On/off valve-MS9-EE
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | MS9-EE |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن MS9-EE؟
MS9-EE يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام MS9-EE شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـMS9-EE وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـMS9-EE، حسب التوفر والوجهة.
Grid dimension 90 mm , Electric 3/2-way valve for pressurising and exhausting pneumatic installations , A silencer can be attached or the exhaust air ducted at port 3 , Supply voltage 24 V DC, 110, 230 V AC , Optionally with pressure gauge and pressure sensor , With solenoid coil, without plug socket
المواصفات
Specifications
| Series | MS |
| Size | 9 |
| Grid dimension | 90 mm |
| Design | Piston gate valve |
| Type of actuation | Electric |
| Sealing principle | Soft |
| Exhaust-air function | Without flow control option |
| Manual override | Detenting, Non-detenting |
| Type of reset | Mechanical spring |
| Type of piloting | Pilot actuated |
| Valve function | 2/2-way, closed, monostable, 3/2-way, closed, monostable |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4, Prepared for G1/8, Red/green scale, Via pressure sensor, With pressure gauge, Via operational status indicator |
| Operating pressure | 3.5, 16 bar |
| lap | Overlap |
| Standard nominal flow rate (standardised to DIN 1343) | 8000, 18000 l/min |
| Standard nominal flow rate 2-3 | 13200, 14900 l/min |
| Duty cycle | 100% |
| Characteristic coil data | 230 V AC: 50 Hz, pick-up power 11.5 VA, holding power 9.1 VA, 230 V AC: 60 Hz, pick-up power 9.5 VA, holding power 6.4 VA |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| Note on materials | RoHS-compliant |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Media temperature | -10, 60 °C |
| Degree of protection | IP65 |
| Ambient temperature | -10, 60 °C |
| Approval | c UL us - Recognized (OL) |
| CE mark (see declaration of conformity) | To EU Explosion Protection Directive (ATEX), To EU Low Voltage Directive |
| UKCA marking (see declaration of conformity) | To UK EX instructions, To UK regulations for electrical equipment |
| Explosion protection certification outside the EU | EPL Db (GB), EPL Gb (GB) |
| Explosion protection | Zone 1 (UKEX), Zone 2 (ATEX), Zone 21 (UKEX), Zone 22 (ATEX) |
| ATEX category gas | II 3G |
| ATEX category dust | II 3D |
| Explosion ignition protection type for gas | Ex nA IIC T5 X Gc |
| Explosion ignition protection type for dust | Ex tc IIIC T85°C X Dc IP65 |
| Explosion ambient temperature | -10 °C <= Ta <= +50 °C |
| Type of mounting | In-line installation, With accessories |
| Mounting position | optional |
| Electrical connection | Type A, Plugs, To DIN EN 175301-803, Square design |
| Material piston slide | POM |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
المزيد من قطع Festo
مستعملFesto 560207 - HGPT-25-A-B-F Used
متاح عند الطلبPush-in connector-NPQP-D-Q6-S8-FD-P10
متاح عند الطلبPush-in T-fitting-NPQE-LT-R18-Q4-P10