متاح عند الطلب
IFM PI2209
رقم القطعة (MPN): PI2209 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Use in process technology at high temperatures |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن PI2209؟
PI2209 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام PI2209 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـPI2209 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـPI2209، حسب التوفر والوجهة.
For use in high temperatures in the food and beverage industry Robust stainless steel housing with hygienic front-flush design With two-wire and three-wire connection technology Reduced wiring complexity when operated as two-wire current loop Integrated clamp diaphragm seal with stainless steel membrane Convenient operation via buttons or parameter setting via IO-Link
المواصفات
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
| Measuring range | -1000...1000 mbar; -14.5...14.5 psi; -100...100 kPa |
| -1000...1000 mbar | -14.5...14.5 psi |
| Process connection | Clamp DN40 (1,5") DIN 32676 (ISO 2852) |
Application
| Special feature | Gold-plated contacts |
| Application | flush mountable for the food and beverage industry |
| Media | viscous media and liquids with suspended particles; liquids and gases |
| Medium temperature[°C] [°C] | -20...200; (-20...90 < 0 bar) |
| Min. burst pressure | 30000 mbar; 435 psi; 3000 kPa |
| 30000 mbar | 435 psi |
| Pressure rating | 10000 mbar; 145 psi; 1000 kPa |
| 10000 mbar | 145 psi |
| Type of pressure | relative pressure; vacuum |
Electrical data
| Min. insulation resistance[MΩ] [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Integrated watchdog | yes |
| Operating voltage[V] [V] | 18...32 DC |
| Current consumption[mA] [mA] | < 45 |
| Power-on delay time[s] [s] | 0.5 |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20, invertible; (scalable) |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
| Max. load[Ω] [Ω] | (Ub - 10 V) / 20 mA |
| Max. voltage drop switching output DC[V] [V] | 2 |
| Permanent current rating of switching output DC[mA] [mA] | 250 |
| Switching frequency DC[Hz] [Hz] | 125 |
Measuring/setting range
| Measuring range | -1000...1000 mbar; -14.5...14.5 psi; -100...100 kPa |
| -1000...1000 mbar | -14.5...14.5 psi |
| Set point SP | -998...1000 mbar; -14.45...14.5 psi; -99.8...100 kPa |
| -998...1000 mbar | -14.45...14.5 psi |
| Reset point rP | -1000...998 mbar; -14.5...14.45 psi; -100...99.8 kPa |
| -1000...998 mbar | -14.5...14.45 psi |
| Analogue start point | -1000...500 mbar; -14.5...7.25 psi; -100...50 kPa |
| -1000...500 mbar | -14.5...7.25 psi |
| Analogue end point | -500...1000 mbar; -7.25...14.5 psi; -50...100 kPa |
| -500...1000 mbar | -7.25...14.5 psi |
| In steps of | 1 mbar; 0.05 psi; 0.1 kPa |
| 1 mbar | 0.05 psi |
| Factory setting | SP1 = -500 mbar; rP1 = -540 mbar; SP2 = 500 mbar; rP2 = 460 mbar; ASP = -1000 mbar; AEP = 1000 mbar |
Accuracy / deviations
| Switch point accuracy[% of the span] [% of the span] | < ± 0,2; (Turn down 1:1) |
| Repeatability[% of the span] [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation[% of the span] [% of the span] | < ± 0,2; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) |
| Linearity deviation[% of the span] [% of the span] | < ± 0,15; (Turn down 1:1) |
| Zero-point stabilisation[% of the span] [% of the span] | IO-Link, analogue output; 0,15; display, switching output; 0,2 |
| IO-Link, analogue output | 0,15 |
| display, switching output | 0,2 |
| Hysteresis deviation[% of the span] [% of the span] | < ± 0,15; (Turn down 1:1) |
| Long-term stability[% of the span] [% of the span] | < ± 0,1; (Turn down 1:1; per year) |
| Temperature coefficient zero point[% of the span / 10 K] [% of the span / 10 K] | < ± 0,3; (0...200 °C) |
| Temperature coefficient span[% of the span / 10 K] [% of the span / 10 K] | < ± 0,15; (0...200 °C) |
Response times
| Damping process value dAP[s] [s] | 0...30 |
| Damping for the analogue output dAA[s] [s] | 0.01...99.99 |
| Step response time analogue output[ms] [ms] | 7 |
| Min. response time of switching output (dAP)[ms] [ms] | 3 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.0 |
| SDCI standard | IO-Link Communication Specification, Version 1.0, January 2009, Ordner No: 10.002 |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 2.3 |
| Supported DeviceIDs | default; 258 |
| default | 258 |
Operating conditions
| Ambient temperature[°C] [°C] | -25...65 |
| Note on ambient temperature | Medium temperature: ≤ 200 °C |
| Storage temperature[°C] [°C] | -25...100 |
| Protection | IP 67; IP 68; IP 69K |
Tests / approvals
| EMC | DIN EN 61000-6-2; DIN EN 61000-6-3 |
| Shock resistance | DIN EN 60068-2-27; 50 g (11 ms) |
| DIN EN 60068-2-27 | 50 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-6; 20 g (10...2000 Hz) |
| DIN EN 60068-2-6 | 20 g (10...2000 Hz) |
| MTTF[years] [years] | 141 |
| Note on approval | Including free 6-point calibration certificate. |
Mechanical data
| Weight[g] [g] | 1074.4 |
| Housing | cylindrical |
| Dimensions[mm] [mm] | Ø 50 / L = 163 |
| Materials | stainless steel (316L/1.4404); stainless steel (316L/1.4435); PBT; PEI; PFA |
| Materials (wetted parts) | stainless steel (316L/1.4435) |
| Min. pressure cycles | 10 million |
| Process connection | Clamp DN40 (1,5") DIN 32676 (ISO 2852) |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.38 µm |
| Fill fluid for pressure transmission | NEOBEE (food grade, FDA compliant) |
| Diaphragm diameter[mm] [mm] | 34 |
Displays / operating elements
| Display | Display unit; LED, green; switching status; LED, yellow; function display; alphanumeric display, 4-digit; measured values; alphanumeric display, 4-digit |
| Display unit | mbar; kPa; psi; inH2O; mWS; % of the span |
| switching status | LED, yellow |
| function display | alphanumeric display, 4-digit |
| measured values | alphanumeric display, 4-digit |
Remarks
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
