Pepperl Fuchs WCS3B-LS1**
Teklif İsteyin
Hızlı bilgiler
| Uygunluk | Talep üzerine onaylanır |
| Kategori | Optical Linear Positioning Systems |
| Yaşam döngüsü | active |
| Garanti | 12 ay (yeni) · 3 ay (kullanılmış/yenilenmiş) |
Gönderim ve uygunluk
WCS3B-LS1** ne zaman gönderilebilir?
WCS3B-LS1** talep üzerine temin ediliyor — bir teklif isteyin, bu spesifik ürün için tam uygunluk ve gönderim süresini onaylayalım.
WCS3B-LS1** ürününü şahsen teslim alabilir miyim?
Groningen, Hollanda'daki depomuzdan şahsen teslim alma mümkün olabilir — sipariş vermeden önce uygunluğu kontrol etmek ve bir teslim alma zamanı ayarlamak için bizimle iletişime geçin.
Ekspres teslimat mevcut mu?
Evet — WCS3B-LS1** için teklif isterken bunu belirtin, yanıtımızda ekspres gönderim seçeneklerini de sunalım.
Fabrikamız durdu ve buna acilen ihtiyacımız var — yardımcı olabilir misiniz?
Kritik bir arıza durumunda doğrudan +31 (0)50-7110348 numarasından veya sales@partnerplc.com adresinden bizimle iletişime geçin — uygunluk ve varış yerine bağlı olarak WCS3B-LS1** için aynı gün kurye veya özel taşıma seçeneklerini değerlendirebiliriz.
Read head. Reading head, RS-485 interface, without RS-485 terminal resistor, RS-485 interface, Non-contact, absolute position encoder, Automatic detection of dirt accumulation, Output of position and speed. Passage speed: ≤ 12.5 m/s. Measuring length: max. 314.5 m. Free tolerances to code rail: horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ). Resolution: ± 0.4 mm (1,250 positions/m). Operation indicator: LED green: power on. Data flow indicator: LED yellow: data communication active. Velocity indicator: LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display). Error indicator: LED red flashing: read head outside of code rail solid on: internal diagnostic test failed. Display: Display module, 6-digit (only with option D, display) adaptable to installation position. Operating voltage: 10 ... 30 V DC. Power consumption: 2 VA with Option H, heating: 11 VA at 24 V DC. Interface type: RS 485 interface. Data output code: binary code. Transfer rate: Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order). Termination: without RS 485 termination. Output velocity: switching output , short-circuit protected (only with Option S, speed output). Switching voltage: Operating voltage. Emitted interference: DIN EN 61000-6-4 , DIN EN 12015. Noise immunity: DIN EN 61000-6-2 , DIN EN 12016. Shock resistance: DIN EN 60068-2-27, half sine 30 g, 18 ms. Vibration resistance: DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles. CSA approval: cCSAus Certified, General Purpose Class 2 power source. Operating temperature: 0 ... 60 °C (32 ... 140 °F) with Option H, heating: -40 ... 60 °C (-40 ... 140 °F). Storage temperature: -40 ... 85 °C (-40 ... 185 °F). Relative humidity: 90 % , noncondensing. Connection type: 5-pin, M12 x 1 connector. Degree of protection: IP54. Material: . HousingABS , PC (Polycarbonate): . Housing: ABS , PC (Polycarbonate). Mass: 500 g. Dimensions: . Height99 mmWidth90 mmLength115 mm: . Height: 99 mm. Width: 90 mm. Length: 115 mm. Ordering information: Mounting plate included with delivery
Teknik özellikler
General specifications
| Passage speed | ≤ 12.5 m/s v |
| Measuring length | max. 314.5 m |
| Free tolerances to code rail | horizontal: 31 mm ( ± 15.5 mm )vertical: 28 mm ( ± 14 mm ) |
| Resolution | ± 0.4 mm (1,250 positions/m) |
Indicators/operating means
| Operation indicator | LED green: power on |
| Data flow indicator | LED yellow: data communication active |
| Velocity indicator | LED yellow (only with Option S, speed output) off, if speed limit is exceeded (instead of data flow display) |
| Error indicator | LED red flashing: read head outside of code rail solid on: internal diagnostic test failed |
| Display | Display module, 6-digit (only with option D, display) adaptable to installation position |
Electrical specifications
| Operating voltage | 10 ... 30 V DC UB |
| Power consumption | 2 VA with Option H, heating: 11 VA at 24 V DC P0 |
Interface
| Interface type | RS 485 interface |
| Data output code | binary code |
| Transfer rate | Baud rate 19.2 kBit/s ... 187.5 kBit/s (to be specified with order) |
| Termination | without RS 485 termination |
Output
| Output velocity | switching output , short-circuit protected (only with Option S, speed output) |
| Switching voltage | Operating voltage |
Standard conformity
| Emitted interference | DIN EN 61000-6-4 , DIN EN 12015 |
| Noise immunity | DIN EN 61000-6-2 , DIN EN 12016 |
| Shock resistance | DIN EN 60068-2-27, half sine 30 g, 18 ms |
| Vibration resistance | DIN EN 60068-2-6, sine, 5 g, 10 - 2000 Hz, 10 cycles |
Approvals and certificates
| CSA approval | cCSAus Certified, General Purpose Class 2 power source |
Ambient conditions
| Operating temperature | 0 ... 60 °C (32 ... 140 °F) with Option H, heating: -40 ... 60 °C (-40 ... 140 °F) |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) |
| Relative humidity | 90 % , noncondensing |
Mechanical specifications
| Connection type | 5-pin, M12 x 1 connector |
| Degree of protection | IP54 |
| Material | |
| HousingABS , PC (Polycarbonate) | Housing |
| Housing | ABS , PC (Polycarbonate) |
| Mass | 500 g |
| Dimensions | |
| Height99 mmWidth90 mmLength115 mm | Height |
| Height | 99 mm |
| Width | 90 mm |
| Length | 115 mm |
General information
| Ordering information | Mounting plate included with delivery |
Daha fazla Pepperl Fuchs parçası
YeniPepperl + Fuchs KFD2-GUT-EX1.D New open box
Talep üzerine temin edilirPepperl Fuchs V19-W-BK15M-PUR-U-V19-G
Talep üzerine temin edilirPepperl Fuchs V1SD-G-GN65M-PUR-E1S-V45-G