ABB PSRC85-600-70
طلب عرض سعر
معلومات سريعة
| التوفر | يُؤكَّد عند الطلب |
| الفئة | Power regeneration with variable speed drives |
| دورة الحياة | active |
| الضمان | 12 شهرًا (جديد) · 3 أشهر (مستعمل/مجدد) |
| الوزن | 2.1 kg |
الشحن والتوفر
متى يمكن شحن PSRC85-600-70؟
PSRC85-600-70 يُورَّد عند الطلب — اطلب عرض سعر وسنؤكد التوفر الدقيق ومدة الشحن لهذه الوحدة تحديدًا.
هل يمكنني استلام PSRC85-600-70 شخصيًا؟
قد يكون الاستلام الشخصي من مستودعنا في غرونينغن، هولندا ممكنًا — تواصل معنا قبل الطلب للتحقق من التوفر وترتيب موعد الاستلام.
هل التوصيل السريع متاح؟
نعم — اذكر ذلك عند طلب عرض سعر لـPSRC85-600-70 وسنُدرج خيارات التوصيل السريع في ردنا.
مصنعنا متوقف عن العمل ونحتاج هذا بشكل عاجل — هل يمكنكم المساعدة؟
في حالة عطل حرج، تواصل معنا مباشرة على +31 (0)50-7110348 أو sales@partnerplc.com — يمكننا النظر في توصيل بواسطة ساعٍ في نفس اليوم أو توصيل مخصص عاجل لـPSRC85-600-70، حسب التوفر والوجهة.
The softstarter PSRC85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSRC features a two-phase control soft start through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The PSRC softstarter range is a true plug-and-play with a fixed setting optimized for scroll compressors. PSRC is often combined with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSRC is fast and easy to install with fixed settings. Designed for scroll compressors results in less stress on the compressor reducing the maintenance cost to a minimum. The PSRC range are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are compressors.
المواصفات
Ordering
| Minimum Order Quantity | 1 piece |
| Customs Tariff Number | 85371091 |
Popular Downloads
| Data Sheet, Technical Information | 1SFC132012C0201 |
| Instructions and Manuals | 1SFC132044M0001 |
| Instructions and Manuals (Part 3) | 1SFC132060M0201 |
| CAD Dimensional Drawing | 2CDC001079B0201 |
| EPLAN Data | 9AAC172777_EPLAN |
| Wiring Diagram | N/A A |
Dimensions
| Product Net Width | 70 mm mm |
| Product Net Height | 220 mm mm |
| Product Net Depth / Length | 180 mm mm |
| Product Net Weight | 2.1 kg kg |
Technical
| Rated Operational Voltage | 208 ... 600 V AC V |
| Rated Control Supply Voltage (Us) | 100 ... 240 V AC V |
| Rated Control Circuit Voltage (Uc) | 24 V DC V |
| Rated Frequency (f) | 50/60 Hz, Main Circuit 50 / 60 Hz Hz |
| Rated Operational Power - In-Line Connection (Pe) | (230 V) 22 kW, (400 V) 45 kW, (500 V) 55 kW V |
| Rated Operational Current - In-Line Connection (Ie) | 85 A A |
| Service Factor Percentage | 100 % |
| Overload Protection | Recommended MS495 70 ... 90 |
| Integrated Electronic Overload | No |
| Starting Capacity at Maximum Rated Current Ie | 4xIe for 6s |
| Ramp Time | Fixed setting, Fixed setting |
| Initial Voltage During Start | Fixed setting |
| Step Down Voltage Special Ramp | Fixed setting |
| Current Limit Function | No |
| Switch for Inside Delta Connection | No |
| Run Signal Relay | Yes |
| By-pass Signal Relay | Yes |
| Fault Signal Relay | No |
| Overload Signal Relay | No |
| Signal Indication Completed Start Ramp (LED) | Green |
| Signal Indication Ready to Start/Standby ON (LED) | Green |
| Signal Indication Running R (LED) | Green |
| Signal Indication Ramping Up/Down (LED) | Green |
| Number of Starts Per Hour at 3.5*Ie for 7 sec. 50% ON Time 50% OFF Time | 10 |
| Communication | FiledBusPlug(Optional) |
| Degree of Protection | acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP10 |
| Terminal Type | Main Circuit: Bars |
| Connecting Capacity Main Circuit | Rigid 1 x 0.75 ... 2.5 mm² mm |
| Connecting Capacity Supply Circuit | Rigid 1 x 0.75 ... 2.5 |
| Tightening Torque | Control Circuit 0.6 N·m, Main Circuit 8 N·m, Supply Circuit 0.6 N·m m |
| Product Main Type | PSRC85 |
| Function | Soft start with voltage ramp, Soft stop with voltage ramp |
Technical UL/CSA
| Horsepower Rating UL/CSA | (200 ... 208 V AC) Three Phase 25 Hp, (220 ... 240 V AC) Three Phase 30 Hp, (440 ... 480 V AC) Three Phase 60 Hp, (550 ... 600 V AC) Three Phase 75 Hp V |
| Maximum Operating Voltage UL/CSA | Main Circuit 600 V V |
| Tightening Torque UL/CSA | Control Circuit 5.3 in·lb, Main Circuit 70.8, Supply Circuit 5.3 in·lb |
Environmental
| Ambient Air Temperature | Operation -25 ... +60 °C, Storage -40 ... +70 °C |
Material Compliance
| Conflict Minerals Reporting Template (CMRT) | 9AKK108467A5658 |
| REACH Declaration | 2CMT2022-006481 |
| RoHS Declaration | 2CMT2022-006500 |
| RoHS Information | Following EU Directive 2011/65/EU and Amendment 2015/863 July 22, 2019 |
| Toxic Substances Control Act - TSCA | 2CMT2023-006524 |
| WEEE B2C / B2B | Business To Business |
| WEEE Category | 5. Small Equipment (No External Dimension More Than 50 cm) cm |
Certificates and Declarations
| CQC Certificate | CQC2008010304295498 |
| Declaration of Conformity - CCC | 2020980304001090 |
| Declaration of Conformity - CE | 2CMT003878 |
Container Information
| Package Level 1 Width | 195 mm mm |
| Package Level 1 Depth / Length | 86 mm mm |
| Package Level 1 Height | 230 mm mm |
| Package Level 1 Gross Weight | 2.3 kg kg |
| Package Level 1 EAN | 7320500465585 |
| Package Level 1 Units | box 1 piece |
External Classifications and Standards
| Object Classification Code | Q |
| ETIM 7 | EC000640 - Soft starter |
| ETIM 8 | EC000640 - Soft starter |
| ETIM 9 | EC000640 - Soft starter |
| eClass | V11.0 : 27370907 |
| UNSPSC | 39121521 |
| IDEA Granular Category Code (IGCC) | 4740 >> Soft starter |
المزيد من قطع ABB
مستعملABB ACS401-0020-3-2 Used - With Damage