2-conductor through terminal block; 70 mm²; with screw-type connection; 70,00 mm²; blue
Teklif İsteyin
Hızlı bilgiler
| Uygunluk | Talep üzerine onaylanır |
| Kategori | Rail-Mount Terminal Blocks |
| Yaşam döngüsü | active |
| Garanti | 12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş) |
Gönderim ve uygunluk
883-7004 ne zaman gönderilebilir?
883-7004 talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.
883-7004 ürününü şahsen teslim alabilir miyim?
Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.
Ekspres teslimat mevcut mu?
Evet — 883-7004 için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.
Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?
Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak 883-7004 için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.
<h2>High-current terminal block, 883 Series, t-wrench und 6 mm</h2><br/><br/>This through terminal block (item number 883-7004) is designed to connect conductors quickly and easily. Strip lengths must be 22 mm when connecting conductors to this through terminal block. This product features conductor terminals and utilizes a screw connection. Products with screw-clamp connections are easy to reuse on-site, you can replace wires and devices using standard hand tools. Depending on the conductor type, this through terminal block is suitable for conductor cross sections ranging from 10 mm² to 95 mm².<br/><br/><h3></h3>
Teknik özellikler
Electrical data - Ratings per IEC/EN
| Ratings per | IEC/EN 60947-7-1 |
| Nominal voltage (III/3) | 1000 V |
| Rated impulse withstand voltage (III / 3) | 8 kV |
| Rated current | 192 A |
| Current at conductor cross-section (max.) mm² | 232 A |
| Legend (ratings) | (III / 3) ≙ Overvoltage category III / Pollution degree 3 |
| Ratings per | IEC/EN 60947-7-1 / IEC/EN 60947-7-1 / IEC/EN 60947-7-1 |
| Overvoltage category | III / III / II |
| Pollution degree | 3 / 2 / 2 |
| Nominal voltage | 1000 V |
| Rated impulse withstand voltage | 8 kV |
| Rated current | 192 A |
| Current at conductor cross-section (max.) mm² | 232 A |
Electrical data - Ratings per UL
| Approvals per | UL 1059 |
| Rated voltage UL (Use Group B) | 600 V |
| Rated current UL (Use Group B) | 205 A |
| Rated voltage UL (Use Group C) | 600 V |
| Rated current UL (Use Group C) | 205 A |
| Rated voltage UL (Use Group D) | 600 V |
| Rated current UL (Use Group D) | 205 A |
| Approvals per | UL 1059 / UL 1059 / UL 1059 |
| Use group | B / C / D |
| Rated voltage | 600 V / 600 V / 600 V |
| Rated current | 205 A / 205 A / 205 A |
Electrical data - Ratings per CSA
| Approvals per | CSA 22.2 No 158 |
| Rated voltage CSA (Use Group B) | 600 V |
| Rated current CSA (Use Group B) | 205 A |
| Rated voltage CSA (Use Group C) | 600 V |
| Rated current CSA (Use Group C) | 205 A |
| Rated voltage CSA (Use Group D) | 600 V |
| Rated current CSA (Use Group D) | 205 A |
| Approvals per | CSA 22.2 No 158 / CSA 22.2 No 158 / CSA 22.2 No 158 |
| Use group | B / C / D |
| Rated voltage | 600 V / 600 V / 600 V |
| Rated current | 205 A / 205 A / 205 A |
Electrical data - Power Loss
| Power loss, per pole (potential) | 6.267 W |
| Rated current I<sub>N</sub> for power loss specification | 192 A |
| Resistance value for specified, current-dependent power loss | 0 Ω |
Electrical data - General information
| Wiring direction | Side-entry wiring |
Connection data
| Clamping units | 2 |
| Total number of potentials | 1 |
| Number of levels | 1 |
| Number of jumper slots | 1 |
Connection data - Connection 1
| Connection technology | Screw connection |
| Actuation type | T-wrench; 6 mm |
| Connectable conductor materials | Copper, Aluminum |
| Connectable conductor materials (note) | Terminating Aluminum ConductorsBoth restrictions and application notes must be observed when terminating aluminum conductors. These instructions can be found in the WAGO Webshop under “Downloads – Documentation – Additional Information: Terminating Aluminum Conductors.” |
| Nominal cross-section | 70 mm² |
| Solid conductor | 10 … 95 mm² / 8 … 3/0 AWG |
| Stranded conductor | 10 … 95 mm² / 8 … 3/0 AWG |
| Fine-stranded conductor | 10 … 70 mm² / 8 … 2/0 AWG |
| Fine-stranded conductor; with insulated ferrule | 10 … 70 mm² / 8 … 2/0 AWG |
| Strip length | 22 mm / 0.87 inches |
| Wiring direction | Side-entry wiring |
| Screw thread | M8 |
Physical data
| Width | 20.5 mm / 0.807 inches |
| Height | 76.5 mm / 3.012 inches |
| Depth from upper-edge of DIN-rail | 84 mm / 3.307 inches |
Mechanical data
| Tightening torque | 6 … 12 Nm |
| Mounting type | DIN-35 rail, DIN-rail 35 x 7.5 |
| Marking level | Side marking |
Material data
| Note (material data) | Information on material specifications can be found here |
| Color | blue |
| Insulation material (main housing) | Polyamide (PA66) |
| Flammability class per UL94 | V0 |
| Weight | 141 g |
Environmental requirements
| Continuous operating temperature | -35 … +105 °C |
Commercial data
| PU (SPU) | 10 pcs |
| Packaging type | box |
| Country of origin | DE |
| GTIN | 4055143940924 |
| Customs tariff number | 85369010000 |
Product Classification
| UNSPSC | 39121410 |
| ETIM 9.0 | EC000897 |
| ETIM 10.0 | EC000897 |
| ECCN | NO US CLASSIFICATION |
Environmental Product Compliance
| RoHS Compliance Status | Compliant,No Exemption |
