diagnostic functions | direction of flow detection; signal quality |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1.3 |
| SDCI standard | IEC 61131-9: 2013-07 |
| Profiles | BLOB; Binary Large Object transfer; Common - I&D; Identification and Diagnosis |
| BLOB | Binary Large Object transfer |
| Common - I&D | Identification and Diagnosis |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 9.6 |
| IO-Link process data (cyclical) | totaliser; 32; Flow monitoring; 32; Temperature monitoring; 32; status; 4; Output 1; 1; Output 2; 1 |
| totaliser | 32 |
| Flow monitoring | 32 |
| Temperature monitoring | 32 |
| status | 4 |
| Output 1 | 1 |
| Output 2 | 1 |
| Supported DeviceIDs | default; 1952 |
| default | 1952 |
Operating conditions
| Ambient temperature[°C] [°C] | -20...60 |
| Storage temperature[°C] [°C] | -25...80 |
| Protection | IP 69; (DIN EN 60529) |
Tests / approvals
| EMC | DIN 61326-1:2021 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11ms) |
| DIN IEC 68-2-27 | 20 g (11ms) |
| Vibration resistance | DIN IEC 68-2-6; 20 g (10...2000Hz) |
| DIN IEC 68-2-6 | 20 g (10...2000Hz) |
| MTTF[years] [years] | 136 |
| UL approval | UL approval no.; I038; File number UL; E174189 |
| UL approval no. | I038 |
| File number UL | E174189 |
| Pressure Equipment Directive | can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 939 |
| Housing | rectangular |
| Inlet pipe length | 5 x DN |
| Outlet pipe length | 1 x DN |
| Dimensions[mm] [mm] | 220 x 64 x 92.2 |
| Materials | housing: stainless steel (316L/1.4404); connector: PEI, FKM |
| Materials (wetted parts) | Pipe section: stainless steel (316L/1.4435); Process connection: stainless steel (316L/1.4404) |
| Nominal diameter | DN50 (2“) |
| Process connection | Clamp 2" DIN 32676 series C (ASME BPE) |
| Process connection suitable for pipe standard | 2" / Ø 50,8 mm x 1,65 mm; (DIN 11866 series C); (DIN EN 10357 Series D) |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.4 µm (16 µin); Rz = 4 µm (157 µin) |
Displays / operating elements
| Display | operating status; 1 x LED, green |
| operating status | 1 x LED, green |
Accessories
| Items supplied | package insert |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range; pulse and totaliser signal are only available for one of the two outputs; the specified surface characteristics Ra/Rz of the wetted surfaces do not apply to the weld seam. |
| Pack quantity | 1 pcs. |
Electrical connection - plug
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
