متاح عند الطلب

IFM PN2015

رقم القطعة (MPN): PN2015 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر

يرد شخص حقيقي، عادةً خلال يوم عمل واحد — راجع سياسة الخصوصية.

ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر

معلومات سريعة

التوفريُؤكَّد عند الطلب
الفئةType PN / PE with digital display
الضمان12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)

الشحن والتوفر

متى يمكن شحن PN2015؟

PN2015 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.

هل يمكنني استلام PN2015 شخصيًا؟

قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.

هل التوصيل السريع متاح؟

نعم — اذكر ذلك عند طلب عرض سعر لـPN2015 وسنُدرج خيارات التوصيل السريع في ردنا.

مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟

في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـPN2015، حسب التوفر والوجهة.

Two switching outputs, one of them programmable as IO-Link and one as analogue output Red/green display for clear identification of the acceptable range The process connection can be rotated for optimum alignment With long-term stability thanks to high overload protection Robust design for use in harsh industrial environments Convenient operation via buttons or parameter setting via IO-Link

المواصفات

Product characteristics

Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1
Measuring range-1...6 bar; -14.5...87 psi; -100...600 kPa
-1...6 bar-14.5...87 psi
Process connectionthreaded connection G 1/4 internal thread (DIN EN ISO 1179-2)

Application

Special featureGold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Applicationfor industrial applications
Medialiquids and gases
Medium temperature[°C] [°C]-25...80
Min. burst pressure100 bar; 1500 psi; 10000 kPa
100 bar1500 psi
Pressure rating40 bar; 600 psi; 4000 kPa
40 bar600 psi
Vacuum resistance-1000 mbar; -0.1 MPa
-1000 mbar-0.1 MPa
Type of pressurerelative pressure; vacuum

Electrical data

Operating voltage[V] [V]18...30 DC; (to SELV/PELV)
Current consumption[mA] [mA]< 35
Min. insulation resistance[MΩ] [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time[s] [s]0.3
Integrated watchdogyes

Inputs / outputs

Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs2
Output signalswitching signal; analogue signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC[V] [V]2
Permanent current rating of switching output DC[mA] [mA]250
Switching frequency DC[Hz] [Hz]< 500
Number of analogue outputs1
Analogue current output[mA] [mA]4...20; (scalable 1:5)
Max. load[Ω] [Ω]500
Analogue voltage output[V] [V]0...10; (scalable 1:5)
Min. load resistance[Ω] [Ω]2000
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes

Measuring/setting range

Measuring range-1...6 bar; -14.5...87 psi; -100...600 kPa
-1...6 bar-14.5...87 psi
Set point SP-0.95...6 bar; -13.8...87 psi; -95...600 kPa
-0.95...6 bar-13.8...87 psi
Reset point rP-0.98...5.97 bar; -14.2...86.6 psi; -98...597 kPa
-0.98...5.97 bar-14.2...86.6 psi
Analogue start point-1...4.8 bar; -14.5...69.6 psi; -100...480 kPa
-1...4.8 bar-14.5...69.6 psi
Analogue end point0.2...6 bar; 2.9...87 psi; 20...600 kPa
0.2...6 bar2.9...87 psi
Min. difference between SP and rP0.03 bar; 0.5 psi; 3 kPa
0.03 bar0.5 psi
In steps of0.001 bar; 0.1 psi; 1 kPa
0.001 bar0.1 psi

Accuracy / deviations

Switch point accuracy[% of the span] [% of the span]< ± 0,4; (Turn down 1:1)
Repeatability[% of the span] [% of the span]< ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1)
Characteristics deviation[% of the span] [% of the span]< ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation[% of the span] [% of the span]< ± 0,1; (Turn down 1:1)
Long-term stability[% of the span] [% of the span]< ± 0,05; (Turn down 1:1; per 6 months)
Temperature coefficient zero point[% of the span / 10 K] [% of the span / 10 K]< ± 0,2; (-0...80 °C)
Temperature coefficient span[% of the span / 10 K] [% of the span / 10 K]< ± 0,2; (-0...80 °C)
Notes on the accuracy / deviationswitch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1%

Response times

Response time[ms] [ms]< 1.5
Delay time programmable dS, dr[s] [s]0...50
Damping process value dAP[s] [s]0...4
Damping for the analogue output dAA[s] [s]0...4
Max. response time analogue output[ms] [ms]3

Software / programming

Parameter setting optionshysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output

Interfaces

Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor - SSP 3.1; Measuring Sensor; Common - I&D; Identification and Diagnosis
Smart Sensor - SSP 3.1Measuring Sensor
Common - I&DIdentification and Diagnosis
SIO modeyes
Required master port typeA; (when pin 2 not connected: B)
Min. process cycle time[ms] [ms]3
IO-Link resolution pressure[bar] [bar]0.002
IO-Link process data (cyclical)pressure; 16; device status; 4; binary switching information; 2
pressure16
device status4
binary switching information2
IO-Link functions (acyclical)application specific tag
Supported DeviceIDsdefault; 1203
default1203
NoteFor further information please see the IODD PDF file under "Downloads"

Operating conditions

Ambient temperature[°C] [°C]-25...80
Storage temperature[°C] [°C]-40...100
ProtectionIP 65; IP 67

Tests / approvals

EMCDIN EN 61000-6-2; DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-27; 50 g (11 ms)
DIN EN 60068-2-2750 g (11 ms)
Vibration resistanceDIN EN 60068-2-6; 20 g (10...2000 Hz)
DIN EN 60068-2-620 g (10...2000 Hz)
MTTF[years] [years]167
UL approvalUL approval no.; J012; File number UL; E174189
UL approval no.J012
File number ULE174189
Pressure Equipment DirectiveSound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight[g] [g]246.1
Housingcylindrical
Dimensions[mm] [mm]Ø 34 / L = 90.7
Materialsstainless steel (316L/1.4404); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts)stainless steel (316L/1.4404); Al2O3 (ceramics); FKM
Min. pressure cycles100 million
Tightening torque[Nm] [Nm]25...35; (recommended tightening torque; depends on the lubrication, the seal and the pressure load)
Process connectionthreaded connection G 1/4 internal thread (DIN EN ISO 1179-2)
Restrictor element integratedno (can be retrofitted)

Displays / operating elements

DisplayDisplay unit; 3 x LED, green (bar, psi, MPa); switching status; 2 x LED, yellow; measured values; alphanumeric display, red/green 4-digit
Display unit3 x LED, green (bar, psi, MPa)
switching status2 x LED, yellow
measured valuesalphanumeric display, red/green 4-digit

Remarks

Pack quantity1 pcs.

Electrical connection

Connector1 x M12; coding: A; Contacts: gold-plated
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم

المزيد من قطع IFM

IFM O8H205متاح عند الطلبIFM O8H205
رقم القطعة (MPN): O8H205 · IFM
السعر عند الطلب
طلب عرض سعر
IFM O8H206متاح عند الطلبIFM O8H206
رقم القطعة (MPN): O8H206 · IFM
السعر عند الطلب
طلب عرض سعر
IFM O8H207متاح عند الطلبIFM O8H207
رقم القطعة (MPN): O8H207 · IFM
السعر عند الطلب
طلب عرض سعر
IFM O8H202متاح عند الطلبIFM O8H202
رقم القطعة (MPN): O8H202 · IFM
السعر عند الطلب
طلب عرض سعر