متاح عند الطلب
IFM SBZ224
رقم القطعة (MPN): SBZ224 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Mechatronic flow meters in high-pressure applications |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن SBZ224؟
SBZ224 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام SBZ224 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـSBZ224 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـSBZ224، حسب التوفر والوجهة.
Robust housing with very high pressure rating Resistant to cleaning agents thanks to stainless steel components Flexible use thanks to IO-Link, analogue, switching and frequency output Integrated temperature sensor saves hardware costs Convenient operation via buttons or parameter setting via IO-Link IO-Link enables documentation of cleaning operations
المواصفات
Product characteristics
| Measuring range | 1...50 l/min; 0.06...3 m³/h; 16...793 gph; 0.26...13.2 gpm |
| 1...50 l/min | 0.06...3 m³/h |
| Process connection | threaded connection G 1/2 internal thread |
Application
| Special feature | Gold-plated contacts |
| Media | Liquids; water; glycol solutions; coolants |
| Medium temperature[°C] [°C] | -10...100 |
| Pressure rating | 200 bar; 20 MPa |
| 200 bar | 20 MPa |
Electrical data
| Operating voltage[V] [V] | 18...30 DC; (to SELV/PELV) |
| Current consumption[mA] [mA] | < 50 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 3 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; frequency signal; IO-Link |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Max. current load per output[mA] [mA] | 150; (200: ...60 °C; Ambient temperature; 250: ...40 °C; Ambient temperature) |
| Analogue current output[mA] [mA] | 4...20 |
| Max. load[Ω] [Ω] | 500 |
| Short-circuit protection | yes |
| Overload protection | yes |
| Frequency of the output[Hz] [Hz] | 0...10000 |
Measuring/setting range
| Measuring range | -10...100 °C; 14...212 °F |
| 1...50 l/min | 0.06...3 m³/h |
| Display range | -32...122 °C; -25.6...251.6 °F |
| 0...60 l/min | 0...3.6 m³/h |
| Resolution | 0.1 °C; 0.1 °F |
| 0.01 l/min | 0.001 m³/h |
| Set point SP | -9.3...100 °C; 15.2...212 °F |
| 0.35...50 l/min | 0.02...3 m³/h |
| Reset point rP | -10...99.3 °C; 14...210.8 °F |
| 0...49.65 l/min | 0...2.98 m³/h |
| Frequency end point, FEP | 12...100 °C; 53.6...212 °F |
| 3.35...50 l/min | 0.2...3 m³/h |
| In steps of | 0.1 °C; 0.2 °F |
| 0.05 l/min | 0.005 m³/h |
| Frequency at the end point FRP[Hz] [Hz] | 10...10000 |
| In steps of[Hz] [Hz] | 10 |
| Measuring dynamics | 1:50 |
| -10...100 °C | 14...212 °F |
| -32...122 °C | -25.6...251.6 °F |
| 0.1 °C | 0.2 °F |
| -9.3...100 °C | 15.2...212 °F |
| -10...99.3 °C | 14...210.8 °F |
| Frequency start point, FSP | -10...78 °C; 14...172.4 °F |
| -10...78 °C | 14...172.4 °F |
| 12...100 °C | 53.6...212 °F |
Accuracy / deviations
| Accuracy (in the measuring range) | ± (4 % MW + 1 % MEW); (Q > 1 l/min; medium and operating temperature: + 22 °C ± 4K; Installation position upright) |
| Repeatability | ± 1 % MEW |
| Temperature drift | 0,029 °C / K |
| Accuracy[K] [K] | 3 K (25 °C; Q > 1 l/min) |
Response times
| Response time[s] [s] | 0.01 |
| Damping process value dAP[s] [s] | 0...5 |
| In steps of[s] [s] | 0.1 |
| Damping for the analogue output dAA[s] [s] | 0...5 |
| Dynamic response T05 / T09[s] [s] | T09 = 120 (Q > 1 l/min) |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; current/frequency output; damping for the switching output / analogue output; display can be rotated and switched off; standard unit of measurement; process value colour; calibration factor |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 CDV |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 3.2 |
| Supported DeviceIDs | default; 1447 |
| default | 1447 |
Operating conditions
| Ambient temperature[°C] [°C] | 0...60 |
| Note on ambient temperature | medium temperature < 80 °C; medium temperature < 100 °C: 0...40 °C |
| Storage temperature[°C] [°C] | -15...80 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 20 g (11 ms) |
| DIN EN 60068-2-27 | 20 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 5 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 5 g (10...2000 Hz) |
| MTTF[years] [years] | 170 |
| Pressure Equipment Directive | Sound engineering practice |
Mechanical data
| Weight[g] [g] | 1734.3 |
| Housing | rectangular |
| Dimensions[mm] [mm] | 175.5 x 59 x 39 |
| Materials | stainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | stainless steel (316 / 1.4401); stainless steel (316L/1.4404); O-ring: FKM |
| Process connection | threaded connection G 1/2 internal thread |
| Switching cycles mechanical | 10 million |
Displays / operating elements
| Display | Display unit; 6 x LED, green; switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green alternating indication 4-digit; programming; alphanumeric display, 4-digit |
| Display unit | 6 x LED, green |
| switching status | 2 x LED, yellow |
| measured values | alphanumeric display, red/green alternating indication 4-digit |
| programming | alphanumeric display, 4-digit |
Remarks
| Remarks | Recommendation: use a 200-micron filter.; All data refer to water (20 °C).; Installation position upright; MW = measured value; MEW = Final value of the measuring range |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
