متاح عند الطلب
IFM SM7621
رقم القطعة (MPN): SM7621 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Magnetic-inductive volumetric flow meters |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن SM7621؟
SM7621 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام SM7621 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـSM7621 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـSM7621، حسب التوفر والوجهة.
Precise measurement of flow, consumption and medium temperature High accuracy, repeatability and measurement dynamics With switching output, analogue output and pulse output Clearly readable colour display with red/green colour change No inlet and output pipe lengths required Convenient operation via buttons or parameter setting via IO-Link
المواصفات
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | 0.1...75 l/min; 0.006...4.5 m³/h; 1.2...1190 gph; 0.02...19.82 gpm |
| 0.1...75 l/min | 0.006...4.5 m³/h |
| Process connection | threaded connection 3/4" NPT internal thread DN20 |
Application
| Special feature | Gold-plated contacts |
| Media | conductive liquids; water; hydrous media |
| Note on media | conductivity: ≥ 20 µS/cm; viscosity: < 70 mm²/s (40 °C) |
| Medium temperature[°F] [°F] | -4...194 |
| Pressure rating | 16 bar; 1.6 MPa |
| 16 bar | 1.6 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | 5 |
| Measuring principle | magnetic-inductive |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Inputs
| Inputs | counter reset |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; pulse signal; IO-Link; frequency signal; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20; (scalable) |
| Max. load[Ω] [Ω] | 500 |
| Pulse output | flow rate meter |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | 0.1...75 l/min; 0.006...4.5 m³/h; 1.2...1190 gph; 0.02...19.82 gpm |
| 0.1...75 l/min | 0.006...4.5 m³/h |
| Display range | -90...90 l/min; -5.4...5.4 m³/h; -1426.8...1426.8 gph; -23.78...23.78 gpm |
| -90...90 l/min | -5.4...5.4 m³/h |
| Resolution | 0.1 l/min; 0.006 m³/h; 0.6 gph; 0.01 gpm |
| 0.1 l/min | 0.006 m³/h |
| Set point SP | 0.5...75 l/min; 0.03...4.5 m³/h; 8.4...1189 gph; 0.14...19.81 gpm |
| 0.5...75 l/min | 0.03...4.5 m³/h |
| Reset point rP | 0.1...74.6 l/min; 0.006...4.48 m³/h; 1.2...1183 gph; 0.03...19.71 gpm |
| 0.1...74.6 l/min | 0.006...4.48 m³/h |
| Analogue start point ASP | 0...59.9 l/min; 0...3.6 m³/h; 0...950 gph; 0...15.82 gpm |
| 0...59.9 l/min | 0...3.6 m³/h |
| Analogue end point AEP | 15.1...75 l/min; 0.9...4.5 m³/h; 240...1189 gph; 3.99...19.81 gpm |
| 15.1...75 l/min | 0.9...4.5 m³/h |
| Low flow cut-off LFC | 0.1...3.8 l/min; 0.006...0.23 m³/h; 1.8...59.4 gph; 0.03...0.99 gpm |
| 0.1...3.8 l/min | 0.006...0.23 m³/h |
| Frequency end point, FEP | 15.1...75 l/min; 0.9...4.5 m³/h; 240...1189 gph; 3.99...19.81 gpm |
| Frequency at the end point FRP[Hz] [Hz] | 1...10000 |
| Pulse length[s] [s] | 0.003...2 |
| Pulse value | 0.01...99990000 I |
| Measuring range[°F] [°F] | -4...194 |
| Display range[°F] [°F] | -43.6...233.6 |
| Resolution[°F] [°F] | 0.1 |
| Set point SP[°F] [°F] | -3.3...194 |
| Reset point rP[°F] [°F] | -4...193.3 |
| Analogue start point[°F] [°F] | -4...154.4 |
| Analogue end point[°F] [°F] | 35.6...194 |
| In steps of[°F] [°F] | 0.1 |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (0,8 % MW + 0,2 % MEW) |
| Repeatability | ± 0,2 % MEW |
| Accuracy[K] [K] | ± 2,5 (Q > 5 % MEW) |
Response times
| Start-up delay[s] [s] | 0...50 |
| Response time[s] [s] | 15; (Q > 10 % MEW, T09) |
| Damping process value dAP[s] [s] | 0...5 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; frequency output; current/pulse output; start-up delay; display can be deactivated; Display unit |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Common - I&D; Identification and Diagnosis; Function; Measurement data, standard resolution |
| Common - I&D | Identification and Diagnosis |
| Function | Measurement data, standard resolution |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 3 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 8 |
| Supported DeviceIDs | default; 958 |
| default | 958 |
Operating conditions
| Ambient temperature[°F] [°F] | -4...140 |
| Storage temperature[°F] [°F] | -13...176 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 60947-5-9 |
| Shock resistance | DIN IEC 68-2-27; 20 g (11 ms) |
| DIN IEC 68-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN IEC 68-2-6:; 5 g (10...2000 Hz) |
| DIN IEC 68-2-6: | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 114 |
| UL approval | UL approval no.; I014; File number UL; E174189 |
| UL approval no. | I014 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 848.9 |
| Housing | rectangular |
| Dimensions[mm] [mm] | 110 x 48 x 73 |
| Materials | stainless steel (316/1.4408); stainless steel (316L/1.4404); PC; PBT+PC-GF30 |
| Materials (wetted parts) | stainless steel (316L/1.4404); PEEK; carbon fibre PEEK; FKM |
| Process connection | threaded connection 3/4" NPT internal thread DN20 |
Displays / operating elements
| Display | colour display 1,44", 128 x 128 pixels; 2 x LED, yellow |
Remarks
| Remarks | MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
