متاح عند الطلب
IFM PV7809
رقم القطعة (MPN): PV7809 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Two switching outputs |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن PV7809؟
PV7809 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام PV7809 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـPV7809 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـPV7809، حسب التوفر والوجهة.
Particularly compact housing for use where space is restricted Very high overpressure and vacuum resistance Robust stainless steel housing with high shock and vibration resistance Lifespan of more than 60 million pressure cycles Two programmable switching outputs, one of them with IO-Link communication interface
المواصفات
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2 |
| Measuring range | -1...1 bar; -1000...1000 mbar; -14.5...14.5 psi; -100...100 kPa; -0.1...0.1 MPa |
| -1...1 bar | -1000...1000 mbar |
| Process connection | threaded connection G 1/8 external thread DIN EN ISO 1179-2 internal thread:M5 |
Application
| Measuring element | metallic thin film cell |
| Application | for industrial applications |
| Media | liquids and gases |
| Medium temperature[°C] [°C] | -40...90 |
| Min. burst pressure | 200 bar; 2900 psi; 20 MPa |
| 200 bar | 2900 psi |
| Pressure rating | 15 bar; 217 psi; 1.5 MPa |
| 15 bar | 217 psi |
| Note on pressure rating | static |
| Vacuum resistance | -1000 mbar; -0.1 MPa |
| -1000 mbar | -0.1 MPa |
| Type of pressure | relative pressure; vacuum |
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
| Current consumption[mA] [mA] | < 15 |
| Min. insulation resistance[MΩ] [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 60 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 100 |
| Switching frequency DC[Hz] [Hz] | < 170 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | -1...1 bar; -1000...1000 mbar; -14.5...14.5 psi; -100...100 kPa; -0.1...0.1 MPa |
| -1...1 bar | -1000...1000 mbar |
| Set point SP | -0.98...1 bar; -980...1000 mbar; -14.2...14.5 psi; -98...100 kPa; -0.098...0.1 MPa |
| -0.98...1 bar | -980...1000 mbar |
| Reset point rP | -0.99...0.99 bar; -990...990 mbar; -14.4...14.4 psi; -99...99 kPa; -0.099...0.099 MPa |
| -0.99...0.99 bar | -990...990 mbar |
| In steps of | 0.001 bar; 1 mbar; 0.1 psi; 0.1 kPa; 0.0001 MPa |
| 0.001 bar | 1 mbar |
| Factory setting | SP1 = -500 mbar; rP1 = -540 mbar; ou1 = Hno;; SP2 = 500 mbar; rP2 = 460 mbar; ou2 = Hno;; dS1/dS2 = 0 ms; dr1/dr2 = 0 ms; coF = 0 %; P-n = PnP; dAP= 60 ms |
| SP1 = -500 mbar | rP1 = -540 mbar |
| SP2 = 500 mbar | rP2 = 460 mbar |
| dS1/dS2 = 0 ms | dr1/dr2 = 0 ms |
| coF = 0 % | P-n = PnP |
Accuracy / deviations
| Switch point accuracy[% of the span] [% of the span] | < ± 1,5 (nach DIN EN 61298-2) |
| Repeatability[% of the span] [% of the span] | < ± 0,15; (with temperature fluctuations < 10 K) |
| Characteristics deviation[% of the span] [% of the span] | < ± 1,5; (linearity incl. hysteresis and repeatability, limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation[% of the span] [% of the span] | < ± 0,2 (BFSL) / < ± 0,4 (LS) |
| Zero-point stabilisation[% of the span] [% of the span] | IO-Link,; 0; (see operating instructions zero-point behaviour); switching output; 0,75 |
| IO-Link, | 0; (see operating instructions zero-point behaviour) |
| switching output | 0,75 |
| Hysteresis deviation[% of the span] [% of the span] | < ± 0,4 |
| Long-term stability[% of the span] [% of the span] | < ± 0,2; (per 6 months) |
| Temperature coefficient zero point[% of the span / 10 K] [% of the span / 10 K] | < 0,3 (-25...90 °C) |
| Temperature coefficient span[% of the span / 10 K] [% of the span / 10 K] | < 0,2 (-25...90 °C) |
Response times
| Response time[ms] [ms] | < 3 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 0; Generic Profiled Sensor; Function; Device identification; Function; Process data variable; Function; Device diagnosis |
| Smart Sensor - SSP 0 | Generic Profiled Sensor |
| Function | Device diagnosis |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 2 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 5 |
| Supported DeviceIDs | default; 1830 |
| default | 1830 |
Operating conditions
| Ambient temperature[°C] [°C] | -40...90 |
| Storage temperature[°C] [°C] | -40...100 |
| Protection | IP 67; IP 69K |
Tests / approvals
| EMC | DIN EN 61326-1 |
| Shock resistance | DIN EN 60068-2-27; 500 g (1 ms) |
| DIN EN 60068-2-27 | 500 g (1 ms) |
| Vibration resistance | DIN EN 60068-2-6; 20 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF[years] [years] | 667 |
| UL approval | UL approval no.; J015; File number UL; E174189 |
| UL approval no. | J015 |
| File number UL | E174189 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight[g] [g] | 54.3 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 19 / L = 66 |
| Materials | Process connection , measuring cell: stainless steel (630/1.4542/17-4 PH); M12-plug: stainless steel (316L/1.4404); M12-plug: acrylate, PEI; ventilation diaphragm: PTFE |
| Materials (wetted parts) | Process connection , measuring cell: stainless steel (630/1.4542/17-4 PH); Sealing: FKM |
| Min. pressure cycles | 60 million; (at 1.2 times nominal pressure) |
| Tightening torque[Nm] [Nm] | 20...25; (recommended tightening torque; depends on the lubrication, the seal and the pressure load) |
| Process connection | threaded connection G 1/8 external thread DIN EN ISO 1179-2 internal thread:M5 |
| Process connection sealing | FKM (DIN EN ISO 1179-2) |
| Restrictor element integrated | no |
Remarks
| Remarks | BFSL = Best Fit Straight Line; LS = limit value setting |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
