Soft start valve-MS4-DE
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | MS4-DE |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
الشحن والتوفر
متى يمكن شحن MS4-DE؟
MS4-DE يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام MS4-DE شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـMS4-DE وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـMS4-DE، حسب التوفر والوجهة.
Grid dimension 40mm , 2/2-way valve for slowly pressurising pneumatic installations with electrically switchable pressure switchover point , Supply voltage 24 V DC, 110, 230 V AC , Switchable pressure switching point , For advancing the drives slowly and reliably into the initial position , For avoiding sudden and unexpected movements , Adjustable pressure build-up time
المواصفات
Specifications
| Type of actuation | Electric |
| Mounting position | optional |
| Manual override | Detenting, Non-detenting |
| Design | Piston seat |
| Type of reset | Mechanical spring |
| Type of piloting | Pilot actuated |
| Pilot air supply | Internal |
| Flow direction | Non-reversible |
| Valve function | 2/2 |
| Pressure gauge (ANALOG) or Pressure display (DIGITAL) | Prepared for G1/4, Prepared for G1/8, Via pressure sensor, With pressure gauge |
| Switching position indicator | With accessories |
| Operating pressure | 4, 14 bar |
| Standard nominal flow rate (standardised to DIN 1343) | 1000, 2000 l/min |
| Duty cycle | 100% |
| Approval | c UL us - Recognized (OL) |
| KC mark | KC-EMV |
| CE mark (see declaration of conformity) | To EU EMC Directive, To EU Explosion Protection Directive (ATEX), To EU Low Voltage Directive, In accordance with EU RoHS Directive |
| UKCA marking (see declaration of conformity) | To UK instructions for EMC, To UK EX instructions, To UK RoHS instructions, To UK regulations for electrical equipment |
| Explosion protection certification outside the EU | EPL Dc (GB), EPL Gc (GB) |
| Explosion protection | Zone 2 (ATEX), Zone 2 (UKEX), Zone 22 (ATEX), Zone 22 (UKEX) |
| ATEX category gas | II 3G |
| ATEX category dust | II 3D |
| Explosion ignition protection type for gas | Ex nA IIC T4 X Gc |
| Explosion ignition protection type for dust | Ex tc IIIC T105°C IP65 Dc X |
| Explosion ambient temperature | -10 °C <= Ta <= +60 °C |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4], Inert gases |
| Note on operating and pilot medium | Lubricated operation possible (in which case lubricated operation will always be required) |
| Corrosion resistance class CRC | 2 - Moderate corrosion stress |
| LABS (PWIS) conformity | VDMA24364-B1/B2-L |
| Suitable for use with food | See supplementary material information |
| Media temperature | -10, 60 °C |
| Degree of protection | IP65 |
| Ambient temperature | -10, 60 °C |
| Product weight | 263 g |
| Signal status display | With accessories |
| Type of mounting | In-line installation, With accessories |
| Note on materials | RoHS-compliant |
| Material seals | NBR |
| Material housing | Die-cast aluminium |
المزيد من قطع Festo
مستعملFesto 560207 - HGPT-25-A-B-F Used
متاح عند الطلبPush-in connector-NPQP-D-Q6-S8-FD-P10
متاح عند الطلبPush-in T-fitting-NPQE-LT-R18-Q4-P10