متاح عند الطلب
IFM LW2120
رقم القطعة (MPN): LW2120 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Non-contact level measurement |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن LW2120؟
LW2120 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام LW2120 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـLW2120 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـLW2120، حسب التوفر والوجهة.
80 GHz radar enables level measurement with millimetre precision of up to 10 metres Non-contact measuring principle: no malfunctions due to deposits or wear Direct measurement or through non-metallic walls Simple installation and maintenance-free operation Remote sensor parameter setting and level monitoring via connection to the IT system Intuitive set-up and visualisation of the measured data using the ifm Vision Assistant software
المواصفات
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
| Process connection | G 1 Aseptoflex Vario |
Application
| Special feature | Gold-plated contacts |
| Dielectric constant of the medium | ≥ 2 |
| Recommended media | water; hydrous media |
| Process temperature[°C] [°C] | -40...150; (see diagram and note under remarks) |
| Maximum speed of the change of level[mm/s] [mm/s] | 200 |
| Pressure rating[bar] [bar] | 8 |
| Note on pressure rating | 0 bar at medium temperature < - 20 C |
| Vacuum resistance[mbar] [mbar] | -1000 |
| MAWP for applications according to CRN[bar] [bar] | 8 |
| Radio approval for | EU/RED; Great Britain; South Korea; USA; Canada; Australia; New Zealand; Vietnam; Singapore; Argentina; Brazil; Japan; Taiwan; South Africa; Mexico |
| Note on radio approval | The list of countries applying the European Radio Equipment Directive 2014/53/EU (RED) can be found under “Downloads”. |
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
| Current consumption[mA] [mA] | < 80 |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time[s] [s] | < 15 |
| Measuring principle | FMCW (80 GHz technology); frequency range 77 - 81 GHz |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 1; Number of analogue outputs: 1 |
Outputs
| Total number of outputs | 2 |
| Output signal | switching signal; analogue signal; IO-Link |
| Electrical design | PNP/NPN |
| Number of digital outputs | 1; (2 parameterisable) |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC[V] [V] | 2.5 |
| Permanent current rating of switching output DC[mA] [mA] | 50 |
| Number of analogue outputs | 1 |
| Analogue current output[mA] [mA] | 4...20, invertible; (scalable) |
| Max. load[Ω] [Ω] | 43,5 * (Ub – 18) + 600 Ω |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range[m] [m] | 10; (see diagram:) |
| Sampling rate[Hz] [Hz] | > 3 |
Accuracy / deviations
| Accuracy | ± 2 mm |
| Resolution[mm] [mm] | 1 |
| Zero signal (current)[mA] [mA] | 3.8 |
| Full signal (current)[mA] [mA] | 20.5 |
| Temperature drift per 10 K | ± 1 mm |
Response times
| Response time[ms] [ms] | 330 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| Profiles | Smart Sensor - SSP 3.1; Measuring Sensor; Common - I&D; Identification and Diagnosis; Function; Multiple switching signal |
| Smart Sensor - SSP 3.1 | Measuring Sensor |
| Common - I&D | Identification and Diagnosis |
| Function | Multiple switching signal |
| SIO mode | yes |
| Required master port type | A |
| Process data analogue | 1 |
| Process data binary | 2 |
| Min. process cycle time[ms] [ms] | 6 |
| Supported DeviceIDs | default; 1611 |
| default | 1611 |
Operating conditions
| Ambient temperature[°C] [°C] | -40...80 |
| Note on ambient temperature | see diagram: |
| Storage temperature[°C] [°C] | -40...90 |
| Protection | IP 68; IP 69K |
Tests / approvals
| EMC | DIN EN 61326-1; group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs) |
| DIN EN 61326-1 | group 1: Class A (IO-Link active); B (IO-Link not active, with analogue and switching outputs) |
| Shock resistance | DIN EN 60068-2-27; 50 g (11 ms) / 20 g (6 ms) |
| DIN EN 60068-2-27 | 50 g (11 ms) / 20 g (6 ms) |
| Vibration resistance | IEC 61298-3; 2 g (10...1000 Hz) |
| IEC 61298-3 | 2 g (10...1000 Hz) |
| MTTF[years] [years] | 330 |
Mechanical data
| Weight[g] [g] | 723.8 |
| Materials | stainless steel (316L/1.4404); PA; FKM; FVMQ |
| Materials (wetted parts) | PTFE; EPDM; FVMQ when used without Aseptoflex Vario adapter |
| Process connection | G 1 Aseptoflex Vario |
| Surface characteristics Ra/Rz of the wetted parts | Ra < 0.76 µm |
Remarks
| Notes | An IO-Link master and a parameter setting software (e.g. moneo or LR DEVICE) are required for initial set-up.; For high process temperatures: The temperature at the process connection is decisive. The actual medium temperature may be higher.; use according to FDA compliance only in conjunction with a hygienic adapter |
| Pack quantity | 1 pcs. |
Electrical connection
| Connector | 1 x M12; coding: A; Contacts: gold-plated |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
