متاح عند الطلب
IFM AL2507
رقم القطعة (MPN): AL2507 · العلامة التجارية: IFM
السعر عند الطلب
طلب عرض سعر
ضمان 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد)
إرجاع خلال 30 يومًا، دون رسوم إعادة تخزين على القطع غير المستخدمة
يُشحن عبر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | IO-Link - M12 modules |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن AL2507؟
AL2507 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام AL2507 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـAL2507 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـAL2507، حسب التوفر والوجهة.
Separate power supply up to 16 A total current Current rating per port up to 2 A Use in safety circuits Connection of analogue signals 4...20 mA, 0...10 V Extension of IO-Link masters with digital inputs and outputs, as well as analogue inputs
المواصفات
Electrical data
| Operating voltage[V] [V] | 18...30 DC |
| Current consumption[mA] [mA] | 50; (US) |
| Protection class | III |
| Additional voltage supply[V] [V] | 18...30 DC; (UA) |
| Max. current consumption from additional supply[mA] [mA] | 16000; (UA) |
Inputs / outputs
| Total number of inputs and outputs | 16 |
| Number of inputs and outputs | Number of digital inputs: 16; Number of analogue inputs: 8; Number of frequency inputs: 2; Number of digital outputs: 16 |
Inputs
| Number of frequency inputs | 2 |
| Number of digital inputs | 16; (parameterisable) |
| Input circuit of digital inputs | PNP; (type 3 (IEC 61131-2)) |
| Sensor supply of the inputs | AUX (UA) |
| Power supply[V] [V] | 18...30 |
| Input current High[mA] [mA] | 2...15 |
| Input current Low[mA] [mA] | 0...1.5 |
| Switching level high[V] [V] | 11...28 |
| Switching level low[V] [V] | 0...5 |
| Number of analogue inputs | 8; (parameterisable current/voltage input) |
| Analogue input (current)[mA] [mA] | 4...20 |
| Analogue input (voltage)[V] [V] | 0...10 |
| Resolution of analogue input | 16 Bit |
| Precision analogue input[%] [%] | 0,3 |
Outputs
| Number of digital outputs | 16; (parameterisable) |
| Max. current load per output[mA] [mA] | 2000 |
| Max. current load outputs total[A] [A] | 16 |
| Short-circuit protection | yes |
| Actuator supply outputs | AUX (UA) |
| Number of PWM outputs | 8; (acyclic enhanced modus) |
| Number of PWM-I outputs | 2; (acyclic enhanced modus) |
| PMW/PWM-I output | max. current PWM-I output [mA]; 2000; available factors for the controller [PID]; Kp, Ki, Kd; currently requested resolution [mA]; 1; accuracy PWM-I Ausgang [%]; 2,2; range of the PWM output pulse/pause ratio [‰]; 0...1000; switch-on time resolution ‰]; 1; PWM/PWM-I frequency range [Hz]; 20...1000; number of configurable frequencies; 2; number of PWM outputs with optional dither; 8; dither level [‰]; 1...250; dither number; 1...20 |
| max. current PWM-I output [mA] | 2000 |
| available factors for the controller [PID] | Kp, Ki, Kd |
| currently requested resolution [mA] | 1 |
| accuracy PWM-I Ausgang [%] | 2,2 |
| range of the PWM output pulse/pause ratio [‰] | 0...1000 |
| switch-on time resolution ‰] | 1 |
| PWM/PWM-I frequency range [Hz] | 20...1000 |
| number of configurable frequencies | 2 |
| number of PWM outputs with optional dither | 8 |
| dither level [‰] | 1...250 |
| dither number | 1...20 |
Measuring/setting range
| Sampling rate[Hz] [Hz] | 0...3000 |
Interfaces
| Communication interface | IO-Link |
| Transmission type | COM3 (230,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | no |
| Required master port type | A |
| Min. process cycle time[ms] [ms] | 4 |
| Supported DeviceIDs | Acyclic enhanced parametrisation; 1449; Acyclic parametrisation; 1316; Cyclic parametrisation; 1315 |
| Acyclic enhanced parametrisation | 1449 |
| Acyclic parametrisation | 1316 |
| Cyclic parametrisation | 1315 |
| Note | Parameter setting can be changed from “cyclic” to “acyclic” and “acyclic enhanced”; For further information please see the IODD PDF file under "Downloads" |
| Profiles | Common - I&D; Identification and Diagnosis |
| Common - I&D | Identification and Diagnosis |
| Function | Multiple switching signal |
Operating conditions
| Ambient temperature[°C] [°C] | -25...60 |
| Storage temperature[°C] [°C] | -25...70 |
| Max. relative air humidity[%] [%] | 90 |
| Max. height above sea level[m] [m] | 2000 |
| Protection | IP 65; IP 67; IP 69K; (operation with stainless steel protective caps: IP 69K) |
| Protection rating (NEMA 250) | 6P |
| Pollution degree | 2 |
| Chemical media | ISO 16750-5; HLP, CC, DB, DC, DD, CA; NEMA 250 5.13.1; AA |
| ISO 16750-5 | HLP, CC, DB, DC, DD, CA |
| NEMA 250 5.13.1 | AA |
Tests / approvals
| EMC | EN 61000-6-2; EN 61000-6-3; IEC 61131-9 |
| Shock resistance | DIN EN 60068-2-27 |
| Vibration resistance | DIN EN 60068-2-64; DIN EN 60068-2-6 |
Mechanical data
| Weight[g] [g] | 410.9 |
| Dimensions[mm] [mm] | 26 x 59.3 x 208 |
| Materials | housing: PA grey; socket: stainless steel (316L/1.4404) |
| Sealing material | EPDM |
| Tightening torque[Nm] [Nm] | < 0.8 |
Displays / operating elements
| Display | operation; 4x LED, green; fault; 3 x LED, red; function; 16x LED, yellow |
| operation | 4x LED, green |
| fault | 3 x LED, red |
| function | 16x LED, yellow |
Accessories
| Accessories (optional) | protective cap for M12 sockets |
Remarks
| Remarks | Using the device within a system with requirements for functional safety is possible by deactivating the actuator voltage UA without interaction.; For further information on functional safety, please refer to the operating instructions supplement under “Downloads”. |
| Pack quantity | 1 pcs. |
Electrical connection - AUX
| Connector | 1 x M12; coding: L |
Electrical connection - IO-Link
| Connector | 1 x M12; coding: A |
Electrical connection - inputs / outputs
| Connector | 8 x M12; coding: A; Sealing: EPDM |
ضمان 12 شهرًاعلى جميع المخزون الجديد
ضمان 3 أشهرعلى القطع المستعملة والمجددة
إرجاع خلال 30 يومًادون رسوم إعادة تخزين على القطع غير المستخدمة
شحن عالميتوصيل سريع وقابل للتتبع حول العالم
